Re: [Gluster-devel] glusterfs_1.4.0qa19: small issues

[Brent A Nelson]

On Mon, 9 Jun 2008, Amar S. Tumballi wrote:

> Hi Brent,
> Thanks for this report, we will try to fix it. This report is good enough
> to find the issue i believe.
>
> Regards,
> Amar

Just in case, here's also an strace snippet from a cp -a /usr/bin, showing 
a copy of the final file, onward to the last steps:

lstat64("/usr/bin/autoreconf", {st_mode=S_IFREG|0755, st_size=19885, ...}) 
= 0
open("/usr/bin/autoreconf", O_RDONLY|O_LARGEFILE|O_NOFOLLOW) = 3
fstat64(3, {st_mode=S_IFREG|0755, st_size=19885, ...}) = 0
open("bin/autoreconf", O_WRONLY|O_CREAT|O_EXCL|O_LARGEFILE, 0700) = 4
fstat64(4, {st_mode=S_IFREG|0700, st_size=0, ...}) = 0
read(3, "#! /usr/bin/perl -w\n# -*- perl -"..., 8192) = 8192
write(4, "#! /usr/bin/perl -w\n# -*- perl -"..., 8192) = 8192
read(3, "cal may produce no output.\n     "..., 8192) = 8192
write(4, "cal may produce no output.\n     "..., 8192) = 8192
read(3, "- #\n\n  # If we re-installed Libt"..., 8192) = 3501
write(4, "- #\n\n  # If we re-installed Libt"..., 3501) = 3501
SYS_320(0x4, 0, 0xbfb4dac4, 0, 0xb7f9aff4) = 0
fgetxattr(3, "system.posix_acl_access", 0xbfb4d9e0, 132) = -1 EOPNOTSUPP 
(Operation not supported)
fsetxattr(4, "system.posix_acl_access", 
"\x02\x00\x00\x00\x01\x00\x07\x00\xff\xff\xff\xff\x04\x00\x05\x00\xff\xff\xff\xff 
\x00\x05\x00\xff\xff\xff\xff", 28, 0) = 0
close(4)                                = 0
close(3)                                = 0
futimesat(AT_FDCWD, "bin", {1213039534, 0}) = 0
lchown32("bin", 0, 0)                   = 0
getxattr("/usr/bin", "system.posix_acl_access", 0xbfb4dd10, 132) = -1 
EOPNOTSUPP (Operation not supported)
setxattr("bin", "system.posix_acl_access", 
"\x02\x00\x00\x00\x01\x00\x07\x00\xff\xff\xff\xff\x04\x00\x05\x00\xff\xff\xff\xff 
\x00\x05\x00\xff\xff\xff\xff", 28, 0) = 0
removexattr("bin", "system.posix_acl_default") = -1 ENOENT (No such file 
or directory)

Thanks,

Brent