[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 16/23] hw/sd: Rename sdbus_write_data() as sdbus_write_byte()
From: |
Philippe Mathieu-Daudé |
Subject: |
[PULL 16/23] hw/sd: Rename sdbus_write_data() as sdbus_write_byte() |
Date: |
Fri, 21 Aug 2020 19:29:09 +0200 |
The sdbus_write_data() method do a single byte access on the data
line of a SD bus. Rename it as sdbus_write_byte() and document it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-3-f4bug@amsat.org>
---
include/hw/sd/sd.h | 9 ++++++++-
hw/sd/allwinner-sdhost.c | 10 +++++-----
hw/sd/bcm2835_sdhost.c | 2 +-
hw/sd/core.c | 2 +-
hw/sd/milkymist-memcard.c | 8 ++++----
hw/sd/pl181.c | 2 +-
hw/sd/pxa2xx_mmci.c | 2 +-
hw/sd/sdhci.c | 8 ++++----
8 files changed, 25 insertions(+), 18 deletions(-)
diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h
index b58b5a19afe..1e5ac955d05 100644
--- a/include/hw/sd/sd.h
+++ b/include/hw/sd/sd.h
@@ -158,7 +158,14 @@ void sdbus_set_voltage(SDBus *sdbus, uint16_t millivolts);
uint8_t sdbus_get_dat_lines(SDBus *sdbus);
bool sdbus_get_cmd_line(SDBus *sdbus);
int sdbus_do_command(SDBus *sd, SDRequest *req, uint8_t *response);
-void sdbus_write_data(SDBus *sd, uint8_t value);
+/**
+ * Write a byte to a SD bus.
+ * @sd: bus
+ * @value: byte to write
+ *
+ * Write a byte on the data lines of a SD bus.
+ */
+void sdbus_write_byte(SDBus *sd, uint8_t value);
uint8_t sdbus_read_data(SDBus *sd);
bool sdbus_data_ready(SDBus *sd);
bool sdbus_get_inserted(SDBus *sd);
diff --git a/hw/sd/allwinner-sdhost.c b/hw/sd/allwinner-sdhost.c
index f404e1fdb45..e05e8a3864c 100644
--- a/hw/sd/allwinner-sdhost.c
+++ b/hw/sd/allwinner-sdhost.c
@@ -335,7 +335,7 @@ static uint32_t allwinner_sdhost_process_desc(AwSdHostState
*s,
buf, buf_bytes);
for (uint32_t i = 0; i < buf_bytes; i++) {
- sdbus_write_data(&s->sdbus, buf[i]);
+ sdbus_write_byte(&s->sdbus, buf[i]);
}
/* Read from SD bus */
@@ -654,10 +654,10 @@ static void allwinner_sdhost_write(void *opaque, hwaddr
offset,
s->startbit_detect = value;
break;
case REG_SD_FIFO: /* Read/Write FIFO */
- sdbus_write_data(&s->sdbus, value & 0xff);
- sdbus_write_data(&s->sdbus, (value >> 8) & 0xff);
- sdbus_write_data(&s->sdbus, (value >> 16) & 0xff);
- sdbus_write_data(&s->sdbus, (value >> 24) & 0xff);
+ sdbus_write_byte(&s->sdbus, value & 0xff);
+ sdbus_write_byte(&s->sdbus, (value >> 8) & 0xff);
+ sdbus_write_byte(&s->sdbus, (value >> 16) & 0xff);
+ sdbus_write_byte(&s->sdbus, (value >> 24) & 0xff);
allwinner_sdhost_update_transfer_cnt(s, sizeof(uint32_t));
allwinner_sdhost_auto_stop(s);
allwinner_sdhost_update_irq(s);
diff --git a/hw/sd/bcm2835_sdhost.c b/hw/sd/bcm2835_sdhost.c
index 4a80fbcc861..16aba7cc92b 100644
--- a/hw/sd/bcm2835_sdhost.c
+++ b/hw/sd/bcm2835_sdhost.c
@@ -223,7 +223,7 @@ static void bcm2835_sdhost_fifo_run(BCM2835SDHostState *s)
}
n--;
s->datacnt--;
- sdbus_write_data(&s->sdbus, value & 0xff);
+ sdbus_write_byte(&s->sdbus, value & 0xff);
value >>= 8;
}
}
diff --git a/hw/sd/core.c b/hw/sd/core.c
index 79d96576ead..13b5ca03169 100644
--- a/hw/sd/core.c
+++ b/hw/sd/core.c
@@ -102,7 +102,7 @@ int sdbus_do_command(SDBus *sdbus, SDRequest *req, uint8_t
*response)
return 0;
}
-void sdbus_write_data(SDBus *sdbus, uint8_t value)
+void sdbus_write_byte(SDBus *sdbus, uint8_t value)
{
SDState *card = get_card(sdbus);
diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c
index e9f5db5e22d..4128109c047 100644
--- a/hw/sd/milkymist-memcard.c
+++ b/hw/sd/milkymist-memcard.c
@@ -209,10 +209,10 @@ static void memcard_write(void *opaque, hwaddr addr,
uint64_t value,
if (!s->enabled) {
break;
}
- sdbus_write_data(&s->sdbus, (value >> 24) & 0xff);
- sdbus_write_data(&s->sdbus, (value >> 16) & 0xff);
- sdbus_write_data(&s->sdbus, (value >> 8) & 0xff);
- sdbus_write_data(&s->sdbus, value & 0xff);
+ sdbus_write_byte(&s->sdbus, (value >> 24) & 0xff);
+ sdbus_write_byte(&s->sdbus, (value >> 16) & 0xff);
+ sdbus_write_byte(&s->sdbus, (value >> 8) & 0xff);
+ sdbus_write_byte(&s->sdbus, value & 0xff);
break;
case R_ENABLE:
s->regs[addr] = value;
diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c
index 574500ce600..771bae193f5 100644
--- a/hw/sd/pl181.c
+++ b/hw/sd/pl181.c
@@ -244,7 +244,7 @@ static void pl181_fifo_run(PL181State *s)
}
n--;
s->datacnt--;
- sdbus_write_data(&s->sdbus, value & 0xff);
+ sdbus_write_byte(&s->sdbus, value & 0xff);
value >>= 8;
}
}
diff --git a/hw/sd/pxa2xx_mmci.c b/hw/sd/pxa2xx_mmci.c
index 2996a2ef177..07ddc2eba3e 100644
--- a/hw/sd/pxa2xx_mmci.c
+++ b/hw/sd/pxa2xx_mmci.c
@@ -184,7 +184,7 @@ static void pxa2xx_mmci_fifo_update(PXA2xxMMCIState *s)
if (s->cmdat & CMDAT_WR_RD) {
while (s->bytesleft && s->tx_len) {
- sdbus_write_data(&s->sdbus, s->tx_fifo[s->tx_start++]);
+ sdbus_write_byte(&s->sdbus, s->tx_fifo[s->tx_start++]);
s->tx_start &= 0x1f;
s->tx_len --;
s->bytesleft --;
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index deac1818650..4bf1ee88b2a 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -515,7 +515,7 @@ static void sdhci_write_block_to_card(SDHCIState *s)
}
for (index = 0; index < (s->blksize & BLOCK_SIZE_MASK); index++) {
- sdbus_write_data(&s->sdbus, s->fifo_buffer[index]);
+ sdbus_write_byte(&s->sdbus, s->fifo_buffer[index]);
}
/* Next data can be written through BUFFER DATORT register */
@@ -642,7 +642,7 @@ static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
s->sdmasysad += s->data_count - begin;
if (s->data_count == block_size) {
for (n = 0; n < block_size; n++) {
- sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
+ sdbus_write_byte(&s->sdbus, s->fifo_buffer[n]);
}
s->data_count = 0;
if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
@@ -679,7 +679,7 @@ static void sdhci_sdma_transfer_single_block(SDHCIState *s)
} else {
dma_memory_read(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt);
for (n = 0; n < datacnt; n++) {
- sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
+ sdbus_write_byte(&s->sdbus, s->fifo_buffer[n]);
}
}
s->blkcnt--;
@@ -815,7 +815,7 @@ static void sdhci_do_adma(SDHCIState *s)
dscr.addr += s->data_count - begin;
if (s->data_count == block_size) {
for (n = 0; n < block_size; n++) {
- sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
+ sdbus_write_byte(&s->sdbus, s->fifo_buffer[n]);
}
s->data_count = 0;
if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
--
2.26.2
- [PULL 06/23] hw/sd/pl181: Replace fprintf(stderr, "*\n") with error_report(), (continued)
- [PULL 06/23] hw/sd/pl181: Replace fprintf(stderr, "*\n") with error_report(), Philippe Mathieu-Daudé, 2020/08/21
- [PULL 07/23] hw/sd/pl181: Rename pl181_send_command() as pl181_do_command(), Philippe Mathieu-Daudé, 2020/08/21
- [PULL 08/23] hw/sd/pl181: Add TODO to use Fifo32 API, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 09/23] hw/sd/pl181: Use named GPIOs, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 10/23] hw/sd/pl181: Expose a SDBus and connect the SDCard to it, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 11/23] hw/sd/pl181: Do not create SD card within the SD host controller, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 12/23] hw/sd/pl181: Replace disabled fprintf()s by trace events, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 14/23] hw/sd: Move sdcard legacy API to 'hw/sd/sdcard_legacy.h', Philippe Mathieu-Daudé, 2020/08/21
- [PULL 13/23] hw/sd/sdcard: Make sd_data_ready() static, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 15/23] hw/sd: Rename read/write_data() as read/write_byte(), Philippe Mathieu-Daudé, 2020/08/21
- [PULL 16/23] hw/sd: Rename sdbus_write_data() as sdbus_write_byte(),
Philippe Mathieu-Daudé <=
- [PULL 18/23] hw/sd: Add sdbus_write_data() to write multiples bytes on the data line, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 20/23] hw/sd: Add sdbus_read_data() to read multiples bytes on the data line, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 17/23] hw/sd: Rename sdbus_read_data() as sdbus_read_byte(), Philippe Mathieu-Daudé, 2020/08/21
- [PULL 21/23] hw/sd: Use sdbus_read_data() instead of sdbus_read_byte() when possible, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 19/23] hw/sd: Use sdbus_write_data() instead of sdbus_write_byte when possible, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 23/23] hw/sd: Correct the maximum size of a Standard Capacity SD Memory Card, Philippe Mathieu-Daudé, 2020/08/21
- [PULL 22/23] hw/sd: Fix incorrect populated function switch status data structure, Philippe Mathieu-Daudé, 2020/08/21
- Re: [PULL 00/23] SD/MMC patches for 2020-08-21, Peter Maydell, 2020/08/23