Hi Christopher,
Indeed there is no exhaustive list of all settings supported by the configuration file and thus the remote provisioning, but a quick grep in linphone source code over linphone_config_get will show you every supported setting by the SDK, and you can do the same in the application source code to see app specific config entries.
For your information I just merged in release/5.2 branch of linphone-sdk a fix for when no_rtp_timeout is set to 0.
Cheers,
Sylvain Berfini
Head of Mobile & Desktop Apps Department
+33 (0)9 52 63 65 05
sylvain.berfini@belledonne-communications.com
Discover our solutions in 3 minutes!
Belledonne Communications, the company behind the Linphone project
https://linphone.org
Le 05/06/2023 à 14:29, Christopher Story a écrit :
Ok checked my remote xml config and it is in fact zero there. I changed to 10 and it's working now. Been using the same remote config for a couple years now, first time it was an issue.
Are there comprehensive details on the remote config other than:
Assuming I can reverse engineer based on the #1234# config?
Thanks for the help
Chris
On Mon, Jun 5, 2023, 07:11 Christopher Story <ke6rwj@gmail.com> wrote:
It is zero. What's the best way to change it? I don't see a config item for it..
[rtp]accept_any_encryption=1audio_rtp_port=-1video_rtp_port=-1text_rtp_port=-1audio_jitt_comp=60video_jitt_comp=60nortp_timeout=0audio_adaptive_jitt_comp_enabled=1video_adaptive_jitt_comp_enabled=1
On Mon, Jun 5, 2023, 02:23 Sylvain Berfini <sylvain.berfini@belledonne-communications.com> wrote:
Hi Christopher,
Can you check the nortp_timeout value under [rtp] section in your config file please?
You can dial '#1234#' from the dialer and click on 'View config file' option.The default value is 30, but given your logs it seems it is very low (or even 0).
Can you confirm?Cheers,
Sylvain Berfini
Head of Mobile & Desktop Apps Department
+33 (0)9 52 63 65 05
sylvain.berfini@belledonne-communications.com
Discover our solutions in 3 minutes!
Belledonne Communications, the company behind the Linphone project
https://linphone.org
Le 02/06/2023 à 02:23, Christopher Story a écrit :
i'm using a freepbx system with a combination of desk phones, computer soft phones and android / IOS softphones.. all the softphones are linphone.
when i try to dial an internal extension, it instantly hangs up. This happens on Android regardless of inside our outside the NAT
its does not happen on MacOS or hard phones, from inside the NAT or Outside
in looking at the log the terminate seems to be issued from the phone and the only thing that it says is:
2023-06-01 18:07:32:721 [org.linphone/mediastreamer] MESSAGE Stun packet of length 20 sent on rtcp for session [0x70658a17f0]
2023-06-01 18:07:33:218 [org.linphone/liblinphone] MESSAGE Call [0x6fb5839cd0]: Media connectivity with @my.active.domain:25061 is lost, call is going to be terminated
2023-06-01 18:07:33:218 [org.linphone/liblinphone] WARNING Session [0x6f55848558] is going to be terminated because the media has been lost
2023-06-01 18:07:33:218 [org.linphone/liblinphone] MESSAGE Terminate CallSession [0x6f55848558] which is currently in state [LinphoneCallOutgoingEarlyMedia]
2023-06-01 18:07:33:218 [org.linphone/liblinphone] MESSAGE Cancelling INVITE request from ["CS" <sip:300@my.active.domain:25061>] to [@my.active.domain:25061]
I feel like the firewall and network stuff is solid since all the other phones, using the same infrastructure dont have any issues... Wondering if there are any known issues with android these days..
any way to increase logging?
-- Chris
_______________________________________________ Linphone-users mailing list Linphone-users@nongnu.org https://lists.nongnu.org/mailman/listinfo/linphone-users