Re: OpenBSD cvs compile works - but I have a new problem now.

[nemir nemiria]

> > The test for pthreads in configure.in doesn't seem to work so good,  so 
> it's
> > been rewritten.  Also,  the @LTLIBINTL@ used in MAkefile.global was 
> never
> > expanded by configure.   And isn't used anywhere else that I could find.
> > The line that says:
> >
> >         LIBS += @LTLIBINTL@
> >
> > now says:
> >
> >         LIBS += -lintl
>
> This is wrong. Probably AM_GNU_GETTEXT macro gets unresolved. Could you
> post somewhere config.log and such? And full output of autogen.sh script?


I have attached a tgz of the full output from autogen.sh as well as the 
config.log.


> The debug output is a bit strange. Could you please post such output from
> --identify? Which cable do you use?

 I cannot say at this stage what the cable type is.  What types are there?  
How can I tell one type from the others?  Perhaps I can tell you what type 
from my memory of it.


Debug output of the gnokii --identify command is:

~$>gnokii --identify
GNOKII Version 0.6.1
LOG: debug mask is 0x1
phone instance config:
model: 7110
port_device: /dev/tty00
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Connecting
Serial device: opening device /dev/tty00
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
[Received Ack of type 1b, seq: 80]
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
[Received Ack of type 1b, seq: 82]
[Sending Ack of type 1b, seq: 5]
Message received: 0x1b / 0x000a
01 2f 00 f0 01 03 00 00 00 00                   |  / ð
Received message type 1b
Unknown subtype of type 0x1b (240)
UNHANDLED FRAME RECEIVED
request: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
reply: 0x1b / 0x000a
01 2f 00 f0 01 03 00 00 00 00                   |  / ð
Please read Docs/Bugs and send a bug report!
Serial device: opening device /dev/tty00
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
[Received Ack of type 1b, seq: 80]
[Sending Ack of type 1b, seq: 6]
Message received: 0x1b / 0x000a
01 2f 00 f0 01 03 00 00 00 00                   |  / ð
Received message type 1b
Unknown subtype of type 0x1b (240)
UNHANDLED FRAME RECEIVED
request: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
reply: 0x1b / 0x000a
01 2f 00 f0 01 03 00 00 00 00                   |  / ð
Please read Docs/Bugs and send a bug report!
Serial device: opening device /dev/tty00
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
[Received Ack of type 1b, seq: 80]
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
[Received Ack of type 1b, seq: 82]
[Sending Ack of type 1b, seq: 7]
Message received: 0x1b / 0x000a
01 2f 00 f0 01 03 00 00 00 00                   |  / ð
Received message type 1b
Unknown subtype of type 0x1b (240)
UNHANDLED FRAME RECEIVED
request: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
reply: 0x1b / 0x000a
01 2f 00 f0 01 03 00 00 00 00                   |  / ð
Please read Docs/Bugs and send a bug report!
IMEI         : (unknown)
Manufacturer : (unknown)
Model        : (unknown)
Revision     : (unknown)



Thanks for your help!

Nemir

_________________________________________________________________
Smart Saving with ING Direct – earn 5.25% p.a. variable rate:  
http://ad.au.doubleclick.net/clk;7249209;8842331;n?http://www.ingdirect.com.au/burst6offer.asp?id=8

con_ag.tgz
Description: Binary data