[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v3 15/32] target-arm: add NSACR register
From: |
Fabian Aggeler |
Subject: |
[Qemu-devel] [PATCH v3 15/32] target-arm: add NSACR register |
Date: |
Wed, 11 Jun 2014 01:54:57 +0200 |
Implements NSACR register with corresponding read/write functions
for ARMv7 and ARMv8.
Signed-off-by: Sergey Fedorov <address@hidden>
Signed-off-by: Fabian Aggeler <address@hidden>
---
target-arm/cpu.h | 6 +++++
target-arm/helper.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 73 insertions(+), 1 deletion(-)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 52e679f..bc9edaa 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -182,6 +182,7 @@ typedef struct CPUARMState {
uint64_t c1_coproc; /* Coprocessor access register. */
uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */
uint32_t c1_scr; /* secure config register. */
+ uint32_t c1_nsacr; /* Non-secure access control register. */
uint64_t ttbr0_el1; /* MMU translation table base 0. */
uint64_t ttbr1_el1; /* MMU translation table base 1. */
uint64_t c2_control; /* MMU translation table base control. */
@@ -593,6 +594,11 @@ static inline void xpsr_write(CPUARMState *env, uint32_t
val, uint32_t mask)
#define SCR_RES1_MASK (3U << 4)
#define SCR_MASK (0x3fff & ~SCR_RES1_MASK)
+#define NSACR_NSTRCDIS (1U << 20)
+#define NSACR_RFR (1U << 19)
+#define NSACR_NSASEDIS (1U << 15)
+#define NSACR_NSD32DIS (1U << 14)
+
/* Return the current FPSCR value. */
uint32_t vfp_get_fpscr(CPUARMState *env);
void vfp_set_fpscr(CPUARMState *env, uint32_t val);
diff --git a/target-arm/helper.c b/target-arm/helper.c
index f6ff4aa..9671f9f 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -489,7 +489,19 @@ static void cpacr_write(CPUARMState *env, const
ARMCPRegInfo *ri,
/* VFP coprocessor: cp10 & cp11 [23:20] */
mask |= (1 << 31) | (1 << 30) | (0xf << 20);
- if (!arm_feature(env, ARM_FEATURE_NEON)) {
+ if (arm_feature(env, ARM_FEATURE_NEON)) {
+ /* NSACR can disable non-secure writes to
+ * ASEDIS [31] or D32DIS [30]
+ */
+ if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env)) {
+ if ((env->cp15.c1_nsacr & NSACR_NSASEDIS)) {
+ mask &= ~(1 << 31);
+ }
+ if ((env->cp15.c1_nsacr & NSACR_NSD32DIS)) {
+ mask &= ~(1 << 30);
+ }
+ }
+ } else {
/* ASEDIS [31] bit is RAO/WI */
value |= (1 << 31);
}
@@ -501,6 +513,7 @@ static void cpacr_write(CPUARMState *env, const
ARMCPRegInfo *ri,
!arm_feature(env, ARM_FEATURE_VFP3)) {
/* D32DIS [30] is RAO/WI if D16-31 are not implemented. */
value |= (1 << 30);
+ mask |= (1 << 30);
}
}
value &= mask;
@@ -2184,6 +2197,55 @@ static void scr_write(CPUARMState *env, const
ARMCPRegInfo *ri, uint64_t value)
raw_write(env, ri, value);
}
+static void nsacr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ uint32_t mask = 0;
+
+ /* Pre ARMv8 some bits are RAO or UNK/SBZP */
+ if (!arm_feature(env, ARM_FEATURE_V8)) {
+
+ if (arm_feature(env, ARM_FEATURE_VFP)) {
+ mask |= NSACR_NSASEDIS | NSACR_NSD32DIS;
+
+ if (!arm_feature(env, ARM_FEATURE_NEON)) {
+ /* NSASEDIS are RAO/WI */
+ value |= NSACR_NSASEDIS;
+ }
+
+ /* VFPv3 and upwards with NEON implement 32 double precision
+ * registers (D0-D31).
+ */
+ if (!arm_feature(env, ARM_FEATURE_NEON) ||
+ !arm_feature(env, ARM_FEATURE_VFP3)) {
+ /* NSD32DIS is RAO/WI if D16-31 are not implemented. */
+ value |= NSACR_NSD32DIS;
+ }
+ }
+
+ /* cpn bits [13:0] */
+ mask = 0x3fff;
+
+ value &= mask;
+ }
+
+ raw_write(env, ri, value);
+}
+
+static uint64_t nsacr_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ uint64_t ret = raw_read(env, ri);
+
+ if (arm_feature(env, ARM_FEATURE_V8)) {
+ if (!arm_feature(env, ARM_FEATURE_EL3) || (
+ arm_el_is_aa64(env, 3) && !is_a64(env) &&
+ arm_current_pl(env) != 3)) {
+ ret = 0x0000C00;
+ }
+ }
+ return ret;
+}
+
static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
{ .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
@@ -2217,6 +2279,10 @@ static const ARMCPRegInfo security_cp_reginfo[] = {
{ .name = "SCR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 0,
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
.resetvalue = 0, },
+ { .name = "NSACR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 2,
+ .access = PL3_RW | PL1_R, .resetvalue = 0,
+ .writefn = nsacr_write, .readfn = nsacr_read,
+ .fieldoffset = offsetof(CPUARMState, cp15.c1_nsacr) },
REGINFO_SENTINEL
};
--
1.8.3.2
[Qemu-devel] [PATCH v3 15/32] target-arm: add NSACR register,
Fabian Aggeler <=
[Qemu-devel] [PATCH v3 08/32] target-arm: A32: Emulate the SMC instruction, Fabian Aggeler, 2014/06/10
[Qemu-devel] [PATCH v3 03/32] target-arm: increase arrays of registers R13 & R14, Fabian Aggeler, 2014/06/10
[Qemu-devel] [PATCH v3 14/32] target-arm: Respect SCR.FW, SCR.AW and SCTLR.NMFI, Fabian Aggeler, 2014/06/10
[Qemu-devel] [PATCH v3 06/32] target-arm: make arm_current_pl() return PL3, Fabian Aggeler, 2014/06/10