[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 20/29] net/dp8393x: add load/save support
From: |
Leon Alrae |
Subject: |
[Qemu-devel] [PULL 20/29] net/dp8393x: add load/save support |
Date: |
Fri, 12 Jun 2015 10:35:27 +0100 |
From: Hervé Poussineau <address@hidden>
Signed-off-by: Hervé Poussineau <address@hidden>
Reviewed-by: Aurelien Jarno <address@hidden>
Signed-off-by: Leon Alrae <address@hidden>
---
hw/net/dp8393x.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index ef1fb0e..4184045 100644
--- a/hw/net/dp8393x.c
+++ b/hw/net/dp8393x.c
@@ -853,6 +853,17 @@ static void dp8393x_realize(DeviceState *dev, Error **errp)
prom[7] = 0xff - checksum;
}
+static const VMStateDescription vmstate_dp8393x = {
+ .name = "dp8393x",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField []) {
+ VMSTATE_BUFFER_UNSAFE(cam, dp8393xState, 0, 16 * 6),
+ VMSTATE_UINT16_ARRAY(regs, dp8393xState, 0x40),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
static Property dp8393x_properties[] = {
DEFINE_NIC_PROPERTIES(dp8393xState, conf),
DEFINE_PROP_PTR("dma_mr", dp8393xState, dma_mr),
@@ -867,6 +878,7 @@ static void dp8393x_class_init(ObjectClass *klass, void
*data)
set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
dc->realize = dp8393x_realize;
dc->reset = dp8393x_reset;
+ dc->vmsd = &vmstate_dp8393x;
dc->props = dp8393x_properties;
}
--
2.1.0
- [Qemu-devel] [PULL 09/29] dma/rc4030: create custom DMA address space, (continued)
- [Qemu-devel] [PULL 09/29] dma/rc4030: create custom DMA address space, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 15/29] net/dp8393x: always calculate proper checksums, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 13/29] dma/rc4030: use trace events instead of custom logging, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 02/29] target-mips: add Config5.FRE support allowing Status.FR=0 emulation, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 10/29] dma/rc4030: use AddressSpace and address_space_rw in users, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 14/29] dma/rc4030: convert to QOM, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 16/29] net/dp8393x: do not use old_mmio accesses, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 25/29] target-mips: support Page Frame Number Extension field, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 23/29] target-mips: correct MFC0 for CP0.EntryLo in MIPS64, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 21/29] net/dp8393x: correctly reset in_use field, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 20/29] net/dp8393x: add load/save support,
Leon Alrae <=
- [Qemu-devel] [PULL 22/29] net/dp8393x: fix hardware reset, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 19/29] net/dp8393x: add PROM to store MAC address, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 17/29] net/dp8393x: use dp8393x_ prefix for all functions, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 18/29] net/dp8393x: QOM'ify, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 28/29] target-mips: remove misleading comments in translate_init.c, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 29/29] target-mips: enable XPA and LPA features, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 24/29] target-mips: extend selected CP0 registers to 64-bits in MIPS32, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 27/29] target-mips: add MTHC0 and MFHC0 instructions, Leon Alrae, 2015/06/12
- [Qemu-devel] [PULL 26/29] target-mips: add CP0.PageGrain.ELPA support, Leon Alrae, 2015/06/12
- Re: [Qemu-devel] [PULL 00/29] target-mips queue, Peter Maydell, 2015/06/12