[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Groff] groff -mm output something I don't expect
From: |
walter harms |
Subject: |
Re: [Groff] groff -mm output something I don't expect |
Date: |
Fri, 14 Nov 2008 16:17:48 +0100 |
User-agent: |
Thunderbird 2.0.0.16 (X11/20080720) |
(Ted Harding) schrieb:
> On 14-Nov-08 12:03:58, Mike Bianchi wrote:
>> On Fri, Nov 14, 2008 at 08:58:50AM +0100, Werner LEMBERG wrote:
>>>> I ``troff'' a simple file, hello.mm whose content is:
>>>>
>>>> .\" hello.mm
>>>> Hello World!
>>>>
>>>> with the command line:
>>>>
>>>> $ /usr/local/bin/groff -mm hello.mm > hello.ps
>>>>
>>>> and opened it with ``evince'', then I found there are two short bars
>>>> in topleft and topright corners of the page.
>>> This must be a problem with evince then. Here is the PS output of
>>> your document (omitting the preamble) as processed with the current
>>> CVS version of groff (and I doubt that this has changed recently):
>>>
>>> /F0 10/address@hidden SF
>>> 2.5(-1-)277.006 48 S
>>> (Hello W)69.336 96 Q
>>> (orld!) -.8 E
>>> 0 Cg
>>> EP
>>>
>>> As you can see, no bars are created. Maybe those bars indicate the
>>> left and right side of the paper, similar to the flashing lines in gv?
>> Is it possible the "two short bars" are the - 1 - (meaning page 1)
>> that
>> mm places as the Page Header?
>> --
>> Mike Bianchi
>
> I also tested the example. When I viewed 'hello.ps' with 'gv' [but
> see below], there was nothing wrong with the PS, and the top margin
> duly contained the page number "-1-".
>
> However, I then viewed with 'evince', and could not see the "-1-":
> it was as though the top margin had been cropped.
>
> I have had other bad experiences with 'evince' and now avoid using
> it altogether. In my Debian/gnome installation, /usr/bin/gv does
> not always work properly either, so I set up a symbolic link
>
> /usr/bin/GV -> /usr/bin/gnome-gv
> which in turn -> /usr/bin/ggv
>
> which seems to work fine. So in fact what I originally viewed the
> file 'hello.ps' I used GV!
>
i tried to file also and i thing it is a evince problem.
the -1- is clearly visible with ghostscript (gs) but not shown
with evince.
now the important question:
did someone report this to the evince people ?
re,
wh
GNOME evince 2.22.1.1
gs 8.62
groff 1.18.1