Re: Nokia 6680 doesn't connect via bluetooth with gnokii 0.6.14 (0.6.12 works)

[gblist]

> What about gnokii 0.6.13? Could you provide gnokiirc? Is it
> Symbian phone or NokiaOS? Debug output would also be useful.

Using sources, 0.6.12 works while 13 and 14 hang in just the same 
way. See debug output below.

address@hidden ~ $ gnokii --identify
GNOKII Version 0.6.12
LOG: debug mask is 0x1
phone instance config:
model: series60
port_device: whatever
connection_type: 5
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 14
sm_retry: off
Serial device: opening device whatever
Message sent: 0x01 / 0x0002
00 01                                           |
Message received: 0x05 / 0x0064
00 02 00 00 00 2f 00 73 00 77 00 20 00 76 00 65 |      / s w   v e
00 72 00 73 00 69 00 6f 00 6e 00 3a 00 0a 00 56 |  r s i o n :   V
00 20 00 35 00 2e 00 30 00 34 00 2e 00 30 00 37 |    5 . 0 4 . 0 7
00 0a 00 31 00 35 00 2d 00 30 00 32 00 2d 00 30 |    1 5 - 0 2 - 0
00 36 00 0a 00 52 00 4d 00 2d 00 33 00 36 00 0a |  6   R M - 3 6
00 28 00 63 00 29 00 20 00 4e 00 4f 00 4b 00 49 |  ( c )   N O K I
00 41 00 2e                                     |  A .
Received message type 05
PHONE: sw version:
V 5.04.07
15-02-06
RM-36
(c) NOKIA.
Unsolicited frame, skipping...
Message received: 0x01 / 0x0058
00 02 00 00 00 00 00 12 00 05 00 4e 00 4f 00 4b |            N O K
00 49 00 41 00 05 00 52 00 4d 00 2d 00 33 00 36 |  I A   R M - 3 6
00 0f 00 33 00 35 00 35 00 36 00 36 00 31 00 30 |    3 5 5 6 6 1 0
00 30 00 30 00 36 00 37 00 35 00 39 00 35 00 39 |  0 0 6 7 5 9 5 9
00 07 00 35 00 2e 00 30 00 34 00 2e 00 30 00 37 |    5 . 0 4 . 0 7
00 03 00 32 00 35 00 36                         |    2 5 6
Received message type 01
IMEI         : see above :-)
Manufacturer : NOKIA
Model        : RM-36
Revision     : SW 5.04.07, HW 256
Serial device: closing device

address@hidden ~ $ gnokii --identify
GNOKII Version 0.6.13
LOG: debug mask is 0x1
phone instance config:
model: series60
port_device: whatever
connection_type: 5
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 14
sm_retry: off
Connecting
Serial device: opening device whatever
[hangs forever]

Ciao,
Giovanni