[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 11/17] hw/misc/max111x: Create header file for documentation,
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [PATCH 11/17] hw/misc/max111x: Create header file for documentation, TYPE_ macros |
Date: |
Mon, 29 Jun 2020 10:29:32 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.5.0 |
On 6/28/20 4:24 PM, Peter Maydell wrote:
> Create a header file for the hw/misc/max111x device, in the
> usual modern style for QOM devices:
> * definition of the TYPE_ constants and macros
> * definition of the device's state struct so that it can
> be embedded in other structs if desired
> * documentation of the interface
>
> This allows us to use TYPE_MAX_1111 in the spitz.c code rather
> than the string "max1111".
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> To be honest the main driver here is that I wanted a header
> file to put the documentation comment in :-)
> ---
> include/hw/misc/max111x.h | 57 +++++++++++++++++++++++++++++++++++++++
> hw/arm/spitz.c | 3 ++-
> hw/misc/max111x.c | 25 +----------------
> MAINTAINERS | 1 +
> 4 files changed, 61 insertions(+), 25 deletions(-)
> create mode 100644 include/hw/misc/max111x.h
>
> diff --git a/include/hw/misc/max111x.h b/include/hw/misc/max111x.h
> new file mode 100644
> index 00000000000..337ba63d588
> --- /dev/null
> +++ b/include/hw/misc/max111x.h
> @@ -0,0 +1,57 @@
> +/*
> + * Maxim MAX1110/1111 ADC chip emulation.
> + *
> + * Copyright (c) 2006 Openedhand Ltd.
> + * Written by Andrzej Zaborowski <balrog@zabor.org>
> + *
> + * This code is licensed under the GNU GPLv2.
> + *
> + * Contributions after 2012-01-13 are licensed under the terms of the
> + * GNU GPL, version 2 or (at your option) any later version.
> + */
> +
> +#ifndef HW_MISC_MAX111X_H
> +#define HW_MISC_MAX111X_H
> +
> +#include "hw/ssi/ssi.h"
> +#include "hw/irq.h"
"hw/irq.h" not needed as qemu_irq is forward-declared in
"qemu/typedefs.h".
> +
> +/*
> + * This is a model of the Maxim MAX1110/1111 ADC chip, which for QEMU
> + * is an SSI slave device. It has either 4 (max1110) or 8 (max1111)
> + * 8-bit ADC channels.
> + *
> + * QEMU interface:
> + * + GPIO inputs 0..3 (for max1110) or 0..7 (for max1111): set the value
> + * of each ADC input, as an unsigned 8-bit value
> + * + GPIO output 0: interrupt line
> + * + Properties "input0" to "input3" (max1110) or "input0" to "input7"
> + * (max1111): initial reset values for ADC inputs.
> + *
> + * Known bugs:
> + * + the interrupt line is not correctly implemented, and will never
> + * be lowered once it has been asserted.
> + */
> +typedef struct {
> + SSISlave parent_obj;
> +
> + qemu_irq interrupt;
> + /* Values of inputs at system reset (settable by QOM property) */
> + uint8_t reset_input[8];
> +
> + uint8_t tb1, rb2, rb3;
> + int cycle;
> +
> + uint8_t input[8];
> + int inputs, com;
> +} MAX111xState;
> +
> +#define TYPE_MAX_111X "max111x"
> +
> +#define MAX_111X(obj) \
> + OBJECT_CHECK(MAX111xState, (obj), TYPE_MAX_111X)
Nitpick, we can keep MAX_111X() + MAX111xState in "hw/misc/max111x.c"
until we get a consumer.
> +
> +#define TYPE_MAX_1110 "max1110"
> +#define TYPE_MAX_1111 "max1111"
> +
> +#endif
> diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c
> index fa592aad6d6..1400a56729d 100644
> --- a/hw/arm/spitz.c
> +++ b/hw/arm/spitz.c
> @@ -29,6 +29,7 @@
> #include "audio/audio.h"
> #include "hw/boards.h"
> #include "hw/sysbus.h"
> +#include "hw/misc/max111x.h"
> #include "migration/vmstate.h"
> #include "exec/address-spaces.h"
> #include "cpu.h"
> @@ -732,7 +733,7 @@ static void spitz_ssp_attach(SpitzMachineState *sms)
> qdev_get_gpio_in(sms->mpu->gpio,
> SPITZ_GPIO_TP_INT));
>
> bus = qdev_get_child_bus(sms->mux, "ssi2");
> - sms->max1111 = qdev_new("max1111");
> + sms->max1111 = qdev_new(TYPE_MAX_1111);
> max1111 = sms->max1111;
> qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */,
> SPITZ_BATTERY_VOLT);
> diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c
> index 3a5cb838445..d41cfd92a8d 100644
> --- a/hw/misc/max111x.c
> +++ b/hw/misc/max111x.c
> @@ -11,34 +11,11 @@
> */
>
> #include "qemu/osdep.h"
> -#include "hw/irq.h"
You still need "hw/irq.h" for qemu_irq_raise().
> -#include "hw/ssi/ssi.h"
> +#include "hw/misc/max111x.h"
> #include "migration/vmstate.h"
> #include "qemu/module.h"
> #include "hw/qdev-properties.h"
>
> -typedef struct {
> - SSISlave parent_obj;
> -
> - qemu_irq interrupt;
> - /* Values of inputs at system reset (settable by QOM property) */
> - uint8_t reset_input[8];
> -
> - uint8_t tb1, rb2, rb3;
> - int cycle;
> -
> - uint8_t input[8];
> - int inputs, com;
> -} MAX111xState;
> -
> -#define TYPE_MAX_111X "max111x"
> -
> -#define MAX_111X(obj) \
> - OBJECT_CHECK(MAX111xState, (obj), TYPE_MAX_111X)
> -
> -#define TYPE_MAX_1110 "max1110"
> -#define TYPE_MAX_1111 "max1111"
> -
> /* Control-byte bitfields */
> #define CB_PD0 (1 << 0)
> #define CB_PD1 (1 << 1)
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1b40446c739..550844d1514 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -787,6 +787,7 @@ F: hw/gpio/max7310.c
> F: hw/gpio/zaurus.c
> F: hw/misc/mst_fpga.c
> F: hw/misc/max111x.c
> +F: include/hw/misc/max111x.h
> F: include/hw/arm/pxa.h
> F: include/hw/arm/sharpsl.h
> F: include/hw/display/tc6393xb.h
>
- Re: [PATCH 05/17] hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals, (continued)
- [PATCH 08/17] ssi: Add ssi_realize_and_unref(), Peter Maydell, 2020/06/28
- [PATCH 09/17] hw/arm/spitz: Use max111x properties to set initial values, Peter Maydell, 2020/06/28
- [PATCH 10/17] hw/misc/max111x: Use GPIO lines rather than max111x_set_input(), Peter Maydell, 2020/06/28
- [PATCH 11/17] hw/misc/max111x: Create header file for documentation, TYPE_ macros, Peter Maydell, 2020/06/28
- Re: [PATCH 11/17] hw/misc/max111x: Create header file for documentation, TYPE_ macros,
Philippe Mathieu-Daudé <=
- [PATCH 12/17] hw/arm/spitz: Encapsulate misc GPIO handling in a device, Peter Maydell, 2020/06/28
- [PATCH 13/17] hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses, Peter Maydell, 2020/06/28
- [PATCH 14/17] hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses, Peter Maydell, 2020/06/28