|
From: | David Masterson |
Subject: | Re: Nokia 6210 Stopped Working |
Date: | Wed, 14 Oct 2009 10:29:48 +0100 |
Hi Dave
Have you tried stopping the Nagios stuff for a while, so it doesn't
access the port, and then use minicom or similar pointed at the serial
port at the correct speed?
Type an AT [return] and I'd expect the phone to respond. If it does, try
model=at and see if Gnokii responds.
If it doesn't respond, you may want to check that serial port. If you
loop pins 2 and 3, and type in minicom, you should get it echoed back.
I'm using a 6210 myself, and I think I'm using AT with it. There's some
about on Ebay, but they are not cheap :-(.
Chris
This e-mail may contain confidential and/or privileged information. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s), you must not use, distribute, copy or take any action in reliance on it, since to do so is strictly prohibited and may be unlawful. If you have received this e-mail in error, please return it to the sender immediately and delete it from your system. E-mail messages are not secure and attachments may contain software viruses which may damage your system. Whilst we have taken every reasonable precaution to minimise this risk, we cannot accept any liability for any damage which you sustain as a result of these factors. You are advised to carry out your own virus checks before opening any attachment. Any views or opinions expressed in this e-mail are solely those of the author and do not represent those of the NASUWT unless otherwise stated.
[Prev in Thread] | Current Thread | [Next in Thread] |