Re: FBUS-frame question?

[Florin Vancea]

re: starting: Yes, it works for starting. Actually all I need is that the
phone is connected to the system.
If no frame gets answered after a long-enough timeout, I connect the charger
(yes, it's software-controlled) and the phone "wakes-up" for datatalk. Then
I "press" power button using frames and it's up.

It works because as long as the charger is connected the phone is accepting
frames on the data link regardless if its "user-visible" state is on or off.

re: btw: The software I'm using for the embedded box is already far from the
original PC version. In the good old times I used my good old 486 laptop
(each one with its pet :) ) but now I cannot reproduce my problem here and I
have to rely on logs captured at a remote site. And it fails only after a
day or two. Figure it out....

re: help: Thanks for trying to help. I'm looking forward to some reply.

----- Original Message ----- 
From: "docydoc" <address@hidden>
To: "Discussion forum for gnokii users." <address@hidden>
Sent: Tuesday, January 18, 2005 10:40 AM
Subject: Re: FBUS-frame question?


> Hi Florin!
>
> I used it to switchit off also. That worked like a charm (until the mobile
> accepts the
> key press frame (some don't).
> But more interesting would be: how to switchit on?
> Does it also work for you?
>
> For your calling problem I'll look into my source soon to check. I did
make call
> and release call
> already tru FBUS like the PCLocals Software of Nokia itself does (sniffed
it out
> with PortMon).
>
> btw: I also programm in an embedded solution but for testing I hooked up
my good
> old Amiga
> to trial and error out all I need quiiiiickly :)
>
>
> Florin Vancea wrote:
>
> > I am "pressing" the power button for a longer time, using
> > keyboard-controlling frames. It works on 5110/6110, may work on others,
too.
> >
> > ----- Original Message -----
> > From: "docydoc" <address@hidden>
> > To: "Gnokii User" <address@hidden>
> > Sent: Saturday, January 15, 2005 1:56 PM
> > Subject: FBUS-frame question?
> >
> > > Can someone tell me what is the correct FBUS-frame to be sent
> > > to a switched off mobile to ignite it? In my case it's a 6150.
> > > Is there another way to enter PIN except "keypress frames" sending
> > > as it does not work on all types of mobiles.
> > >
> > > Thanks
> > >
> > > Pierre
> > >
> > >
> > >
> > > _______________________________________________
> > > gnokii-users mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/gnokii-users
> > >
> > >
> >
> > _______________________________________________
> > gnokii-users mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/gnokii-users
>
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>
>