qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machi


From: David Hildenbrand
Subject: Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code
Date: Tue, 26 May 2020 09:36:10 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.7.0

On 26.05.20 09:35, David Hildenbrand wrote:
> On 25.05.20 17:06, Philippe Mathieu-Daudé wrote:
>> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
>> ---
>>  qapi/machine.json          | 90 ++++++++++++++++++++++++++++++++++++++
>>  qapi/misc.json             | 90 --------------------------------------
>>  include/sysemu/balloon.h   |  2 +-
>>  balloon.c                  |  2 +-
>>  hw/virtio/virtio-balloon.c |  2 +-
>>  monitor/hmp-cmds.c         |  1 +
>>  6 files changed, 94 insertions(+), 93 deletions(-)
>>
>> diff --git a/qapi/machine.json b/qapi/machine.json
>> index ca7d58f0c9..ae42d69495 100644
>> --- a/qapi/machine.json
>> +++ b/qapi/machine.json
>> @@ -921,3 +921,93 @@
>>    'data': 'NumaOptions',
>>    'allow-preconfig': true
>>  }
>> +
>> +##
>> +# @balloon:
>> +#
>> +# Request the balloon driver to change its balloon size.
>> +#
>> +# @value: the target logical size of the VM in bytes
>> +#         We can deduce the size of the balloon using this formula:
>> +#            logical_vm_size = vm_ram_size - balloon_size
>> +#         From it we have: balloon_size = vm_ram_size - @value
>> +#
>> +# Returns: - Nothing on success
>> +#          - If the balloon driver is enabled but not functional because 
>> the KVM
>> +#            kernel module cannot support it, KvmMissingCap
>> +#          - If no balloon device is present, DeviceNotActive
>> +#
>> +# Notes: This command just issues a request to the guest.  When it returns,
>> +#        the balloon size may not have changed.  A guest can change the 
>> balloon
>> +#        size independent of this command.
>> +#
>> +# Since: 0.14.0
>> +#
>> +# Example:
>> +#
>> +# -> { "execute": "balloon", "arguments": { "value": 536870912 } }
>> +# <- { "return": {} }
>> +#
>> +# With a 2.5GiB guest this command inflated the ballon to 3GiB.
>> +#
>> +##
>> +{ 'command': 'balloon', 'data': {'value': 'int'} }
>> +
>> +##
>> +# @BalloonInfo:
>> +#
>> +# Information about the guest balloon device.
>> +#
>> +# @actual: the logical size of the VM in bytes
>> +#          Formula used: logical_vm_size = vm_ram_size - balloon_size
>> +#
>> +# Since: 0.14.0
>> +#
>> +##
>> +{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
>> +
>> +##
>> +# @query-balloon:
>> +#
>> +# Return information about the balloon device.
>> +#
>> +# Returns: - @BalloonInfo on success
>> +#          - If the balloon driver is enabled but not functional because 
>> the KVM
>> +#            kernel module cannot support it, KvmMissingCap
>> +#          - If no balloon device is present, DeviceNotActive
>> +#
>> +# Since: 0.14.0
>> +#
>> +# Example:
>> +#
>> +# -> { "execute": "query-balloon" }
>> +# <- { "return": {
>> +#          "actual": 1073741824,
>> +#       }
>> +#    }
>> +#
>> +##
>> +{ 'command': 'query-balloon', 'returns': 'BalloonInfo' }
>> +
>> +##
>> +# @BALLOON_CHANGE:
>> +#
>> +# Emitted when the guest changes the actual BALLOON level. This value is
>> +# equivalent to the @actual field return by the 'query-balloon' command
>> +#
>> +# @actual: the logical size of the VM in bytes
>> +#          Formula used: logical_vm_size = vm_ram_size - balloon_size
>> +#
>> +# Note: this event is rate-limited.
>> +#
>> +# Since: 1.2
>> +#
>> +# Example:
>> +#
>> +# <- { "event": "BALLOON_CHANGE",
>> +#      "data": { "actual": 944766976 },
>> +#      "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
>> +#
>> +##
>> +{ 'event': 'BALLOON_CHANGE',
>> +  'data': { 'actual': 'int' } }
>> diff --git a/qapi/misc.json b/qapi/misc.json
>> index 446fc8ff83..26b5115638 100644
>> --- a/qapi/misc.json
>> +++ b/qapi/misc.json
>> @@ -186,65 +186,6 @@
>>  { 'command': 'query-iothreads', 'returns': ['IOThreadInfo'],
>>    'allow-preconfig': true }
>>  
>> -##
>> -# @BalloonInfo:
>> -#
>> -# Information about the guest balloon device.
>> -#
>> -# @actual: the logical size of the VM in bytes
>> -#          Formula used: logical_vm_size = vm_ram_size - balloon_size
>> -#
>> -# Since: 0.14.0
>> -#
>> -##
>> -{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
>> -
>> -##
>> -# @query-balloon:
>> -#
>> -# Return information about the balloon device.
>> -#
>> -# Returns: - @BalloonInfo on success
>> -#          - If the balloon driver is enabled but not functional because 
>> the KVM
>> -#            kernel module cannot support it, KvmMissingCap
>> -#          - If no balloon device is present, DeviceNotActive
>> -#
>> -# Since: 0.14.0
>> -#
>> -# Example:
>> -#
>> -# -> { "execute": "query-balloon" }
>> -# <- { "return": {
>> -#          "actual": 1073741824,
>> -#       }
>> -#    }
>> -#
>> -##
>> -{ 'command': 'query-balloon', 'returns': 'BalloonInfo' }
>> -
>> -##
>> -# @BALLOON_CHANGE:
>> -#
>> -# Emitted when the guest changes the actual BALLOON level. This value is
>> -# equivalent to the @actual field return by the 'query-balloon' command
>> -#
>> -# @actual: the logical size of the VM in bytes
>> -#          Formula used: logical_vm_size = vm_ram_size - balloon_size
>> -#
>> -# Note: this event is rate-limited.
>> -#
>> -# Since: 1.2
>> -#
>> -# Example:
>> -#
>> -# <- { "event": "BALLOON_CHANGE",
>> -#      "data": { "actual": 944766976 },
>> -#      "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
>> -#
>> -##
>> -{ 'event': 'BALLOON_CHANGE',
>> -  'data': { 'actual': 'int' } }
>> -
>>  ##
>>  # @PciMemoryRange:
>>  #
>> @@ -753,37 +694,6 @@
>>  ##
>>  { 'command': 'inject-nmi' }
>>  
>> -##
>> -# @balloon:
>> -#
>> -# Request the balloon driver to change its balloon size.
>> -#
>> -# @value: the target logical size of the VM in bytes
>> -#         We can deduce the size of the balloon using this formula:
>> -#            logical_vm_size = vm_ram_size - balloon_size
>> -#         From it we have: balloon_size = vm_ram_size - @value
>> -#
>> -# Returns: - Nothing on success
>> -#          - If the balloon driver is enabled but not functional because 
>> the KVM
>> -#            kernel module cannot support it, KvmMissingCap
>> -#          - If no balloon device is present, DeviceNotActive
>> -#
>> -# Notes: This command just issues a request to the guest.  When it returns,
>> -#        the balloon size may not have changed.  A guest can change the 
>> balloon
>> -#        size independent of this command.
>> -#
>> -# Since: 0.14.0
>> -#
>> -# Example:
>> -#
>> -# -> { "execute": "balloon", "arguments": { "value": 536870912 } }
>> -# <- { "return": {} }
>> -#
>> -# With a 2.5GiB guest this command inflated the ballon to 3GiB.
>> -#
>> -##
>> -{ 'command': 'balloon', 'data': {'value': 'int'} }
>> -
>>  ##
>>  # @human-monitor-command:
>>  #
>> diff --git a/include/sysemu/balloon.h b/include/sysemu/balloon.h
>> index aea0c44985..b3de4b92b9 100644
>> --- a/include/sysemu/balloon.h
>> +++ b/include/sysemu/balloon.h
>> @@ -15,7 +15,7 @@
>>  #define QEMU_BALLOON_H
>>  
>>  #include "exec/cpu-common.h"
>> -#include "qapi/qapi-types-misc.h"
>> +#include "qapi/qapi-types-machine.h"
>>  
>>  typedef void (QEMUBalloonEvent)(void *opaque, ram_addr_t target);
>>  typedef void (QEMUBalloonStatus)(void *opaque, BalloonInfo *info);
>> diff --git a/balloon.c b/balloon.c
>> index f104b42961..ee9c59252d 100644
>> --- a/balloon.c
>> +++ b/balloon.c
>> @@ -30,7 +30,7 @@
>>  #include "sysemu/balloon.h"
>>  #include "trace-root.h"
>>  #include "qapi/error.h"
>> -#include "qapi/qapi-commands-misc.h"
>> +#include "qapi/qapi-commands-machine.h"
>>  #include "qapi/qmp/qerror.h"
>>  
>>  static QEMUBalloonEvent *balloon_event_fn;
>> diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
>> index 065cd450f1..ec3aac1e80 100644
>> --- a/hw/virtio/virtio-balloon.c
>> +++ b/hw/virtio/virtio-balloon.c
>> @@ -24,7 +24,7 @@
>>  #include "hw/virtio/virtio-balloon.h"
>>  #include "exec/address-spaces.h"
>>  #include "qapi/error.h"
>> -#include "qapi/qapi-events-misc.h"
>> +#include "qapi/qapi-events-machine.h"
>>  #include "qapi/visitor.h"
>>  #include "trace.h"
>>  #include "qemu/error-report.h"
>> diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
>> index 9c61e769ca..376590c073 100644
>> --- a/monitor/hmp-cmds.c
>> +++ b/monitor/hmp-cmds.c
>> @@ -32,6 +32,7 @@
>>  #include "qapi/qapi-commands-block.h"
>>  #include "qapi/qapi-commands-char.h"
>>  #include "qapi/qapi-commands-control.h"
>> +#include "qapi/qapi-commands-machine.h"
>>  #include "qapi/qapi-commands-migration.h"
>>  #include "qapi/qapi-commands-misc.h"
>>  #include "qapi/qapi-commands-net.h"
>>
> 
> Reviewed-by: David Hildenbrand <address@hidden>
> 
> I yet have to craft a patch to fixup the wrong documentation :)
> 

Oh, I see you already included a fixup, nice!

-- 
Thanks,

David / dhildenb




reply via email to

[Prev in Thread] Current Thread [Next in Thread]