Re: gnokii-0.6.3

[Goutam Saraswati]

Mr. Zoltan

The outputs of what you have asked for and what you have not are all there in 
the zipped folder. The 'gnokii --identify' command was run with 'port = 
/dev/ttyUSB0'. The result is same with the setting 'port = /dev/usb/ttyUSB0'

Goutam Saraswati
---------- Original Message ----------------------------------
From: BORBELY Zoltan <address@hidden>
Date:  Mon, 2 Aug 2004 13:39:56 +0200

>Hi,
>
>On Mon, Aug 02, 2004 at 03:52:34PM +0530, Goutam Saraswati wrote:
>>  I have one MA8620E usb-to-serial cable based on pl2303 of Prolific 
>> Technology.
>> 
>>  It works fine with Nokia 6100 using gnokii-0.6.3 on Windows XP.
>
>It seems gnokii supports your phone.
>
>>  But when I plug in the same pair of cable & phone to my Linux
>> server(Fedora Core 1, kernel 2.4.22-1.2115.nptl), I am getting the
>> message "Initialization Failed[11]......Telephone interface init failed".
>> (gnokii 0.6.3, compiled from source)
>> 
>>  But the device is detected by the Operating System and "hwconf" shows
>> the driver as "pl2303". 
>> 
>>  The only thing that I had to do was issuing the commands "insmod
>> usbserial vendor=0x067b product=0x2303" and "insmod pl2303".
>> 
>>  On both the occasions the settings were "connection = serial" and
>> "model = AT".
>> 
>>  While in Windows XP the setting was "device = COM8", in Linux,it was
>> "device = /dev/ttyUSB0". I also tried with "device = /dev/usb/ttyUSB0"
>> setting.
>
>Please show us the relevant part of the dmesg output and turn on
>debugging.
>
>Bye,
>Bozo
>---
>[This E-mail scanned for viruses by Declude Anti-Virus Tool1]
>
>---
>[This E-mail scanned for viruses by Declude Anti-Virus Tool]
>
>

gnokii-linux.zip
Description: Binary data