help-cfengine
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problems compiling 2.0a15 on IRIX 6.5.13


From: Rune Mossige
Subject: Re: Problems compiling 2.0a15 on IRIX 6.5.13
Date: Fri, 7 Dec 2001 08:40:15 +0100
User-agent: Mutt/1.2.5i

Thanks for the tip. I was not fully aware of this environment variable.

On (06/12/01 17:25), Bas van der Vlies wrote:
> X-Mailer: XFMail 1.4.4 on Solaris
> X-Priority: 3 (Normal)
> Content-Transfer-Encoding: 8bit
> Date: Thu, 06 Dec 2001 17:25:11 +0100 (MET)
> Reply-To: address@hidden
> Organization: SARA
> Sender: address@hidden
> From: Bas van der Vlies <address@hidden>
> To: Rune Mossige <address@hidden>
> Subject: Re: Problems compiling 2.0a15 on IRIX 6.5.13
> Cc: address@hidden
> 
> Rune,
> 
>  export LD_LIBRARYN32_PATH=$LD_LIBRARYN32_PATH:/usr/freeware/lib32
>  ./cfagent -n -p -v
> 
>  This is the solution not the one you provide, put it /etc/profile
>  and other line in /etc/cshrc and most programs will run.
> 
>                 Regards
> 
> On 06-Dec-2001 Rune Mossige wrote:
> > Thanks for the help.
> > 
> > I downloaded the file, and tried to run it:
> > 
> > ./cfagent -v
> > 37301:./cfagent: rld: Fatal Error: Cannot Successfully map soname
> > 'libdb-3.3.so' under any of the filenames
> > /usr/lib32/libdb-3.3.so:/usr/lib32/internal/libdb-3.3.so:/lib32/libdb-3.3.so:/
> > opt/lib32/libdb-3.3.so: 
> > 
> > 
> > I then created symlinks into /usr/lib pointint to where I installed
> > the DB3 (/usr/freeware/lib32), and then it ran OK. I will give it a go,
> > and see how it go.
> > 
> > Again, thanks for the help.
> > 
> > On (06/12/01 14:21), Bas van der Vlies wrote:
> >> X-Mailer: XFMail 1.4.4 on Solaris
> >> X-Priority: 3 (Normal)
> >> Content-Transfer-Encoding: 8bit
> >> Date: Thu, 06 Dec 2001 14:21:01 +0100 (MET)
> >> Reply-To: address@hidden
> >> Organization: SARA
> >> Sender: address@hidden
> >> From: Bas van der Vlies <address@hidden>
> >> To: Rune Mossige <address@hidden>
> >> Subject: RE: Problems compiling 2.0a15 on IRIX 6.5.13
> >> Cc: address@hidden
> >> 
> >> Rune,
> >>  
> >>  I have just compiled this version with gcc 2.95 no problems, but 
> >>  gethostbyname still goes wrong. I have also compiled it with
> >>  the native SGI compiler and also no problem. You can fetch it
> >>  from:
> >>    ftp.sara.nl://pub/SARA/outgoing/cfengine-irix-2.0a15.tar.gz
> >> 
> >>  NO Warranties and it is compiled on 6.5.13!!
> >> 
> >>                 Regards
> >> 
> >> On 06-Dec-2001 Rune Mossige wrote:
> >> > Hello,
> >> > I have soem O2's and Octanes running IRIX 6.5.13, and I would like
> >> > to compile cfengine-2.0a15 on those machines.
> >> > 
> >> > I have installed gcc 3.0 on them.
> >> > 
> >> > In the past (cfengine 1.6.3) I know that gcc did not work on IRIX,
> >> > because gethostbyname (I think) returned the wrong thing (I think
> >> > it was localhost). Is this fixed in gcc3?
> >> > 
> >> > Anyway, when I try to compile on an O2, I get:
> >> > 
> >> > 
> >> > GSTESW 14# make
> >> > Making all in pub
> >> >         source='getopt.c' object='getopt.o' libtool=no \
> >> >         depfile='.deps/getopt.Po' tmpdepfile='.deps/getopt.TPo' \
> >> >         depmode=gcc3 /bin/sh ../depcomp \
> >> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
> >> > getopt.c || echo './'`getopt.c
> >> >         source='getopt1.c' object='getopt1.o' libtool=no \
> >> >         depfile='.deps/getopt1.Po' tmpdepfile='.deps/getopt1.TPo' \
> >> >         depmode=gcc3 /bin/sh ../depcomp \
> >> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
> >> > getopt1.c || echo './'`getopt1.c
> >> >         source='full-write.c' object='full-write.o' libtool=no \
> >> >         depfile='.deps/full-write.Po' tmpdepfile='.deps/full-write.TPo' \
> >> >         depmode=gcc3 /bin/sh ../depcomp \
> >> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
> >> > full-write.c || echo './'`full-write.c
> >> >         source='regex.c' object='regex.o' libtool=no \
> >> >         depfile='.deps/regex.Po' tmpdepfile='.deps/regex.TPo' \
> >> >         depmode=gcc3 /bin/sh ../depcomp \
> >> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
> >> > regex.c || echo './'`regex.c
> >> >         source='md5.c' object='md5.o' libtool=no \
> >> >         depfile='.deps/md5.Po' tmpdepfile='.deps/md5.TPo' \
> >> >         depmode=gcc3 /bin/sh ../depcomp \
> >> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
> >> >         md5.c
> >> >|| echo './'`md5.c
> >> >         source='md5c.c' object='md5c.o' libtool=no \
> >> >         depfile='.deps/md5c.Po' tmpdepfile='.deps/md5c.TPo' \
> >> >         depmode=gcc3 /bin/sh ../depcomp \
> >> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
> >> > md5c.c || echo './'`md5c.c
> >> >         source='snprintf.c' object='snprintf.o' libtool=no \
> >> >         depfile='.deps/snprintf.Po' tmpdepfile='.deps/snprintf.TPo' \
> >> >         depmode=gcc3 /bin/sh ../depcomp \
> >> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
> >> > snprintf.c || echo './'`snprintf.c
> >> > snprintf.c: In function `vsnprintf':
> >> > snprintf.c:622: parse error before "int"
> >> > snprintf.c:622: parse error before "int"
> >> > snprintf.c:622: parse error before "int"
> >> > snprintf.c:622: parse error before "int"
> >> > snprintf.c:622: parse error before "int"
> >> > snprintf.c:622: parse error before ')' token
> >> > snprintf.c:636: parse error before "int"
> >> > snprintf.c:636: parse error before "int"
> >> > snprintf.c:636: parse error before "int"
> >> > snprintf.c:636: parse error before "int"
> >> > snprintf.c:636: parse error before "int"
> >> > snprintf.c:636: parse error before ')' token
> >> > snprintf.c:694: parse error before "int"
> >> > snprintf.c:694: parse error before "int"
> >> > snprintf.c:694: parse error before "int"
> >> > snprintf.c:694: parse error before "int"
> >> > snprintf.c:694: parse error before "int"
> >> > snprintf.c:694: parse error before ')' token
> >> > snprintf.c:700: parse error before "const"
> >> > snprintf.c:700: parse error before "const"
> >> > snprintf.c:700: parse error before "const"
> >> > snprintf.c:700: parse error before "const"
> >> > snprintf.c:700: parse error before "const"
> >> > snprintf.c:700: parse error before ')' token
> >> > snprintf.c:759: parse error before "void"
> >> > snprintf.c:759: parse error before "void"
> >> > snprintf.c:759: parse error before "void"
> >> > snprintf.c:759: parse error before "void"
> >> > snprintf.c:759: parse error before "void"
> >> > snprintf.c:759: parse error before ')' token
> >> > snprintf.c:770: parse error before "int"
> >> > snprintf.c:770: parse error before "int"
> >> > snprintf.c:770: parse error before "int"
> >> > snprintf.c:770: parse error before "int"
> >> > snprintf.c:770: parse error before "int"
> >> > snprintf.c:770: parse error before ')' token
> >> > snprintf.c:775: parse error before "long"
> >> > snprintf.c:775: parse error before "long"
> >> > snprintf.c:775: parse error before "long"
> >> > snprintf.c:775: parse error before "long"
> >> > snprintf.c:775: parse error before "long"
> >> > snprintf.c:775: parse error before ')' token
> >> > snprintf.c:791: parse error before "unsigned"
> >> > snprintf.c:791: parse error before "unsigned"
> >> > snprintf.c:791: parse error before "unsigned"
> >> > snprintf.c:791: parse error before "unsigned"
> >> > snprintf.c:791: parse error before "unsigned"
> >> > snprintf.c:791: parse error before ')' token
> >> > snprintf.c:795: parse error before "unsigned"
> >> > snprintf.c:795: parse error before "unsigned"
> >> > snprintf.c:795: parse error before "unsigned"
> >> > snprintf.c:795: parse error before "unsigned"
> >> > snprintf.c:795: parse error before "unsigned"
> >> > snprintf.c:795: parse error before ')' token
> >> > *** Error code 1 (bu21)
> >> > *** Error code 1 (bu21)
> >> > GSTESW 15# 
> >> > 
> >> > 
> >> > Is there anyone who knows how to fix this, or alternatively,
> >> > have a pre-compiled cfengine-2.0a15 binary distribution for
> >> > IRIX 6.5.13? I do not have the SGI compiler, so I am a bit lost...
> >> > -- 
> >> > -------------------------------------------------------------------
> >> >            (-: Hiroshima 45, Chernobyl 86, Windows 95 :-)
> >> > Our ultimate goal is to make overloaded systems appear to be idle.
> >> > High performance, High reliability, Low cost -------- Pick any two.
> >> > -------------------------------------------------------------------
> >> > Rune  Mossige,  Systems  Support  Engineer,  WesternGeco, Stavanger
> >> > Tel: (+47)51946869                             Mobile:(+47)90871024
> >> > 
> >> > _______________________________________________
> >> > Help-cfengine mailing list
> >> > address@hidden
> >> > http://mail.gnu.org/mailman/listinfo/help-cfengine
> >> 
> >> --
> >> ********************************************************************
> >> *                                                                  *
> >> *  Bas van der Vlies                     e-mail: address@hidden      *
> >> *  SARA - Academic Computing Services    phone:  +31 20 592 8012   *
> >> *  Kruislaan 415                         fax:    +31 20 6683167    *
> >> *  1098 SJ Amsterdam                     WWW:    www.sara.nl       *
> >> *                                                                  *
> >> ********************************************************************
> >> 
> > 
> > -- 
> > -------------------------------------------------------------------
> >            (-: Hiroshima 45, Chernobyl 86, Windows 95 :-)
> > Our ultimate goal is to make overloaded systems appear to be idle.
> > High performance, High reliability, Low cost -------- Pick any two.
> > -------------------------------------------------------------------
> > Rune  Mossige,  Systems  Support  Engineer,  WesternGeco, Stavanger
> > Tel: (+47)51946869                             Mobile:(+47)90871024
> > 
> > _______________________________________________
> > Help-cfengine mailing list
> > address@hidden
> > http://mail.gnu.org/mailman/listinfo/help-cfengine
> 
> --
> ********************************************************************
> *                                                                  *
> *  Bas van der Vlies                     e-mail: address@hidden      *
> *  SARA - Academic Computing Services    phone:  +31 20 592 8012   *
> *  Kruislaan 415                         fax:    +31 20 6683167    *
> *  1098 SJ Amsterdam                     WWW:    www.sara.nl       *
> *                                                                  *
> ********************************************************************
> 

-- 
-------------------------------------------------------------------
           (-: Hiroshima 45, Chernobyl 86, Windows 95 :-)
Our ultimate goal is to make overloaded systems appear to be idle.
High performance, High reliability, Low cost -------- Pick any two.
-------------------------------------------------------------------
Rune  Mossige,  Systems  Support  Engineer,  WesternGeco, Stavanger
Tel: (+47)51946869                             Mobile:(+47)90871024



reply via email to

[Prev in Thread] Current Thread [Next in Thread]