Re: [Paparazzi-devel] Paparazzi run on STM32F4 Discovery board

[Chris Efstathiou]

you can use it for both types but basically i use it on a large airplane.
The main problem for using it in a quadcopter i believe is the size of the board.
Chris

On 12/21/2014 1:28 PM, kyaw khaing wrote:

Hi Chris,

       Thanks for your guidance . Sorry for my typo error of your name.I would like to ask you one thing is that is your way i sultable for quadcopter or plain.

With regards,

Kyaw Khaing

Sent from Samsung Mobile

-------- Original message --------

From: Chris Efstathiou

Date:20/12/2014 9:51 PM (GMT+08:00)

To: Paparazzi UAV devel list

Subject: Re: [Paparazzi-devel] Paparazzi run on STM32F4 Discovery board

Hi.
First of all i am not the Christ :-)
Discovery board works fine as a paparazzi autopilot.
For the wiring have a look at the "stm32f4_discovery.h" board header file located in paparazzi/sw/airborne/boards/
directory, where all the com, i2c, spi, analog, ppm input, servo etc. pins are assigned.
For the airframe configuration edit any stm32 based autopilot example airframe file but change the board type from
say
<target name="ap" board="lisa_m_2.0"/> 
to
<target name="ap" board="stm32f4_discovery"/>
(replace the bord name wirh whatever name the board header file has minus the extension ".h" )
Thats it!
Chris


On 12/20/2014 5:07 AM, kyaw khaing wrote:

Hi all,

       I want to run paparazzi on STM32F4 Discovery + 10dof imu. Anyone could guide me how it to be done. I have read one email under "Paparazzi-devel" , the person name "Christ" had already done this.But I don't find any instruction and guide for this.

With regards,

Kyaw Khaing

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel