gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Nokia 6210 Stopped Working


From: David Masterson
Subject: Nokia 6210 Stopped Working
Date: Tue, 13 Oct 2009 16:55:36 +0100

Hi guys,

I have an issue with a Nokia 6210 attached to a RHEL4 server. We use this to
send SMS messages from a nagios using gnokii 0.6.19 - this all worked fine
for many years until sometime over the last week when it decided to stop working.
I went into the comms room and noticed the serial cable was slightly out of the
phone socket, as if someone had snagged it and pulled it slightly out by mistake.

I have power cycled the phone, and rebooted the server, both to no avail - the phone
doesn't seem to respond to gnokii any more....

Heres what i see now, with debug enabled:

===================================================
address@hidden ~]# gnokii --identify
GNOKII Version 0.6.19
LOG: debug mask is 0x1
Config read from file /etc/gnokiirc.
phone instance config:
model: 6210
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: on
Connecting
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
Serial device: closing device
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
Serial device: closing device
Serial device: opening device /dev/ttyS0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2         
Serial device: closing device
Telephone interface init failed: Command timed out.
Quitting.
Cannot unlock device.
Command timed out.
=======================================================

My config is:

=======================================================
address@hidden ~]# cat /etc/gnokiirc
# This is a sample ~/.gnokiirc file.  Copy it into your
# home directory and name it .gnokiirc.
#

[global]
port = /dev/ttyS0
model = 6210
sm_retry = 1
#initlength = default
connection = serial
#use_locking = yes
#serial_baudrate = 19200
#smsc_timeout = 10

[gnokiid]
bindir = /usr/local/sbin/

[connect_script]

[disconnect_script]

[logging]
debug = on
rlpdebug = off
xdebug = off
=======================================================

Any ideas on what i can try to resurrect this? I am searching for a replacement
phone but 6210's are hard to come by....

Dave
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Picasa:      http://picasaweb.google.com/david.masterson/

* DeviantArt: http://ravydavygravy.deviantart.com/        
* Caving:      http://www.ucdcaving.com/                  
* LinkedIn:    http://www.linkedin.com/in/davema  
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

reply via email to

[Prev in Thread] Current Thread [Next in Thread]