Re: Latest Development Version - @image with @value

[Christopher Dimech]

> Sent: Friday, December 04, 2020 at 10:17 PM
> From: "Patrice Dumas" <pertusus@free.fr>
> To: "Christopher Dimech" <dimech@gmx.com>
> Cc: "Gavin Smith" <gavinsmith0123@gmail.com>, "help-texinfo gnu" 
> <help-texinfo@gnu.org>
> Subject: Re: Latest Development Version - @image with @value
>
> On Fri, Dec 04, 2020 at 07:14:42PM +0100, Christopher Dimech wrote:
> > I done the whole thing again, however the version is still showing
> >
> > Loading texinfo [version 2020-10-24.12]
> >
> > hagbard@fuckup:
> > + ~/01cuneus/tdr/03ch
> > ls -lrt /usr/local/bin/texi2pdf
> > -rwxr-xr-x 1 root root 1246 Dec  4 19:09 /usr/local/bin/texi2pdf
> >
> > hagbard@fuckup:
> > + ~/01cuneus/tdr/03ch
> > ls -lrt
> > -rw-rw-r-- 1 hagbard hagbard 380722 Dec  4 18:03 texinfo.tex
>
> You can look at the beginning of the file to check that it is indeed
> the latest one.  If it is not used, it would be very strange.

I see texinfo.tex is saying
\def\texinfoversion{2020-10-24.12}

> An alternative possibility, but I doubt it a bit is if you have a non
> standard paths setting for TeX.
>
> I think that you can check your path with
>
> kpsewhich -show-path=tex

hagbard@fuckup:
+ ~/01cuneus/tdr/03ch
kpsewhich -show-path=tex
.:/home/hagbard/.texmf-config/tex/kpsewhich//:/home/hagbard/.texmf-var/tex/kpsewhich//:/home/hagbard/texmf/tex/kpsewhich//:/etc/texmf/tex/kpsewhich//:!!/var/lib/texmf/tex/kpsewhich//:!!/usr/local/share/texmf/tex/kpsewhich//:!!/usr/share/texmf/tex/kpsewhich//:!!/usr/share/texlive/texmf-dist/tex/kpsewhich//:/home/hagbard/.texmf-config/tex/generic//:/home/hagbard/.texmf-var/tex/generic//:/home/hagbard/texmf/tex/generic//:/etc/texmf/tex/generic//:!!/var/lib/texmf/tex/generic//:!!/usr/local/share/texmf/tex/generic//:!!/usr/share/texmf/tex/generic//:!!/usr/share/texlive/texmf-dist/tex/generic//:/home/hagbard/.texmf-config/tex///:/home/hagbard/.texmf-var/tex///:/home/hagbard/texmf/tex///:/etc/texmf/tex///:!!/var/lib/texmf/tex///:!!/usr/local/share/texmf/tex///:!!/usr/share/texmf/tex///:!!/usr/share/texlive/texmf-dist/tex///


> or
>
> kpsewhich --expand-var='$TEXINPUTS'


hagbard@fuckup:
+ ~/01cuneus/tdr/03ch
kpsewhich --expand-var='$TEXINPUTS'
.:{/home/hagbard/.texmf-config,/home/hagbard/.texmf-var,/home/hagbard/texmf,/etc/texmf,!!/var/lib/texmf,!!/usr/local/share/texmf,!!/usr/share/texmf,!!/usr/share/texlive/texmf-dist}/tex/{kpsewhich,generic,}//


>
> >
> >
> >
> > > Sent: Friday, December 04, 2020 at 6:28 PM
> > > From: "Gavin Smith" <gavinsmith0123@gmail.com>
> > > To: "Christopher Dimech" <dimech@gmx.com>
> > > Cc: "help-texinfo gnu" <help-texinfo@gnu.org>
> > > Subject: Re: Latest Development Version - @image with @value
> > >
> > > You have to copy texinfo.tex manually to where it will be used.
> > > Running "make install" is not enough.
> > >
> > > On Fri, Dec 4, 2020 at 5:13 PM Christopher Dimech <dimech@gmx.com> wrote:
> > > >
> > > > Have just re-downloaded the file and put in the directory 
> > > > ~/01cuneus/tdr/03ch
> > > > (where the file resides) from where I run texi2pdf 03aCh-Chmed-html.texi
> > > >
> > > > To install the new version I ran gendocs.sh, then the usual configure 
> > > > etc.
> > > >
> > > > I can see that the programs were updated in  /usr/local/bin/
> > > >
> > > > Problem remains
> > > > C*
> > > >
> > > > > Sent: Friday, December 04, 2020 at 5:45 PM
> > > > > From: "Gavin Smith" <gavinsmith0123@gmail.com>
> > > > > To: "Christopher Dimech" <dimech@gmx.com>
> > > > > Cc: "help-texinfo gnu" <help-texinfo@gnu.org>
> > > > > Subject: Re: Latest Development Version - @image with @value
> > > > >
> > > > > On Thu, Dec 03, 2020 at 08:03:19PM +0100, Christopher Dimech wrote:
> > > > > > Using the following does not work for me.  Do I require some setup? 
> > > > > >  Have
> > > > > > also got the latest texinfo.tex
> > > > > >
> > > > > > @set igmpath /home/hagbard/01cuneus/tdr/ideogr/03bCh-Chmed
> > > > > > @image{/home/hagbard/01cuneus/tdr/ideogr/03bCh-Chmed/igc03-01-Sicl-CircAmRg,,,,.png}
> > > > > > @image{@value{igmpath}/igc03-01-Sicl-CircAmRg,,,,.png}
> > > > > >
> > > > > > First call to @image works, the second fails.
> > > > >
> > > > > Well, I tried @image with @value with an absolute directory
> > > > > name, and it worked.  What output are you getting from TeX?  Are you
> > > > > sure the latest texinfo.tex is being read?
> > > > >
> > > > >
> > >
> >
>