[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 02/33] nseries: clean up coding style
|
From: |
Paolo Bonzini |
|
Subject: |
[Qemu-devel] [PULL 02/33] nseries: clean up coding style |
|
Date: |
Thu, 5 Jun 2014 16:21:52 +0200 |
Reviewed-by: Peter Maydell <address@hidden>
Signed-off-by: Paolo Bonzini <address@hidden>
---
hw/arm/nseries.c | 272 +++++++++++++++++++++++++++++--------------------------
1 file changed, 145 insertions(+), 127 deletions(-)
diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
index 82772c6..6174371 100644
--- a/hw/arm/nseries.c
+++ b/hw/arm/nseries.c
@@ -239,8 +239,9 @@ static void n800_key_event(void *opaque, int keycode)
int code = s->keymap[keycode & 0x7f];
if (code == -1) {
- if ((keycode & 0x7f) == RETU_KEYCODE)
+ if ((keycode & 0x7f) == RETU_KEYCODE) {
retu_key_event(s->retu, !(keycode & 0x80));
+ }
return;
}
@@ -280,11 +281,14 @@ static void n800_tsc_kbd_setup(struct n800_s *s)
s->ts.opaque = s->ts.chip->opaque;
s->ts.txrx = tsc210x_txrx;
- for (i = 0; i < 0x80; i ++)
+ for (i = 0; i < 0x80; i++) {
s->keymap[i] = -1;
- for (i = 0; i < 0x10; i ++)
- if (n800_keys[i] >= 0)
+ }
+ for (i = 0; i < 0x10; i++) {
+ if (n800_keys[i] >= 0) {
s->keymap[n800_keys[i]] = i;
+ }
+ }
qemu_add_kbd_event_handler(n800_key_event, s);
@@ -308,8 +312,9 @@ static void n810_key_event(void *opaque, int keycode)
int code = s->keymap[keycode & 0x7f];
if (code == -1) {
- if ((keycode & 0x7f) == RETU_KEYCODE)
+ if ((keycode & 0x7f) == RETU_KEYCODE) {
retu_key_event(s->retu, !(keycode & 0x80));
+ }
return;
}
@@ -388,11 +393,14 @@ static void n810_kbd_setup(struct n800_s *s)
qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO);
int i;
- for (i = 0; i < 0x80; i ++)
+ for (i = 0; i < 0x80; i++) {
s->keymap[i] = -1;
- for (i = 0; i < 0x80; i ++)
- if (n810_keys[i] > 0)
+ }
+ for (i = 0; i < 0x80; i++) {
+ if (n810_keys[i] > 0) {
s->keymap[n810_keys[i]] = i;
+ }
+ }
qemu_add_kbd_event_handler(n810_key_event, s);
@@ -449,17 +457,20 @@ static uint32_t mipid_txrx(void *opaque, uint32_t cmd,
int len)
struct mipid_s *s = (struct mipid_s *) opaque;
uint8_t ret;
- if (len > 9)
+ if (len > 9) {
hw_error("%s: FIXME: bad SPI word width %i\n", __FUNCTION__, len);
+ }
- if (s->p >= ARRAY_SIZE(s->resp))
+ if (s->p >= ARRAY_SIZE(s->resp)) {
ret = 0;
- else
- ret = s->resp[s->p ++];
- if (s->pm --> 0)
+ } else {
+ ret = s->resp[s->p++];
+ }
+ if (s->pm-- > 0) {
s->param[s->pm] = cmd;
- else
+ } else {
s->cmd = cmd;
+ }
switch (s->cmd) {
case 0x00: /* NOP */
@@ -560,15 +571,17 @@ static uint32_t mipid_txrx(void *opaque, uint32_t cmd,
int len)
goto bad_cmd;
case 0x25: /* WRCNTR */
- if (s->pm < 0)
+ if (s->pm < 0) {
s->pm = 1;
+ }
goto bad_cmd;
case 0x26: /* GAMSET */
- if (!s->pm)
+ if (!s->pm) {
s->gamma = ffs(s->param[0] & 0xf) - 1;
- else if (s->pm < 0)
+ } else if (s->pm < 0) {
s->pm = 1;
+ }
break;
case 0x28: /* DISPOFF */
@@ -591,10 +604,11 @@ static uint32_t mipid_txrx(void *opaque, uint32_t cmd,
int len)
s->te = 0;
break;
case 0x35: /* TEON */
- if (!s->pm)
+ if (!s->pm) {
s->te = 1;
- else if (s->pm < 0)
+ } else if (s->pm < 0) {
s->pm = 1;
+ }
break;
case 0x36: /* MADCTR */
@@ -613,8 +627,9 @@ static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int
len)
case 0xb0: /* CLKINT / DISCTL */
case 0xb1: /* CLKEXT */
- if (s->pm < 0)
+ if (s->pm < 0) {
s->pm = 2;
+ }
break;
case 0xb4: /* FRMSEL */
@@ -635,8 +650,9 @@ static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int
len)
break;
case 0xc2: /* IFMOD */
- if (s->pm < 0)
+ if (s->pm < 0) {
s->pm = 2;
+ }
break;
case 0xc6: /* PWRCTL */
@@ -847,21 +863,22 @@ static void n800_setup_nolo_tags(void *sram_base)
p = sram_base + 0x9000;
#define ADD_TAG(tag, len) \
stw_raw((uint16_t *) p + 0, tag); \
- stw_raw((uint16_t *) p + 1, len); p ++; \
- stl_raw(p ++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
+ stw_raw((uint16_t *) p + 1, len); p++; \
+ stl_raw(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
/* OMAP STI console? Pin out settings? */
ADD_TAG(0x6e01, 414);
- for (i = 0; i < ARRAY_SIZE(n800_pinout); i ++)
- stl_raw(v ++, n800_pinout[i]);
+ for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) {
+ stl_raw(v++, n800_pinout[i]);
+ }
/* Kernel memsize? */
ADD_TAG(0x6e05, 1);
- stl_raw(v ++, 2);
+ stl_raw(v++, 2);
/* NOLO serial console */
ADD_TAG(0x6e02, 4);
- stl_raw(v ++, XLDR_LL_UART); /* UART number (1 - 3) */
+ stl_raw(v++, XLDR_LL_UART); /* UART number (1 - 3) */
#if 0
/* CBUS settings (Retu/AVilma) */
@@ -876,23 +893,23 @@ static void n800_setup_nolo_tags(void *sram_base)
ADD_TAG(0x6e0a, 4);
stw_raw((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */
stw_raw((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */
- v ++;
+ v++;
/* LCD console? */
ADD_TAG(0x6e04, 4);
stw_raw((uint16_t *) v + 0, 30); /* ??? */
stw_raw((uint16_t *) v + 1, 24); /* ??? */
- v ++;
+ v++;
#if 0
/* LCD settings */
ADD_TAG(0x6e06, 2);
- stw_raw((uint16_t *) (v ++), 15); /* ??? */
+ stw_raw((uint16_t *) (v++), 15); /* ??? */
#endif
/* I^2C (Menelaus) */
ADD_TAG(0x6e07, 4);
- stl_raw(v ++, 0x00720000); /* ??? */
+ stl_raw(v++, 0x00720000); /* ??? */
/* Unknown */
ADD_TAG(0x6e0b, 6);
@@ -922,30 +939,30 @@ static void n800_setup_nolo_tags(void *sram_base)
/* Bluetooth */
ADD_TAG(0x6e0e, 12);
- stl_raw(v ++, 0x5c623d01); /* ??? */
- stl_raw(v ++, 0x00000201); /* ??? */
- stl_raw(v ++, 0x00000000); /* ??? */
+ stl_raw(v++, 0x5c623d01); /* ??? */
+ stl_raw(v++, 0x00000201); /* ??? */
+ stl_raw(v++, 0x00000000); /* ??? */
/* CX3110x WLAN settings */
ADD_TAG(0x6e0f, 8);
- stl_raw(v ++, 0x00610025); /* ??? */
- stl_raw(v ++, 0xffff0057); /* ??? */
+ stl_raw(v++, 0x00610025); /* ??? */
+ stl_raw(v++, 0xffff0057); /* ??? */
/* MMC host settings */
ADD_TAG(0x6e10, 12);
- stl_raw(v ++, 0xffff000f); /* ??? */
- stl_raw(v ++, 0xffffffff); /* ??? */
- stl_raw(v ++, 0x00000060); /* ??? */
+ stl_raw(v++, 0xffff000f); /* ??? */
+ stl_raw(v++, 0xffffffff); /* ??? */
+ stl_raw(v++, 0x00000060); /* ??? */
/* OneNAND chip select */
ADD_TAG(0x6e11, 10);
- stl_raw(v ++, 0x00000401); /* ??? */
- stl_raw(v ++, 0x0002003a); /* ??? */
- stl_raw(v ++, 0x00000002); /* ??? */
+ stl_raw(v++, 0x00000401); /* ??? */
+ stl_raw(v++, 0x0002003a); /* ??? */
+ stl_raw(v++, 0x00000002); /* ??? */
/* TEA5761 sensor settings */
ADD_TAG(0x6e12, 2);
- stl_raw(v ++, 93); /* GPIO num ??? */
+ stl_raw(v++, 93); /* GPIO num ??? */
#if 0
/* Unknown tag */
@@ -956,8 +973,8 @@ static void n800_setup_nolo_tags(void *sram_base)
#endif
/* End of the list */
- stl_raw(p ++, 0x00000000);
- stl_raw(p ++, 0x00000000);
+ stl_raw(p++, 0x00000000);
+ stl_raw(p++, 0x00000000);
}
/* This task is normally performed by the bootloader. If we're loading
@@ -1032,8 +1049,9 @@ static void n8x0_boot_init(void *opaque)
s->mpu->cpu->env.GE = 0x5;
/* If the machine has a slided keyboard, open it */
- if (s->kbd)
+ if (s->kbd) {
qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO));
+ }
}
#define OMAP_TAG_NOKIA_BT 0x4e01
@@ -1119,112 +1137,112 @@ static int n8x0_atag_setup(void *p, int model)
w = p;
- stw_raw(w ++, OMAP_TAG_UART); /* u16 tag */
- stw_raw(w ++, 4); /* u16 len */
- stw_raw(w ++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
- w ++;
+ stw_raw(w++, OMAP_TAG_UART); /* u16 tag */
+ stw_raw(w++, 4); /* u16 len */
+ stw_raw(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
+ w++;
#if 0
- stw_raw(w ++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */
- stw_raw(w ++, 4); /* u16 len */
- stw_raw(w ++, XLDR_LL_UART + 1); /* u8 console_uart */
- stw_raw(w ++, 115200); /* u32 console_speed */
+ stw_raw(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */
+ stw_raw(w++, 4); /* u16 len */
+ stw_raw(w++, XLDR_LL_UART + 1); /* u8 console_uart */
+ stw_raw(w++, 115200); /* u32 console_speed */
#endif
- stw_raw(w ++, OMAP_TAG_LCD); /* u16 tag */
- stw_raw(w ++, 36); /* u16 len */
+ stw_raw(w++, OMAP_TAG_LCD); /* u16 tag */
+ stw_raw(w++, 36); /* u16 len */
strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */
w += 8;
strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */
w += 8;
- stw_raw(w ++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */
- stw_raw(w ++, 24); /* u8 data_lines */
+ stw_raw(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */
+ stw_raw(w++, 24); /* u8 data_lines */
- stw_raw(w ++, OMAP_TAG_CBUS); /* u16 tag */
- stw_raw(w ++, 8); /* u16 len */
- stw_raw(w ++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */
- stw_raw(w ++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */
- stw_raw(w ++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */
- w ++;
+ stw_raw(w++, OMAP_TAG_CBUS); /* u16 tag */
+ stw_raw(w++, 8); /* u16 len */
+ stw_raw(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */
+ stw_raw(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */
+ stw_raw(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */
+ w++;
- stw_raw(w ++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */
- stw_raw(w ++, 4); /* u16 len */
- stw_raw(w ++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */
- stw_raw(w ++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */
+ stw_raw(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */
+ stw_raw(w++, 4); /* u16 len */
+ stw_raw(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */
+ stw_raw(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */
gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info;
- for (; gpiosw->name; gpiosw ++) {
- stw_raw(w ++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */
- stw_raw(w ++, 20); /* u16 len */
+ for (; gpiosw->name; gpiosw++) {
+ stw_raw(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */
+ stw_raw(w++, 20); /* u16 len */
strcpy((void *) w, gpiosw->name); /* char name[12] */
w += 6;
- stw_raw(w ++, gpiosw->line); /* u16 gpio */
- stw_raw(w ++, gpiosw->type);
- stw_raw(w ++, 0);
- stw_raw(w ++, 0);
+ stw_raw(w++, gpiosw->line); /* u16 gpio */
+ stw_raw(w++, gpiosw->type);
+ stw_raw(w++, 0);
+ stw_raw(w++, 0);
}
- stw_raw(w ++, OMAP_TAG_NOKIA_BT); /* u16 tag */
- stw_raw(w ++, 12); /* u16 len */
+ stw_raw(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */
+ stw_raw(w++, 12); /* u16 len */
b = (void *) w;
- stb_raw(b ++, 0x01); /* u8 chip_type (CSR) */
- stb_raw(b ++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */
- stb_raw(b ++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */
- stb_raw(b ++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */
- stb_raw(b ++, BT_UART + 1); /* u8 bt_uart */
+ stb_raw(b++, 0x01); /* u8 chip_type (CSR) */
+ stb_raw(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */
+ stb_raw(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */
+ stb_raw(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */
+ stb_raw(b++, BT_UART + 1); /* u8 bt_uart */
memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */
b += 6;
- stb_raw(b ++, 0x02); /* u8 bt_sysclk (38.4) */
+ stb_raw(b++, 0x02); /* u8 bt_sysclk (38.4)
*/
w = (void *) b;
- stw_raw(w ++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */
- stw_raw(w ++, 8); /* u16 len */
- stw_raw(w ++, 0x25); /* u8 chip_type */
- stw_raw(w ++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */
- stw_raw(w ++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */
- stw_raw(w ++, -1); /* s16 spi_cs_gpio */
+ stw_raw(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */
+ stw_raw(w++, 8); /* u16 len */
+ stw_raw(w++, 0x25); /* u8 chip_type */
+ stw_raw(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */
+ stw_raw(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */
+ stw_raw(w++, -1); /* s16 spi_cs_gpio */
- stw_raw(w ++, OMAP_TAG_MMC); /* u16 tag */
- stw_raw(w ++, 16); /* u16 len */
+ stw_raw(w++, OMAP_TAG_MMC); /* u16 tag */
+ stw_raw(w++, 16); /* u16 len */
if (model == 810) {
- stw_raw(w ++, 0x23f); /* unsigned flags */
- stw_raw(w ++, -1); /* s16 power_pin */
- stw_raw(w ++, -1); /* s16 switch_pin */
- stw_raw(w ++, -1); /* s16 wp_pin */
- stw_raw(w ++, 0x240); /* unsigned flags */
- stw_raw(w ++, 0xc000); /* s16 power_pin */
- stw_raw(w ++, 0x0248); /* s16 switch_pin */
- stw_raw(w ++, 0xc000); /* s16 wp_pin */
+ stw_raw(w++, 0x23f); /* unsigned flags */
+ stw_raw(w++, -1); /* s16 power_pin */
+ stw_raw(w++, -1); /* s16 switch_pin */
+ stw_raw(w++, -1); /* s16 wp_pin */
+ stw_raw(w++, 0x240); /* unsigned flags */
+ stw_raw(w++, 0xc000); /* s16 power_pin */
+ stw_raw(w++, 0x0248); /* s16 switch_pin */
+ stw_raw(w++, 0xc000); /* s16 wp_pin */
} else {
- stw_raw(w ++, 0xf); /* unsigned flags */
- stw_raw(w ++, -1); /* s16 power_pin */
- stw_raw(w ++, -1); /* s16 switch_pin */
- stw_raw(w ++, -1); /* s16 wp_pin */
- stw_raw(w ++, 0); /* unsigned flags */
- stw_raw(w ++, 0); /* s16 power_pin */
- stw_raw(w ++, 0); /* s16 switch_pin */
- stw_raw(w ++, 0); /* s16 wp_pin */
+ stw_raw(w++, 0xf); /* unsigned flags */
+ stw_raw(w++, -1); /* s16 power_pin */
+ stw_raw(w++, -1); /* s16 switch_pin */
+ stw_raw(w++, -1); /* s16 wp_pin */
+ stw_raw(w++, 0); /* unsigned flags */
+ stw_raw(w++, 0); /* s16 power_pin */
+ stw_raw(w++, 0); /* s16 switch_pin */
+ stw_raw(w++, 0); /* s16 wp_pin */
}
- stw_raw(w ++, OMAP_TAG_TEA5761); /* u16 tag */
- stw_raw(w ++, 4); /* u16 len */
- stw_raw(w ++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */
- w ++;
+ stw_raw(w++, OMAP_TAG_TEA5761); /* u16 tag */
+ stw_raw(w++, 4); /* u16 len */
+ stw_raw(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */
+ w++;
partition = (model == 810) ? n810_part_info : n800_part_info;
- for (; partition->name; partition ++) {
- stw_raw(w ++, OMAP_TAG_PARTITION); /* u16 tag */
- stw_raw(w ++, 28); /* u16 len */
+ for (; partition->name; partition++) {
+ stw_raw(w++, OMAP_TAG_PARTITION); /* u16 tag */
+ stw_raw(w++, 28); /* u16 len */
strcpy((void *) w, partition->name); /* char name[16] */
l = (void *) (w + 8);
- stl_raw(l ++, partition->size); /* unsigned int size */
- stl_raw(l ++, partition->offset); /* unsigned int offset */
- stl_raw(l ++, partition->mask); /* unsigned int
mask_flags */
+ stl_raw(l++, partition->size); /* unsigned int size */
+ stl_raw(l++, partition->offset); /* unsigned int offset */
+ stl_raw(l++, partition->mask); /* unsigned int mask_flags */
w = (void *) l;
}
- stw_raw(w ++, OMAP_TAG_BOOT_REASON); /* u16 tag */
- stw_raw(w ++, 12); /* u16 len */
+ stw_raw(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */
+ stw_raw(w++, 12); /* u16 len */
#if 0
strcpy((void *) w, "por"); /* char reason_str[12] */
strcpy((void *) w, "charger"); /* char reason_str[12] */
@@ -1242,15 +1260,15 @@ static int n8x0_atag_setup(void *p, int model)
w += 6;
tag = (model == 810) ? "RX-44" : "RX-34";
- stw_raw(w ++, OMAP_TAG_VERSION_STR); /* u16 tag */
- stw_raw(w ++, 24); /* u16 len */
+ stw_raw(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
+ stw_raw(w++, 24); /* u16 len */
strcpy((void *) w, "product"); /* char component[12] */
w += 6;
strcpy((void *) w, tag); /* char version[12] */
w += 6;
- stw_raw(w ++, OMAP_TAG_VERSION_STR); /* u16 tag */
- stw_raw(w ++, 24); /* u16 len */
+ stw_raw(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
+ stw_raw(w++, 24); /* u16 len */
strcpy((void *) w, "hw-build"); /* char component[12] */
w += 6;
strcpy((void *) w, "QEMU ");
@@ -1258,8 +1276,8 @@ static int n8x0_atag_setup(void *p, int model)
w += 6;
tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu";
- stw_raw(w ++, OMAP_TAG_VERSION_STR); /* u16 tag */
- stw_raw(w ++, 24); /* u16 len */
+ stw_raw(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
+ stw_raw(w++, 24); /* u16 len */
strcpy((void *) w, "nolo"); /* char component[12] */
w += 6;
strcpy((void *) w, tag); /* char version[12] */
@@ -1315,9 +1333,9 @@ static void n8x0_init(MachineState *machine,
n8x0_gpio_setup(s);
n8x0_nand_setup(s);
n8x0_i2c_setup(s);
- if (model == 800)
+ if (model == 800) {
n800_tsc_kbd_setup(s);
- else if (model == 810) {
+ } else if (model == 810) {
n810_tsc_setup(s);
n810_kbd_setup(s);
}
--
1.8.3.1
- [Qemu-devel] [PULL 00/33] softmmu cleanups and target-i386 paging fixes, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 01/33] cputlb: Fix regression with TCG interpreter (bug 1310324), Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 02/33] nseries: clean up coding style,
Paolo Bonzini <=
- [Qemu-devel] [PULL 03/33] hw: use ld_p/st_p instead of ld_raw/st_raw, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 04/33] softmmu: start introducing SOFTMMU_CODE_ACCESS in softmmu_header.h, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 06/33] softmmu: move definition of CPU_MMU_INDEX to inclusion site, drop ACCESS_TYPE, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 07/33] softmmu: make do_unaligned_access a method of CPU, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 08/33] softmmu: move ALIGNED_ONLY to cpu.h, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 05/33] softmmu: move MMUSUFFIX under SOFTMMU_CODE_ACCESS, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 09/33] softmmu: commonize helper definitions, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 12/33] softmmu: introduce cpu_ldst.h, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 10/33] softmmu: move softmmu_template.h out of include/, Paolo Bonzini, 2014/06/05
- [Qemu-devel] [PULL 11/33] target-arm: move arm_*_code to a separate file, Paolo Bonzini, 2014/06/05