Re: [Paparazzi-devel] Powering Lisa/M 2.0

[Dylan Brunello]

Hi Balazs,

Thanks for the suggestion. I thought that it might be safer to power the autopilot separately from the servos the minimise the noise from the supply.

Cheers,

Dylan

On Tue, May 6, 2014 at 12:27 AM, Balazs GATI <address@hidden> wrote:

Perhaps you can power both rail with the same BEC.

Regards,
 Balazs

2014.05.04. 1:28 keltezéssel, Dylan Brunello írta:

Thanks Piotr and Chris.

On Sunday, 4 May 2014, Chris <address@hidden

<mailto:address@hidden>> wrote:

    No problem at all if you don't parallel the output of 2 or more BECs.
    Sometimes linear BECs (switchmode never) can be paralleled but this
    is not a good practice in any case.
    In other words if you use more than one BEC in a split load
    configuration but make sure that their + rail is not paralleled.
    Chris

    On 05/03/2014 01:59 PM, Dylan Brunello wrote:

    Hello,

    I have a Lisa/M 2.0 configured with the default power jumpers. I'd
    like to power everything in the system from a single battery (3S
    LiPo). The plan is to power the servo rail using the 5V BEC on the
    ESC. Is it safe to connect an additional 5V BEC to the battery and
    use that to power the Lisa and peripherals? My concern is the two
    BECs on the one battery. Any thoughts regarding powering the
    system in this fashion?

    Cheers,
    Dylan


    _______________________________________________
    Paparazzi-devel mailing list

    address@hidden  <_javascript_:_e(%7B%7D,'cvml','address@hidden');>
    https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

--
Balazs GATI, PhD
associate professor
     Department of Aeronautics, Naval Architecture and Railway Vehicles
     Budapest University of Technology and Economics

Address:   Budapest
          Stoczek u 6. J. ép. 423
          1111
Tel:       +(36)-1-463-1960
Fax:       +(36)-1-463-3080
Homepage: http://vrht.bme.hu/

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel