[Qemu-devel] [PATCH v3 08/16] target-arm: Add SCR_EL3

[Edgar E. Iglesias]

From: "Edgar E. Iglesias" <address@hidden>

Signed-off-by: Edgar E. Iglesias <address@hidden>
---
 target-arm/cpu.h    | 16 +++++++++++++++-
 target-arm/helper.c | 31 ++++++++++++++++++++++++++++++-
 2 files changed, 45 insertions(+), 2 deletions(-)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index fd57fb5..fa8dee0 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -172,7 +172,6 @@ typedef struct CPUARMState {
         uint64_t c1_sys; /* System control register.  */
         uint64_t c1_coproc; /* Coprocessor access register.  */
         uint32_t c1_xscaleauxcr; /* XScale auxiliary control register.  */
-        uint32_t c1_scr; /* secure config register.  */
         uint64_t ttbr0_el1; /* MMU translation table base 0. */
         uint64_t ttbr1_el1; /* MMU translation table base 1. */
         uint64_t c2_control; /* MMU translation table base control.  */
@@ -185,6 +184,7 @@ typedef struct CPUARMState {
         uint32_t pmsav5_data_ap; /* PMSAv5 MPU data access permissions */
         uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */
         uint64_t hcr_el2; /* Hypervisor configuration register */
+        uint32_t scr_el3; /* Secure configuration register.  */
         uint32_t ifsr_el2; /* Fault status registers.  */
         uint64_t esr_el[4];
         uint32_t c6_region[8]; /* MPU base/size registers.  */
@@ -562,6 +562,20 @@ static inline void xpsr_write(CPUARMState *env, uint32_t 
val, uint32_t mask)
 #define HCR_ID        (1ULL << 33)
 #define HCR_MASK      ((1ULL << 34) - 1)
 
+#define SCR_NS        (1U << 0)
+#define SCR_IRQ       (1U << 1)
+#define SCR_FIQ       (1U << 2)
+#define SCR_EA        (1U << 3)
+#define SCR_SMD       (1U << 7)
+#define SCR_HCE       (1U << 8)
+#define SCR_SIF       (1U << 9)
+#define SCR_RW        (1U << 10)
+#define SCR_ST        (1U << 11)
+#define SCR_TWI       (1U << 12)
+#define SCR_TWE       (1U << 13)
+#define SCR_RES1_MASK (3U << 4)
+#define SCR_MASK      (0x3fff & ~SCR_RES1_MASK)
+
 /* Return the current FPSCR value.  */
 uint32_t vfp_get_fpscr(CPUARMState *env);
 void vfp_set_fpscr(CPUARMState *env, uint32_t val);
diff --git a/target-arm/helper.c b/target-arm/helper.c
index b04fb5d..6bacc24 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -793,7 +793,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.vbar_el[1]),
       .resetvalue = 0 },
     { .name = "SCR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 0,
-      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_scr),
+      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
       .resetvalue = 0, },
     { .name = "CCSIDR", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0,
@@ -2161,6 +2161,31 @@ static const ARMCPRegInfo v8_el2_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
+static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+    uint32_t valid_mask = SCR_MASK;
+
+    if (!arm_feature(env, ARM_FEATURE_EL2)) {
+        valid_mask &= ~SCR_HCE;
+
+        /* On ARMv7, SMD (or SCD as it is called in v7) is only
+         * supported if EL2 exists. The bit is UNK/SBZP when
+         * EL2 is unavailable. In QEMU ARMv7, we force it to always zero
+         * when EL2 is unavailable.
+         */
+        if (arm_feature(env, ARM_FEATURE_V7)) {
+            valid_mask &= ~SCR_SMD;
+        }
+    }
+
+    /* Set RES1 bits.  */
+    value |= SCR_RES1_MASK;
+
+    /* Clear RES0 bits.  */
+    value &= valid_mask;
+    raw_write(env, ri, value);
+}
+
 static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
     { .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
       .type = ARM_CP_NO_MIGRATE,
@@ -2183,6 +2208,10 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
       .access = PL3_RW, .writefn = vbar_write,
       .fieldoffset = offsetof(CPUARMState, cp15.vbar_el[3]),
       .resetvalue = 0 },
+    { .name = "SCR_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0,
+      .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
+      .writefn = scr_write },
     REGINFO_SENTINEL
 };
 
-- 
1.8.3.2