[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gNewSense-users] network connection
|
From: |
dajo |
|
Subject: |
Re: [gNewSense-users] network connection |
|
Date: |
Sat, 6 Mar 2010 10:48:42 -0700 |
|
User-agent: |
SquirrelMail/1.4.19 |
Thank you for the replies. Here are three sets of data. Output from
lspci, which is character-identical from both systems; dmesg from
gNewSense - nothing about eth0; dmesg from Mandriva - entries about eth0.
One other question I have is where do I find information on kernel
parameters? I just guessed when I set up the boot line in grub. Come to
think of it, here is my grub/menu.lst:
dajo
timeout 10
color black/cyan yellow/cyan
default 0
title linux
kernel (hd0,0)/vmlinuz BOOT_IMAGE=linux root=/dev/hda5 resume=/dev/hda9
splash=silent vga=788
initrd (hd0,0)/initrd.img
title gNewSense
kernel (hd2,0)/vmlinuz BOOT_IMAGE=linux root=/dev/sdb1 resume=/dev/sdb5
initrd (hd2,0)/initrd.img
title linux-nonfb
kernel (hd0,0)/vmlinuz BOOT_IMAGE=linux-nonfb root=/dev/hda5
resume=/dev/hda9
initrd (hd0,0)/initrd.img
title failsafe
kernel (hd0,0)/vmlinuz BOOT_IMAGE=failsafe root=/dev/hda5 failsafe
initrd (hd0,0)/initrd.img
title FreeBSD
root (hd0,1)
chainloader +1
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port
(rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600]
(rev a2)
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5789 Gigabit
Ethernet PCI Express (rev 11)
04:06.0 RAID bus controller: Integrated Technology Express, Inc.
IT/ITE8212 Dual channel ATA RAID controller (rev 13)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-24-generic (address@hidden) (gcc version
4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Sep 10 19:00:20 UTC 2009 (Ubuntu
2.6.24-24.59gnewsense9-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5090
[ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524272
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524272
[ 0.000000] On node 0 totalpages: 524272
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292593 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6A00 checksum 0
[ 0.000000] ACPI: RSDP 000F6A00, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 7FFF3040, 0038 (r1 GBT AWRDACPI 42302E31 AWRD
1010101)
[ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 GBT AWRDACPI 42302E31 AWRD
1010101)
[ 0.000000] ACPI: DSDT 7FFF3180, 3A27 (r1 GBT AWRDACPI 1000 MSFT
100000C)
[ 0.000000] ACPI: FACS 7FFF0000, 0040
[ 0.000000] ACPI: MCFG 7FFF6CC0, 003C (r1 GBT AWRDACPI 42302E31 AWRD
1010101)
[ 0.000000] ACPI: APIC 7FFF6C00, 0068 (r1 GBT AWRDACPI 42302E31 AWRD
1010101)
[ 0.000000] ACPI: SSDT 7FFF6D40, 015C (r1 PmRef Cpu0Ist 3000 INTL
20040311)
[ 0.000000] ACPI: SSDT 7FFF71D0, 0167 (r1 PmRef CpuPm 3000 INTL
20040311)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:70000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 520177
[ 0.000000] Kernel command line: BOOT_IMAGE=linux root=/dev/sdb1
resume=/dev/sdb5
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 3014.567 MHz processor.
[ 27.268619] Console: colour VGA+ 80x25
[ 27.268623] console [tty0] enabled
[ 27.271536] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 27.271897] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 27.394794] Memory: 2067312k/2097088k available (2178k kernel code,
28460k reserved, 1013k data, 368k init, 1179584k highmem)
[ 27.394866] virtual kernel memory layout:
[ 27.394868] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 27.394869] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 27.394870] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 27.394871] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 27.394872] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
[ 27.394873] .data : 0xc03208e8 - 0xc041ddc4 (1013 kB)
[ 27.394873] .text : 0xc0100000 - 0xc03208e8 (2178 kB)
[ 27.395235] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 27.395360] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=2, Nodes=1
[ 27.475280] Calibrating delay using timer specific routine.. 6034.97
BogoMIPS (lpj=12069958)
[ 27.475394] Security Framework initialized
[ 27.475443] SELinux: Disabled at boot.
[ 27.475500] AppArmor: AppArmor initialized
[ 27.475547] Failure registering capabilities with primary security module.
[ 27.475602] Mount-cache hash table entries: 512
[ 27.475769] Initializing cgroup subsys ns
[ 27.475817] Initializing cgroup subsys cpuacct
[ 27.475874] CPU: After generic identify, caps: bfebfbff 20100000
00000000 00000000 0000649d 00000000 00000000 00000000
[ 27.475883] monitor/mwait feature present.
[ 27.475928] using mwait in idle threads.
[ 27.475977] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 27.476054] CPU: L2 cache: 2048K
[ 27.476099] CPU: Physical Processor ID: 0
[ 27.476145] CPU: After all inits, caps: bfebfbff 20100000 00000000
00043180 0000649d 00000000 00000000 00000000
[ 27.476155] Compat vDSO mapped to ffffe000.
[ 27.476214] Checking 'hlt' instruction... OK.
[ 27.491741] SMP alternatives: switching to UP code
[ 27.493663] Early unpacking initramfs... done
[ 27.780713] ACPI: Core revision 20070126
[ 27.780804] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 27.835773] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[ 27.835896] SMP alternatives: switching to SMP code
[ 27.836715] Booting processor 1/1 eip 3000
[ 27.847110] Initializing CPU#1
[ 27.926382] Calibrating delay using timer specific routine.. 6029.46
BogoMIPS (lpj=12058923)
[ 27.926392] CPU: After generic identify, caps: bfebfbff 20100000
00000000 00000000 0000649d 00000000 00000000 00000000
[ 27.926400] monitor/mwait feature present.
[ 27.926407] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 27.926409] CPU: L2 cache: 2048K
[ 27.926412] CPU: Physical Processor ID: 0
[ 27.926415] CPU: After all inits, caps: bfebfbff 20100000 00000000
00043180 0000649d 00000000 00000000 00000000
[ 27.926943] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[ 27.927370] Total of 2 processors activated (12064.44 BogoMIPS).
[ 27.927566] ENABLING IO-APIC IRQs
[ 27.927784] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 28.074229] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 28.094282] Brought up 2 CPUs
[ 28.094352] CPU0 attaching sched-domain:
[ 28.094356] domain 0: span 03
[ 28.094358] groups: 01 02
[ 28.094361] domain 1: span 03
[ 28.094363] groups: 03
[ 28.094366] CPU1 attaching sched-domain:
[ 28.094368] domain 0: span 03
[ 28.094370] groups: 02 01
[ 28.094373] domain 1: span 03
[ 28.094375] groups: 03
[ 28.094646] net_namespace: 64 bytes
[ 28.094696] Booting paravirtualized kernel on bare hardware
[ 28.095342] Time: 16:41:03 Date: 03/06/10
[ 28.095410] NET: Registered protocol family 16
[ 28.095721] EISA bus registered
[ 28.095771] ACPI: bus type pci registered
[ 28.102441] PCI: PCI BIOS revision 3.00 entry at 0xfb110, last bus=4
[ 28.102490] PCI: Using configuration type 1
[ 28.102538] Setting up standard PCI resources
[ 28.105497] ACPI: EC: Look up EC in DSDT
[ 28.109423] ACPI: Interpreter enabled
[ 28.109470] ACPI: (supports S0 S1 S4 S5)
[ 28.109646] ACPI: Using IOAPIC for interrupt routing
[ 28.114985] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 28.115653] Force enabled HPET at base address 0xfed00000
[ 28.115659] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 28.115710] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 28.116462] PCI: Transparent bridge - 0000:00:1e.0
[ 28.116542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 28.116683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 28.116757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 28.116834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 28.126164] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12
14 15)
[ 28.126702] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12
14 15) *0, disabled.
[ 28.127298] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12
14 15)
[ 28.127831] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12
14 15)
[ 28.128365] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12
14 15) *0, disabled.
[ 28.128966] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12
14 15) *0, disabled.
[ 28.129562] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12
14 15)
[ 28.130103] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12
14 15)
[ 28.130693] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 28.130780] pnp: PnP ACPI init
[ 28.130832] ACPI: bus type pnp registered
[ 28.133903] pnpacpi: exceeded the max number of mem resources: 12
[ 28.134127] pnp: PnP ACPI: found 16 devices
[ 28.134173] ACPI: ACPI bus type pnp unregistered
[ 28.134223] PnPBIOS: Disabled by ACPI PNP
[ 28.134568] PCI: Using ACPI for IRQ routing
[ 28.134616] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 28.173918] NET: Registered protocol family 8
[ 28.173965] NET: Registered protocol family 20
[ 28.174129] hpet clockevent registered
[ 28.174135] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 28.174301] hpet0: 3 64-bit timers, 14318180 Hz
[ 28.175380] AppArmor: AppArmor Filesystem Enabled
[ 28.177908] Time: tsc clocksource has been installed.
[ 28.189936] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 28.189992] system 00:01: ioport range 0x290-0x29f has been reserved
[ 28.190041] system 00:01: ioport range 0x800-0x87f has been reserved
[ 28.190090] system 00:01: ioport range 0x880-0x88f has been reserved
[ 28.190150] system 00:0c: ioport range 0x400-0x4bf could not be reserved
[ 28.190204] system 00:0d: iomem range 0xf0000000-0xf3ffffff could not
be reserved
[ 28.190268] system 00:0e: iomem range 0xd1a00-0xd3fff has been reserved
[ 28.190317] system 00:0e: iomem range 0xf0000-0xf7fff could not be
reserved
[ 28.190367] system 00:0e: iomem range 0xf8000-0xfbfff could not be
reserved
[ 28.190416] system 00:0e: iomem range 0xfc000-0xfffff could not be
reserved
[ 28.190465] system 00:0e: iomem range 0x7fff0000-0x7fffffff could not
be reserved
[ 28.190524] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 28.190573] system 00:0e: iomem range 0x100000-0x7ffeffff could not be
reserved
[ 28.190633] system 00:0e: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 28.190692] system 00:0e: iomem range 0xfed13000-0xfed1dfff could not
be reserved
[ 28.190751] system 00:0e: iomem range 0xfed20000-0xfed8ffff could not
be reserved
[ 28.192274] system 00:0e: iomem range 0xfee00000-0xfee00fff could not
be reserved
[ 28.192334] system 00:0e: iomem range 0xffb00000-0xffb7ffff could not
be reserved
[ 28.222886] PCI: Bridge: 0000:00:01.0
[ 28.222932] IO window: disabled.
[ 28.222979] MEM window: e0000000-e7ffffff
[ 28.223026] PREFETCH window: d0000000-dfffffff
[ 28.223074] PCI: Bridge: 0000:00:1c.0
[ 28.223120] IO window: 8000-8fff
[ 28.223167] MEM window: disabled.
[ 28.223213] PREFETCH window: disabled.
[ 28.223260] PCI: Bridge: 0000:00:1c.2
[ 28.223305] IO window: disabled.
[ 28.223352] MEM window: e9000000-e90fffff
[ 28.223398] PREFETCH window: disabled.
[ 28.223447] PCI: Bridge: 0000:00:1e.0
[ 28.223494] IO window: 9000-afff
[ 28.223541] MEM window: e8000000-e8ffffff
[ 28.223588] PREFETCH window: disabled.
[ 28.223648] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 28.223739] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 28.223759] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 28.223850] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 28.223870] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low)
-> IRQ 17
[ 28.223961] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 28.223972] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 28.223983] NET: Registered protocol family 2
[ 28.261822] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 28.262169] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 28.262796] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 28.263125] TCP: Hash tables configured (established 131072 bind 65536)
[ 28.263174] TCP reno registered
[ 28.273897] checking if image is initramfs... it is
[ 28.673165] Switched to high resolution mode on CPU 1
[ 28.676940] Switched to high resolution mode on CPU 0
[ 28.836482] Freeing initrd memory: 7069k freed
[ 28.837450] audit: initializing netlink socket (disabled)
[ 28.837512] audit(1267893663.272:1): initialized
[ 28.837806] highmem bounce pool size: 64 pages
[ 28.840306] VFS: Disk quotas dquot_6.5.1
[ 28.840443] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 28.840642] io scheduler noop registered
[ 28.840689] io scheduler anticipatory registered
[ 28.840735] io scheduler deadline registered
[ 28.840790] io scheduler cfq registered (default)
[ 28.840933] Boot video device is 0000:01:00.0
[ 28.841059] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 28.841102] assign_interrupt_mode Found MSI capability
[ 28.841182] Allocate Port Service[0000:00:01.0:pcie00]
[ 28.841276] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 28.841321] assign_interrupt_mode Found MSI capability
[ 28.841402] Allocate Port Service[0000:00:1c.0:pcie00]
[ 28.841447] Allocate Port Service[0000:00:1c.0:pcie02]
[ 28.841557] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 28.841602] assign_interrupt_mode Found MSI capability
[ 28.841683] Allocate Port Service[0000:00:1c.2:pcie00]
[ 28.841728] Allocate Port Service[0000:00:1c.2:pcie02]
[ 28.841994] isapnp: Scanning for PnP cards...
[ 29.193013] isapnp: No Plug & Play device found
[ 29.229113] Real Time Clock Driver v1.12ac
[ 29.229284] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 29.229472] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.229665] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 29.230357] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.230668] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 29.232230] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 29.232372] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 29.232563] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 29.235694] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.235753] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 29.255786] mice: PS/2 mouse device common for all mice
[ 29.255986] EISA: Probing bus 0 at eisa.0
[ 29.256058] Cannot allocate resource for EISA slot 8
[ 29.256105] EISA: Detected 0 cards.
[ 29.256151] cpuidle: using governor ladder
[ 29.256196] cpuidle: using governor menu
[ 29.256317] NET: Registered protocol family 1
[ 29.256391] Using IPI No-Shortcut mode
[ 29.256501] swsusp: Resume From Partition /dev/sdb5
[ 29.256503] PM: Checking swsusp image.
[ 29.256510] swsusp: Error -6 check for resume file
[ 29.256512] PM: Resume from disk failed.
[ 29.256532] registered taskstats version 1
[ 29.256676] Magic number: 2:261:691
[ 29.256786] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 29.256833] EDD information not available.
[ 29.257061] Freeing unused kernel memory: 368k freed
[ 29.257131] Write protecting the kernel read-only data: 808k
[ 29.275839] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 29.461203] fuse init (API version 7.9)
[ 29.482189] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 29.482447] ACPI: SSDT 7FFF7140, 0087 (r1 PmRef Cpu1Ist 3000 INTL
20040311)
[ 29.482710] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 29.674621] usbcore: registered new interface driver usbfs
[ 29.674716] usbcore: registered new interface driver hub
[ 29.675446] usbcore: registered new device driver usb
[ 29.686848] USB Universal Host Controller Interface driver v3.0
[ 29.686971] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low)
-> IRQ 18
[ 29.687085] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 29.687091] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 29.687363] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 29.687457] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bc00
[ 29.687711] usb usb1: configuration #1 chosen from 1 choice
[ 29.687800] hub 1-0:1.0: USB hub found
[ 29.687859] hub 1-0:1.0: 2 ports detected
[ 29.794680] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low)
-> IRQ 19
[ 29.794789] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 29.794795] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 29.794874] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 29.794965] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[ 29.795178] usb usb2: configuration #1 chosen from 1 choice
[ 29.795264] hub 2-0:1.0: USB hub found
[ 29.795319] hub 2-0:1.0: 2 ports detected
[ 29.898472] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low)
-> IRQ 17
[ 29.898581] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 29.898587] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 29.898673] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 29.898765] uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000b400
[ 29.898980] usb usb3: configuration #1 chosen from 1 choice
[ 29.899068] hub 3-0:1.0: USB hub found
[ 29.899121] hub 3-0:1.0: 2 ports detected
[ 30.007238] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low)
-> IRQ 16
[ 30.007346] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 30.007351] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 30.007431] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 30.007528] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[ 30.007756] usb usb4: configuration #1 chosen from 1 choice
[ 30.007855] hub 4-0:1.0: USB hub found
[ 30.007912] hub 4-0:1.0: 2 ports detected
[ 30.031330] SCSI subsystem initialized
[ 30.067377] libata version 3.00 loaded.
[ 30.111184] pata_it821x: controller in smart mode.
[ 30.111264] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 22 (level, low)
-> IRQ 20
[ 30.111407] PCI: Setting latency timer of device 0000:04:06.0 to 64
[ 30.115713] scsi0 : pata_it821x
[ 30.116855] scsi1 : pata_it821x
[ 30.116953] ata1: PATA max MWDMA2 cmd 0x9010 ctl 0x9400 bmdma 0xa000
irq 20
[ 30.117007] ata2: PATA max MWDMA2 cmd 0x9810 ctl 0x9c00 bmdma 0xa008
irq 20
[ 30.151503] Floppy drive(s): fd0 is 1.44M
[ 30.173477] FDC 0 is a post-1991 82077
[ 31.404486] ata1.00: ATA-7: Maxtor 6L200P0, BAJ41G20, max UDMA/133
[ 31.404540] ata1.00: 398297088 sectors, multi 0: LBA48
[ 31.404610] ata1.01: ATA-7: ST3160215A, 3.AAD, max UDMA/100
[ 31.404658] ata1.01: 312581808 sectors, multi 16: LBA48
[ 31.404716] ata1.00: configured for DMA
[ 31.404760] ata1.01: configured for DMA
[ 31.559076] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L200P0
BAJ4 PQ: 0 ANSI: 5
[ 31.559305] scsi 0:0:1:0: Direct-Access ATA ST3160215A
3.AA PQ: 0 ANSI: 5
[ 31.559602] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low)
-> IRQ 17
[ 31.559736] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 31.559754] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 31.559836] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low)
-> IRQ 19
[ 31.559974] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 31.559990] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 31.560221] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low)
-> IRQ 18
[ 31.560324] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 31.560330] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 31.560416] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 31.564403] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 31.564415] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xe9104000
[ 31.578865] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 31.579091] usb usb5: configuration #1 chosen from 1 choice
[ 31.579178] hub 5-0:1.0: USB hub found
[ 31.579233] hub 5-0:1.0: 8 ports detected
[ 31.579863] Driver 'sd' needs updating - please use bus_type methods
[ 31.580020] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors
(203928 MB)
[ 31.580096] sd 0:0:0:0: [sda] Write Protect is off
[ 31.580153] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 31.580192] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 31.580343] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors
(203928 MB)
[ 31.580425] sd 0:0:0:0: [sda] Write Protect is off
[ 31.580481] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 31.581444] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 31.583012] sda: sda1
[ 31.604888] sd 0:0:0:0: [sda] Attached SCSI disk
[ 31.605020] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors
(160042 MB)
[ 31.605094] sd 0:0:1:0: [sdb] Write Protect is off
[ 31.605145] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 31.605182] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 31.605314] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors
(160042 MB)
[ 31.605385] sd 0:0:1:0: [sdb] Write Protect is off
[ 31.605435] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 31.605473] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 31.605539] sdb: sdb1 sdb2 < sdb5 >
[ 31.645336] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 31.653054] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 31.653138] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 31.689808] ata_piix 0000:00:1f.1: version 2.12
[ 31.689830] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low)
-> IRQ 17
[ 31.689982] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 31.692868] scsi2 : ata_piix
[ 31.693049] scsi3 : ata_piix
[ 31.693998] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
irq 14
[ 31.694052] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008
irq 15
[ 32.130198] ata3.00: ATA-7: Maxtor 6K040L0, NAR61HA0, max UDMA/133
[ 32.130253] ata3.00: 80293248 sectors, multi 16: LBA
[ 32.130330] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1693S, KS04, max UDMA/66
[ 32.146107] ata3.00: configured for UDMA/100
[ 32.318606] ata3.01: configured for UDMA/66
[ 32.356610] Attempting manual resume
[ 32.356657] swsusp: Resume From Partition 8:21
[ 32.356659] PM: Checking swsusp image.
[ 32.356963] PM: Resume from disk failed.
[ 32.414420] kjournald starting. Commit interval 5 seconds
[ 32.414429] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.487269] scsi 2:0:0:0: Direct-Access ATA Maxtor 6K040L0
NAR6 PQ: 0 ANSI: 5
[ 32.487429] sd 2:0:0:0: [sdc] 80293248 512-byte hardware sectors (41110
MB)
[ 32.487496] sd 2:0:0:0: [sdc] Write Protect is off
[ 32.487546] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 32.487579] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 32.487701] sd 2:0:0:0: [sdc] 80293248 512-byte hardware sectors (41110
MB)
[ 32.487767] sd 2:0:0:0: [sdc] Write Protect is off
[ 32.487815] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 32.487849] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 32.487912] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11
> sdc4
[ 34.709135] sdc2: <bsd: sdc12 sdc13 sdc14 sdc15 >
[ 34.709635] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 34.709726] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 34.710584] scsi 2:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1693S
KS04 PQ: 0 ANSI: 5
[ 34.710717] scsi 2:0:1:0: Attached scsi generic sg3 type 5
[ 34.710796] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 34.711013] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low)
-> IRQ 19
[ 34.711137] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 34.711185] scsi4 : ata_piix
[ 34.711279] scsi5 : ata_piix
[ 34.711849] ata5: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000
irq 19
[ 34.711900] ata6: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008
irq 19
[ 37.399992] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 38.022600] Linux agpgart interface v0.102
[ 38.110484] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.234165] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.278481] intel_rng: FWH not detected
[ 38.401929] input: Power Button (FF) as /devices/virtual/input/input3
[ 38.417681] ACPI: Power Button (FF) [PWRF]
[ 38.417820] input: Power Button (CM) as /devices/virtual/input/input4
[ 38.433642] ACPI: Power Button (CM) [PWRB]
[ 38.621357] iTCO_vendor_support: vendor-support=0
[ 38.689211] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 38.689376] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0460)
[ 38.689476] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.663154] Driver 'sr' needs updating - please use bus_type methods
[ 39.688563] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 39.688622] Uniform CD-ROM driver Revision: 3.20
[ 39.688970] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 39.794713] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[ 39.817180] parport_pc 00:09: reported by Plug and Play ACPI
[ 39.817284] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 40.019808] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 40.019930] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.051132] hda_codec: Unknown model for ALC882, trying auto-probe from
BIOS...
[ 41.430338] lp0: using parport0 (interrupt-driven).
[ 41.496136] Adding 6080560k swap on /dev/sdb5. Priority:-1 extents:1
across:6080560k
[ 41.802371] EXT3 FS on sdb1, internal journal
[ 42.525197] ip_tables: (C) 2000-2006 Netfilter Core Team
Linux version 2.6.22.9-desktop-1mdv (address@hidden) (gcc
version 4.2.2 20070909 (prerelease) (4.2.2-0.RC.1mdv2008.0)) #1 SMP Thu
Sep 27 04:07:04 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5090
Entering add_active_range(0, 0, 524272) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 524272
early_node_map[1] active PFN ranges
0: 0 -> 524272
On node 0 totalpages: 524272
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2303 pages used for memmap
HighMem zone: 292593 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP 000F6A00, 0014 (r0 GBT )
ACPI: RSDT 7FFF3040, 0038 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: FACP 7FFF30C0, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: DSDT 7FFF3180, 3A27 (r1 GBT AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 7FFF0000, 0040
ACPI: MCFG 7FFF6CC0, 003C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: APIC 7FFF6C00, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: SSDT 7FFF6D40, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311)
ACPI: SSDT 7FFF71D0, 0167 (r1 PmRef CpuPm 3000 INTL 20040311)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists. Total pages: 520177
Kernel command line: BOOT_IMAGE=linux root=/dev/hda5 resume=/dev/hda9
splash=silent vga=788
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3014.633 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073544k/2097088k available (2139k kernel code, 21724k reserved,
691k data, 280k init, 1179584k highmem, 0k BadRAM)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03ca000 - 0xc0410000 ( 280 kB)
.data : 0xc0316d67 - 0xc03c3c84 ( 691 kB)
.text : 0xc0100000 - 0xc0316d67 (2139 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6032.63 BogoMIPS
(lpj=3016316)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000649d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000649d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
Freeing initrd memory: 849k freed
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6028.14 BogoMIPS
(lpj=3014071)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000649d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000649d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Total of 2 processors activated (12060.77 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub
without MMCONFIG support.
PCI: PCI BIOS revision 3.00 entry at 0xfb110, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
ACPI: RTC can wake from S4
pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved
pnp: 00:0e: iomem range 0xd1a00-0xd3fff has been reserved
pnp: 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e0000000-e7ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: 8000-8fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: e9000000-e90fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 9000-afff
MEM window: e8000000-e8ffffff
PREFETCH window: 88000000-880fffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1267894537.240:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k,
total 262144k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d5c0
vesafb: pmi: set display start = c00cd5f6, set palette = c00cd660
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce
3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
222382 bytes,<6>...found (800x600, 222334 bytes, v3).
Console: switching to colour frame buffer device 93x31
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Freeing unused kernel memory: 280k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6K040L0, ATA DISK drive
hdb: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
hda: selected mode 0x45
hdb: selected mode 0x44
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
Probing IDE interface ide1...
IT8212: IDE controller at PCI slot 0000:04:06.0
ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 22 (level, low) -> IRQ 18
IT8212: chipset revision 19
it821x: controller in smart mode.
IT8212: 100% native mode on irq 18
ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio, hdf:DMA
ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: Maxtor 6L200P0, ATA DISK drive
hdf: ST3160215A, ATA DISK drive
hde: Performing identify fixups.
hdf: Performing identify fixups.
hde: selected mode 0x22
hdf: selected mode 0x22
ide2 at 0x9010-0x9017,0x9402 on irq 18
Probing IDE interface ide3...
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > hda4
hda2: <bsd: hda12 hda13 hda14 hda15 >
hde: max request size: 128KiB
hde: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, DMA
hde:hde: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hde: recal_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: unknown
hde1
hdf: max request size: 128KiB
hdf: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, DMA
hdf:hdf: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hdf: recal_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: unknown
hdf1 hdf2 < hdf5 >
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
Linux agpgart interface v0.102 (c) Dave Jones
eth0: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCI Express)
10/100/1000Base-T Ethernet 00:14:85:39:83:ad
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe9104000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000b400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: SSDT 7FFF7140, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
ACPI: Processor [CPU1] (supports 2 throttling states)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001d402 bmdma 0x0001e000 irq 19
ata2: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001dc02 bmdma 0x0001e008 irq 19
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
address@hidden
EXT3 FS on hda5, internal journal
Adding 5116660k swap on /dev/hda9. Priority:-1 extents:1 across:5116660k
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hde1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: module loaded
On Fri, 5 Mar 2010 22:36:55 -0800
Jason Self <address@hidden> wrote:
> On Fri, Mar 5, 2010 at 9:32 PM, <address@hidden> wrote:
> > I have installed gNewSense 2.3 on a computer running Mandriva 2008.
> > I bought a new hard disc, which I dedicated to gNewSense which I
> > boot through grub in my Mandriva boot partition on another disc.
> > It all seems to be working properly except that I have no network
> > connection of any kind under gNewSense. The only connection that
> > shows in the <forgotten its name> administration window is ppp.
> > The computer is on a local ethernet network of two computers and
> > two printers, and connection to the outside world is through a
> > linksys switch, all of which works, and has worked for along time,
> > under Mandriva. I cannot find any way of telling gNewSense that
> > eth0 is out there. Any suggestions? dajo
>
> Just as generic advice it's possible that a newer kernel might help.
> Try this one: http://aligunduz.org/gNewSense/
While valid advice...
> If that doesn't work it would be helpful if you could describe your
> hardware in more detail, like perhaps the output of lspci or dmesg.
This question/suggestion should probably come first :)
kk
--
Karl Goetz, (Kamping_Kaiser / VK5FOSS)
Debian contributor / gNewSense Maintainer
Re: [gNewSense-users] network connection, dajo, 2010/03/07