[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 04/17] ppc: Add number of threads per core to th
From: |
Bharata B Rao |
Subject: |
Re: [Qemu-devel] [PATCH 04/17] ppc: Add number of threads per core to the processor definition |
Date: |
Tue, 15 Mar 2016 13:51:40 +0530 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
On Mon, Mar 14, 2016 at 08:20:52PM +0100, Thomas Huth wrote:
> On 14.03.2016 17:56, Cédric Le Goater wrote:
> > From: Benjamin Herrenschmidt <address@hidden>
> >
> > Also use it to clamp the max SMT mode and ensure that the cpu_dt_id
> > are offset by that value in order to preserve consistency with the
> > HW implementations.
> >
> > Signed-off-by: Benjamin Herrenschmidt <address@hidden>
> > ---
> > target-ppc/cpu-qom.h | 1 +
> > target-ppc/translate_init.c | 11 ++++++++++-
> > 2 files changed, 11 insertions(+), 1 deletion(-)
> >
> > diff --git a/target-ppc/cpu-qom.h b/target-ppc/cpu-qom.h
> > index 7d5e2b36a997..735981309c5b 100644
> > --- a/target-ppc/cpu-qom.h
> > +++ b/target-ppc/cpu-qom.h
> > @@ -68,6 +68,7 @@ typedef struct PowerPCCPUClass {
> > uint32_t flags;
> > int bfd_mach;
> > uint32_t l1_dcache_size, l1_icache_size;
> > + uint32_t threads_per_core;
> > #if defined(TARGET_PPC64)
> > const struct ppc_segment_page_sizes *sps;
> > #endif
> > diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c
> > index 43c6e524a6bc..46dabe58783a 100644
> > --- a/target-ppc/translate_init.c
> > +++ b/target-ppc/translate_init.c
> > @@ -8231,6 +8231,7 @@ POWERPC_FAMILY(POWER5P)(ObjectClass *oc, void *data)
> > POWERPC_FLAG_BUS_CLK;
> > pcc->l1_dcache_size = 0x8000;
> > pcc->l1_icache_size = 0x10000;
> > + pcc->threads_per_core = 2;
> > }
> >
> > static void powerpc_get_compat(Object *obj, Visitor *v, const char *name,
> > @@ -8408,6 +8409,7 @@ POWERPC_FAMILY(POWER7)(ObjectClass *oc, void *data)
> > pcc->l1_dcache_size = 0x8000;
> > pcc->l1_icache_size = 0x8000;
> > pcc->interrupts_big_endian = ppc_cpu_interrupts_big_endian_lpcr;
> > + pcc->threads_per_core = 4;
> > }
> >
> > static void init_proc_POWER8(CPUPPCState *env)
> > @@ -8492,6 +8494,7 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data)
> > pcc->l1_dcache_size = 0x8000;
> > pcc->l1_icache_size = 0x8000;
> > pcc->interrupts_big_endian = ppc_cpu_interrupts_big_endian_lpcr;
> > + pcc->threads_per_core = 8;
> > }
> > #endif /* defined (TARGET_PPC64) */
> >
> > @@ -9195,6 +9198,12 @@ static void ppc_cpu_realizefn(DeviceState *dev,
> > Error **errp)
> > #endif
> >
> > #if !defined(CONFIG_USER_ONLY)
> > + if (pcc->threads_per_core == 0) {
> > + pcc->threads_per_core = 1;
> > + }
> > + if (max_smt > pcc->threads_per_core) {
I wonder when can the above condition be true. max_smt is kvmppc_smt_threads()
which returns threads_per_subcore via KVM_CAP_PPC_SMT capability call.
> > + max_smt = pcc->threads_per_core;
> > + }
> > if (smp_threads > max_smt) {
> > error_setg(errp, "Cannot support more than %d threads on PPC with
> > %s",
> > max_smt, kvm_enabled() ? "KVM" : "TCG");
> > @@ -9215,7 +9224,7 @@ static void ppc_cpu_realizefn(DeviceState *dev, Error
> > **errp)
> > }
> >
> > #if !defined(CONFIG_USER_ONLY)
> > - cpu->cpu_dt_id = (cs->cpu_index / smp_threads) * max_smt
> > + cpu->cpu_dt_id = (cs->cpu_index / smp_threads) * pcc->threads_per_core
> > + (cs->cpu_index % smp_threads);
> > #endif
>
> That looks like it could collide with Bharata's CPU hotplug series ...
> Bharata,
> what do you think?
In my last patchset, I was following the existing logic of DT id generation
to assign DT ids for spapr-cpu-core devices. Guess I will have to change
that when this patch is accepted.
Regards,
Bharata.
- [Qemu-devel] [PATCH 11/17] ppc: Initialize AMOR in PAPR mode, (continued)
- Re: [Qemu-devel] [PATCH 00/17] ppc: preparing pnv landing, David Gibson, 2016/03/14
- Re: [Qemu-devel] [PATCH 00/17] ppc: preparing pnv landing, Cédric Le Goater, 2016/03/15
- Re: [Qemu-devel] [PATCH 00/17] ppc: preparing pnv landing, David Gibson, 2016/03/15
- Re: [Qemu-devel] [PATCH 00/17] ppc: preparing pnv landing, Cédric Le Goater, 2016/03/16
- Re: [Qemu-devel] [PATCH 00/17] ppc: preparing pnv landing, David Gibson, 2016/03/16
- Re: [Qemu-devel] [PATCH 00/17] ppc: preparing pnv landing, Cédric Le Goater, 2016/03/17
- Re: [Qemu-devel] [PATCH 00/17] ppc: preparing pnv landing, David Gibson, 2016/03/20