[Gnash] configure problem: QT-dev not found.

[Niklaus Giger]

Hi

I met Rob Savoy at FOSDEM last saturday and was excited about what he told
me about gnash. I would like to help out a little bit, as I think gnash is
a very important program. Not specially for me, as I am more a text
oriented guy. But my children prefer MacOSX because there is a flash player
and on the GNU/Debian side I try to avoid installing non free SW. And still
for my 16 year old niece from Korea which is living in our family in
Switzerland, there are quite a few Korean sites which do not work properly
even under MacOSX (MacMini Intel), as Korea is a > 99% WinTel territory.

Hearing that the OLPC will use gnash made it even more attractive to help to
try to help to make gnash a good replacement for the SWF.

I have no in-depth knowledge of any graphic library. But I think I could
help in areas like automated regression testing (e.g. I am running a
buildbot on http://ngiger.dyndns.org/buildbot for the Xenomai real time
framework for the Linux kernel, see http://www.xenomai.org). I also have a
few Mac Powerbook/PowerMac machines standing around.

As a first step I checkout the CVS repository, ran ./autogen.sh which
completed after spitting a few lines which I did not understand. 
>  ./autogen.sh
> Running libtoolize --force --ltdl --copy ...
> processing ./libltdl
> Running libtoolize --force --copy ...
> You should update your `aclocal.m4' by running aclocal.
> You should update your `aclocal.m4' by running aclocal.
> Running aclocal  ...
> /usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of
AM_PATH_SMPEG
>   run info '(automake)Extending aclocal'
>   or see
http://sources.redhat.com/automake/automake.html#Extending-aclocal
> Running autoheader...
> Running automake --add-missing --copy  ...
> Running autoconf ...
> processing .
> Running libtoolize --force --copy ...
> Running aclocal -I macros  ...
> /usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of
AM_PATH_SMPEG
>   run info '(automake)Extending aclocal'
>   or see
http://sources.redhat.com/automake/automake.html#Extending-aclocal
> Running autoheader...
> Running automake --add-missing --copy  ...
> Running autoconf ...

Running the resulting ./configure failed at the end with the following
lines:
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating config.h
> config.status: config.h is unchanged
> config.status: executing depfiles commands
> 
> Configurable options are:
>         Intel 810 LOD bias hack disabled (default).
Use --enable-i810-lod-bias to enable.
>         POSIX Threads support enabled (default)
>         Web server support disabled (default)
>         DMalloc support disabled (default). Use --enable-dmalloc to
enable.
>         Firefox plugin enabled (default). Use --disable-plugin to disable.
>         Konqueror plugin enabled (default). Use --disable-klash to disable
>         GNOME help disabled (default). Use --enable-ghelp to enable.
>         Building Gnash extensions disabled.
>         Building Cygnal media server enabled (default).
Use --disable-cygnal to disable.
>         Building Flash debugger support (default). Use --disable-debugger
to disable.
>         Renderer engine: opengl
>         GUI: gtk
>         Sound handler: none
> 
> Configured paths for i686-pc-linux-gnu are:
>         DocBook document processing disabled (default)
>         XML flags are: -I/usr/include/libxml2
>         XML libs are:  -lxml2
>         KDE flags are: -I/usr/include/kde -I/usr/include/kde/kio
>         KDE libs are: -lkdeui -lkdecore -lkdeprint
>         ERROR: No QT development package installed!
>                Reconfigure with --disable-klash to continue
>                and/or change to a different gui
>         JPEG flags are: default include path
>         JPEG libs are: -ljpeg
>         OpenGL flags are: default include path
>         OpenGL libs are: -lGL -lGLU
>         GtkGLExt flags
are: -I/usr/include/gtkglext-1.0 -I/usr/lib/gtkglext-1.0/include 
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/cairo 
-I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/atk-1.0
>         GtkGLExt libs
are: -Wl,--export-dynamic -lgtkglext-x11-1.0 -lgdkglext-x11-1.0 -lGLU -lGL 
-lXmu -lXt -lSM -lICE -lgtk-x11-2.0 -lpangox-1.0 -lgdk-x11-2.0 -latk-1.0 
-lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lfontconfig -lXext -lXrender -lXinerama 
-lXi -lXrandr -lXcursor -lXfixes -lpango-1.0 -lcairo -lX11 -lgobject-2.0 
-lgmodule-2.0 -ldl -lglib-2.0
>         GTK2 flags
are: -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 
-I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 
-I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12
>         GTK2 libs
are: -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm 
-lpangocairo-1.0 -lfontconfig -lXext -lXrender -lXinerama -lXi -lXrandr 
-lXcursor -lXfixes -lpango-1.0 -lcairo -lX11 -lgobject-2.0 -lgmodule-2.0 -ldl 
-lglib-2.0
>         Pango flags
are: -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 
-I/usr/lib/glib-2.0/include
>         Pango libs
are: -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
>         GLib flags
are: -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
>         GLib libs are: -lglib-2.0
>         ATK flags
are: -I/usr/include/atk-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
>         ATK libs
are: -latk-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
>         Plugin will be installed in /home/niklaus/.firefox/plugins
>         POSIX Threads flags are: -pthread
>         POSIX Threads lib is: -lpthread
>         This version of libCurl doesn't have RTMP support
>         CURL flags are: default include path
>         CURL libs
are: -L/usr/lib -lcurl -L/usr/lib -lgssapi_krb5 -lkrb5 -lk5crypto -lkrb5support 
-lcom_err -lresolv -lidn -ldl -lgnutls -lz
> ERROR: No BOOST development package installed! You need to have the BOOST
development package installed to compile, or install libboost-thread-dev
and libboost-date-time-dev (using apt-get) or boost-devel (using yum).
>         JPEG flags are:
>         JPEG libs are: -ljpeg
> Warning: You need to have the Ming development and utilities packages
installed to run most of the tests in Gnash testsuite. Some of the tests
will be run anyway.
> Warning: You need to have the MTASC compiler packages installed to run
some of the tests in Gnash testsuite.
>         Z flags are: default include path
>         Z libs are: -lz
>         KDE flags are: -I/usr/include/kde -I/usr/include/kde/kio
>         KDE libs are: -lkdeui -lkdecore -lkdeprint
>         ERROR: No QT development package installed!
>                Reconfigure with --disable-klash to continue
>                and/or change to a different gui
I am running GNU/Debian testing on a MacMini Intel. And I have the following
QT-dev packages installed:
> ii  libavahi-qt3-dev 0.6.16-2       Development headers for the Avahi Qt3
integration library
> ii  libqt3-mt-dev    3.3.7-3        Qt development files (Threaded)
> ii  libqt4-dev       4.2.1-2+b1     Qt 4 development files
> ii  qt3-dev-tools    3.3.7-3        Qt3 development tools
> ii  qt4-dev-tools    4.2.1-2+b1     Qt 4 development tools
What is wrong with my setup? Or is this a configure error?

Any hints would be greatly appreciated.

Best regards

Niklaus Giger