[Qemu-devel] [PULL 29/29] target-mips: enable XPA and LPA features

[Leon Alrae]

Enable XPA in MIPS32R5-generic and LPA in MIPS64R6-generic.

Signed-off-by: Leon Alrae <address@hidden>
Reviewed-by: Aurelien Jarno <address@hidden>
---
 target-mips/translate_init.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/target-mips/translate_init.c b/target-mips/translate_init.c
index 5f0cf9a..30605da 100644
--- a/target-mips/translate_init.c
+++ b/target-mips/translate_init.c
@@ -400,10 +400,12 @@ static const mips_def_t mips_defs[] =
                        (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
                        (1 << CP0C1_CA),
         .CP0_Config2 = MIPS_CONFIG2,
-        .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_MSAP),
+        .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_MSAP) |
+                       (1 << CP0C3_LPA),
         .CP0_Config4 = MIPS_CONFIG4 | (1U << CP0C4_M),
         .CP0_Config4_rw_bitmask = 0,
-        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_UFR) | (1 << CP0C5_LLB),
+        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_UFR) | (1 << CP0C5_LLB) |
+                       (1 << CP0C5_MVH),
         .CP0_Config5_rw_bitmask = (0 << CP0C5_M) | (1 << CP0C5_K) |
                                   (1 << CP0C5_CV) | (0 << CP0C5_EVA) |
                                   (1 << CP0C5_MSAEn) | (1 << CP0C5_UFR) |
@@ -413,11 +415,12 @@ static const mips_def_t mips_defs[] =
         .SYNCI_Step = 32,
         .CCRes = 2,
         .CP0_Status_rw_bitmask = 0x3778FF1F,
+        .CP0_PageGrain_rw_bitmask = (1 << CP0PG_ELPA),
         .CP1_fcr0 = (1 << FCR0_UFRP) | (1 << FCR0_F64) | (1 << FCR0_L) |
                     (1 << FCR0_W) | (1 << FCR0_D) | (1 << FCR0_S) |
                     (0x93 << FCR0_PRID),
         .SEGBITS = 32,
-        .PABITS = 32,
+        .PABITS = 40,
         .insn_flags = CPU_MIPS32R5 | ASE_MIPS16 | ASE_MSA,
         .mmu_type = MMU_TYPE_R4000,
     },
@@ -616,7 +619,8 @@ static const mips_def_t mips_defs[] =
                        (0 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
         .CP0_Config2 = MIPS_CONFIG2,
         .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_RXI) | (1 << CP0C3_BP) |
-                       (1 << CP0C3_BI) | (1 << CP0C3_ULRI) | (1U << CP0C3_M),
+                       (1 << CP0C3_BI) | (1 << CP0C3_ULRI) | (1 << CP0C3_LPA) |
+                       (1U << CP0C3_M),
         .CP0_Config4 = MIPS_CONFIG4 | (0xfc << CP0C4_KScrExist) |
                        (3 << CP0C4_IE) | (1 << CP0C4_M),
         .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_LLB),
@@ -629,12 +633,12 @@ static const mips_def_t mips_defs[] =
         .CP0_Status_rw_bitmask = 0x30D8FFFF,
         .CP0_PageGrain = (1 << CP0PG_IEC) | (1 << CP0PG_XIE) |
                          (1U << CP0PG_RIE),
-        .CP0_PageGrain_rw_bitmask = 0,
+        .CP0_PageGrain_rw_bitmask = (1 << CP0PG_ELPA),
         .CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_F64) | (1 << FCR0_L) |
                     (1 << FCR0_W) | (1 << FCR0_D) | (1 << FCR0_S) |
                     (0x00 << FCR0_PRID) | (0x0 << FCR0_REV),
         .SEGBITS = 42,
-        .PABITS = 36,
+        .PABITS = 48,
         .insn_flags = CPU_MIPS64R6,
         .mmu_type = MMU_TYPE_R4000,
     },
-- 
2.1.0