[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up
From: |
Eric S. Raymond |
Subject: |
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up |
Date: |
Fri, 20 May 2016 11:04:19 -0400 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
Clark B. Wierda <address@hidden>:
> I will try to get a cycle of these this weekend.
>
> I have BBB, ODroid-C2, RPi 3B, RPi 2B, and RPi 1B.
>
> I have the Adafruit Hat kit ready to build, a ublox-7, and a GR-601W.
>
> I can send in the fudges for all the above after verification in the RPi
> environment.
Thast would be useful.
> Aside:
> I was reading the requirements for the NTP Pool Project and they have very
> soft precision targets (>100ms). I was thinking that just about any USB GPS
> puck should be able to deliver this. This would simplify the process for
> many users.
That's weird. Why would they have a precision requirement *above*
RFC5905's "A few tens of milliseconds"? You'd think they'd want it
to be below that.
--
<a href="http://www.catb.org/~esr/">Eric S. Raymond</a>
- [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Eric S. Raymond, 2016/05/20
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Frank Nicholas, 2016/05/20
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Eric S. Raymond, 2016/05/20
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Clark B. Wierda, 2016/05/20
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up,
Eric S. Raymond <=
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Hal Murray, 2016/05/20
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Eric S. Raymond, 2016/05/21
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Hal Murray, 2016/05/21
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Eric S. Raymond, 2016/05/21
- Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Gary E. Miller, 2016/05/20
Re: [gpsd-dev] Draft Stratum 1 Microserver HOWTO is up, Frank Nicholas, 2016/05/20