Re: gnokii-0.6.3

[BORBELY Zoltan]

Hi,

On Mon, Aug 02, 2004 at 03:52:34PM +0530, Goutam Saraswati wrote:
>  I have one MA8620E usb-to-serial cable based on pl2303 of Prolific 
> Technology.
> 
>  It works fine with Nokia 6100 using gnokii-0.6.3 on Windows XP.

It seems gnokii supports your phone.

>  But when I plug in the same pair of cable & phone to my Linux
> server(Fedora Core 1, kernel 2.4.22-1.2115.nptl), I am getting the
> message "Initialization Failed[11]......Telephone interface init failed".
> (gnokii 0.6.3, compiled from source)
> 
>  But the device is detected by the Operating System and "hwconf" shows
> the driver as "pl2303". 
> 
>  The only thing that I had to do was issuing the commands "insmod
> usbserial vendor=0x067b product=0x2303" and "insmod pl2303".
> 
>  On both the occasions the settings were "connection = serial" and
> "model = AT".
> 
>  While in Windows XP the setting was "device = COM8", in Linux,it was
> "device = /dev/ttyUSB0". I also tried with "device = /dev/usb/ttyUSB0"
> setting.

Please show us the relevant part of the dmesg output and turn on
debugging.

Bye,
Bozo