[PATCH v8 29/43] mirror: Deal with filters

[Max Reitz]

This includes some permission limiting (for example, we only need to
take the RESIZE permission for active commits where the base is smaller
than the top).

base_overlay is introduced so we can query bdrv_is_allocated_above() on
it - we cannot do that with base itself, because a filter's block_status
is the same as its child node, so if there are filters on base,
bdrv_is_allocated_above() on base would return information including
base.

Use this opportunity to rename qmp_drive_mirror()'s "source" BDS to
"target_backing_bs", because that is what it really refers to.

Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 qapi/block-core.json |   6 ++-
 block/mirror.c       | 118 +++++++++++++++++++++++++++++++++----------
 blockdev.c           |  32 ++++++++----
 3 files changed, 118 insertions(+), 38 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index f8f42cc836..8d180b584c 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1948,7 +1948,8 @@
 #
 # @replaces: with sync=full graph node name to be replaced by the new
 #            image when a whole image copy is done. This can be used to repair
-#            broken Quorum files. (Since 2.1)
+#            broken Quorum files.  By default, @device is replaced, although
+#            implicitly created filters on it are kept. (Since 2.1)
 #
 # @mode: whether and how QEMU should create a new image, default is
 #        'absolute-paths'.
@@ -2259,7 +2260,8 @@
 #
 # @replaces: with sync=full graph node name to be replaced by the new
 #            image when a whole image copy is done. This can be used to repair
-#            broken Quorum files.
+#            broken Quorum files.  By default, @device is replaced, although
+#            implicitly created filters on it are kept.
 #
 # @speed:  the maximum speed, in bytes per second
 #
diff --git a/block/mirror.c b/block/mirror.c
index e8e8844afc..f16b0d62bc 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -42,6 +42,7 @@ typedef struct MirrorBlockJob {
     BlockBackend *target;
     BlockDriverState *mirror_top_bs;
     BlockDriverState *base;
+    BlockDriverState *base_overlay;
 
     /* The name of the graph node to replace */
     char *replaces;
@@ -677,8 +678,10 @@ static int mirror_exit_common(Job *job)
                              &error_abort);
     if (!abort && s->backing_mode == MIRROR_SOURCE_BACKING_CHAIN) {
         BlockDriverState *backing = s->is_none_mode ? src : s->base;
-        if (backing_bs(target_bs) != backing) {
-            bdrv_set_backing_hd(target_bs, backing, &local_err);
+        BlockDriverState *unfiltered_target = bdrv_skip_filters(target_bs);
+
+        if (bdrv_cow_bs(unfiltered_target) != backing) {
+            bdrv_set_backing_hd(unfiltered_target, backing, &local_err);
             if (local_err) {
                 error_report_err(local_err);
                 local_err = NULL;
@@ -740,7 +743,7 @@ static int mirror_exit_common(Job *job)
      * valid.
      */
     block_job_remove_all_bdrv(bjob);
-    bdrv_replace_node(mirror_top_bs, backing_bs(mirror_top_bs), &error_abort);
+    bdrv_replace_node(mirror_top_bs, mirror_top_bs->backing->bs, &error_abort);
 
     /* We just changed the BDS the job BB refers to (with either or both of the
      * bdrv_replace_node() calls), so switch the BB back so the cleanup does
@@ -786,7 +789,6 @@ static void coroutine_fn mirror_throttle(MirrorBlockJob *s)
 static int coroutine_fn mirror_dirty_init(MirrorBlockJob *s)
 {
     int64_t offset;
-    BlockDriverState *base = s->base;
     BlockDriverState *bs = s->mirror_top_bs->backing->bs;
     BlockDriverState *target_bs = blk_bs(s->target);
     int ret;
@@ -837,7 +839,8 @@ static int coroutine_fn mirror_dirty_init(MirrorBlockJob *s)
             return 0;
         }
 
-        ret = bdrv_is_allocated_above(bs, base, false, offset, bytes, &count);
+        ret = bdrv_is_allocated_above(bs, s->base_overlay, true, offset, bytes,
+                                      &count);
         if (ret < 0) {
             return ret;
         }
@@ -936,7 +939,7 @@ static int coroutine_fn mirror_run(Job *job, Error **errp)
     } else {
         s->target_cluster_size = BDRV_SECTOR_SIZE;
     }
-    if (backing_filename[0] && !target_bs->backing &&
+    if (backing_filename[0] && !bdrv_backing_chain_next(target_bs) &&
         s->granularity < s->target_cluster_size) {
         s->buf_size = MAX(s->buf_size, s->target_cluster_size);
         s->cow_bitmap = bitmap_new(length);
@@ -1116,8 +1119,9 @@ static void mirror_complete(Job *job, Error **errp)
     if (s->backing_mode == MIRROR_OPEN_BACKING_CHAIN) {
         int ret;
 
-        assert(!target->backing);
-        ret = bdrv_open_backing_file(target, NULL, "backing", errp);
+        assert(!bdrv_backing_chain_next(target));
+        ret = bdrv_open_backing_file(bdrv_skip_filters(target), NULL,
+                                     "backing", errp);
         if (ret < 0) {
             return;
         }
@@ -1555,8 +1559,8 @@ static BlockJob *mirror_start_job(
     MirrorBlockJob *s;
     MirrorBDSOpaque *bs_opaque;
     BlockDriverState *mirror_top_bs;
-    bool target_graph_mod;
     bool target_is_backing;
+    uint64_t target_perms, target_shared_perms;
     Error *local_err = NULL;
     int ret;
 
@@ -1575,7 +1579,7 @@ static BlockJob *mirror_start_job(
         buf_size = DEFAULT_MIRROR_BUF_SIZE;
     }
 
-    if (bs == target) {
+    if (bdrv_skip_filters(bs) == bdrv_skip_filters(target)) {
         error_setg(errp, "Can't mirror node into itself");
         return NULL;
     }
@@ -1639,15 +1643,50 @@ static BlockJob *mirror_start_job(
      * In the case of active commit, things look a bit different, though,
      * because the target is an already populated backing file in active use.
      * We can allow anything except resize there.*/
+
+    target_perms = BLK_PERM_WRITE;
+    target_shared_perms = BLK_PERM_WRITE_UNCHANGED;
+
     target_is_backing = bdrv_chain_contains(bs, target);
-    target_graph_mod = (backing_mode != MIRROR_LEAVE_BACKING_CHAIN);
+    if (target_is_backing) {
+        int64_t bs_size, target_size;
+        bs_size = bdrv_getlength(bs);
+        if (bs_size < 0) {
+            error_setg_errno(errp, -bs_size,
+                             "Could not inquire top image size");
+            goto fail;
+        }
+
+        target_size = bdrv_getlength(target);
+        if (target_size < 0) {
+            error_setg_errno(errp, -target_size,
+                             "Could not inquire base image size");
+            goto fail;
+        }
+
+        if (target_size < bs_size) {
+            target_perms |= BLK_PERM_RESIZE;
+        }
+
+        target_shared_perms |= BLK_PERM_CONSISTENT_READ
+                            |  BLK_PERM_WRITE
+                            |  BLK_PERM_GRAPH_MOD;
+    } else if (bdrv_chain_contains(bs, bdrv_skip_filters(target))) {
+        /*
+         * We may want to allow this in the future, but it would
+         * require taking some extra care.
+         */
+        error_setg(errp, "Cannot mirror to a filter on top of a node in the "
+                   "source's backing chain");
+        goto fail;
+    }
+
+    if (backing_mode != MIRROR_LEAVE_BACKING_CHAIN) {
+        target_perms |= BLK_PERM_GRAPH_MOD;
+    }
+
     s->target = blk_new(s->common.job.aio_context,
-                        BLK_PERM_WRITE | BLK_PERM_RESIZE |
-                        (target_graph_mod ? BLK_PERM_GRAPH_MOD : 0),
-                        BLK_PERM_WRITE_UNCHANGED |
-                        (target_is_backing ? BLK_PERM_CONSISTENT_READ |
-                                             BLK_PERM_WRITE |
-                                             BLK_PERM_GRAPH_MOD : 0));
+                        target_perms, target_shared_perms);
     ret = blk_insert_bs(s->target, target, errp);
     if (ret < 0) {
         goto fail;
@@ -1672,6 +1711,7 @@ static BlockJob *mirror_start_job(
     s->zero_target = zero_target;
     s->copy_mode = copy_mode;
     s->base = base;
+    s->base_overlay = bdrv_find_overlay(bs, base);
     s->granularity = granularity;
     s->buf_size = ROUND_UP(buf_size, granularity);
     s->unmap = unmap;
@@ -1702,15 +1742,39 @@ static BlockJob *mirror_start_job(
     /* In commit_active_start() all intermediate nodes disappear, so
      * any jobs in them must be blocked */
     if (target_is_backing) {
-        BlockDriverState *iter;
-        for (iter = backing_bs(bs); iter != target; iter = backing_bs(iter)) {
-            /* XXX BLK_PERM_WRITE needs to be allowed so we don't block
-             * ourselves at s->base (if writes are blocked for a node, they are
-             * also blocked for its backing file). The other options would be a
-             * second filter driver above s->base (== target). */
+        BlockDriverState *iter, *filtered_target;
+        uint64_t iter_shared_perms;
+
+        /*
+         * The topmost node with
+         * bdrv_skip_filters(filtered_target) == bdrv_skip_filters(target)
+         */
+        filtered_target = bdrv_cow_bs(bdrv_find_overlay(bs, target));
+
+        assert(bdrv_skip_filters(filtered_target) ==
+               bdrv_skip_filters(target));
+
+        /*
+         * XXX BLK_PERM_WRITE needs to be allowed so we don't block
+         * ourselves at s->base (if writes are blocked for a node, they are
+         * also blocked for its backing file). The other options would be a
+         * second filter driver above s->base (== target).
+         */
+        iter_shared_perms = BLK_PERM_WRITE_UNCHANGED | BLK_PERM_WRITE;
+
+        for (iter = bdrv_filter_or_cow_bs(bs); iter != target;
+             iter = bdrv_filter_or_cow_bs(iter))
+        {
+            if (iter == filtered_target) {
+                /*
+                 * From here on, all nodes are filters on the base.
+                 * This allows us to share BLK_PERM_CONSISTENT_READ.
+                 */
+                iter_shared_perms |= BLK_PERM_CONSISTENT_READ;
+            }
+
             ret = block_job_add_bdrv(&s->common, "intermediate node", iter, 0,
-                                     BLK_PERM_WRITE_UNCHANGED | BLK_PERM_WRITE,
-                                     errp);
+                                     iter_shared_perms, errp);
             if (ret < 0) {
                 goto fail;
             }
@@ -1746,7 +1810,7 @@ fail:
     bs_opaque->stop = true;
     bdrv_child_refresh_perms(mirror_top_bs, mirror_top_bs->backing,
                              &error_abort);
-    bdrv_replace_node(mirror_top_bs, backing_bs(mirror_top_bs), &error_abort);
+    bdrv_replace_node(mirror_top_bs, mirror_top_bs->backing->bs, &error_abort);
 
     bdrv_unref(mirror_top_bs);
 
@@ -1774,7 +1838,7 @@ void mirror_start(const char *job_id, BlockDriverState 
*bs,
         return;
     }
     is_none_mode = mode == MIRROR_SYNC_MODE_NONE;
-    base = mode == MIRROR_SYNC_MODE_TOP ? backing_bs(bs) : NULL;
+    base = mode == MIRROR_SYNC_MODE_TOP ? bdrv_backing_chain_next(bs) : NULL;
     mirror_start_job(job_id, bs, creation_flags, target, replaces,
                      speed, granularity, buf_size, backing_mode, zero_target,
                      on_source_error, on_target_error, unmap, NULL, NULL,
diff --git a/blockdev.c b/blockdev.c
index 57ee41b73e..73d96ce21c 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2899,6 +2899,7 @@ static void blockdev_mirror_common(const char *job_id, 
BlockDriverState *bs,
                                    bool has_auto_dismiss, bool auto_dismiss,
                                    Error **errp)
 {
+    BlockDriverState *unfiltered_bs;
     int job_flags = JOB_DEFAULT;
 
     if (!has_speed) {
@@ -2950,10 +2951,19 @@ static void blockdev_mirror_common(const char *job_id, 
BlockDriverState *bs,
         return;
     }
 
-    if (!bs->backing && sync == MIRROR_SYNC_MODE_TOP) {
+    if (!bdrv_backing_chain_next(bs) && sync == MIRROR_SYNC_MODE_TOP) {
         sync = MIRROR_SYNC_MODE_FULL;
     }
 
+    if (!has_replaces) {
+        /* We want to mirror from @bs, but keep implicit filters on top */
+        unfiltered_bs = bdrv_skip_implicit_filters(bs);
+        if (unfiltered_bs != bs) {
+            replaces = unfiltered_bs->node_name;
+            has_replaces = true;
+        }
+    }
+
     if (has_replaces) {
         BlockDriverState *to_replace_bs;
         AioContext *replace_aio_context;
@@ -3000,7 +3010,7 @@ static void blockdev_mirror_common(const char *job_id, 
BlockDriverState *bs,
 void qmp_drive_mirror(DriveMirror *arg, Error **errp)
 {
     BlockDriverState *bs;
-    BlockDriverState *source, *target_bs;
+    BlockDriverState *target_backing_bs, *target_bs;
     AioContext *aio_context;
     AioContext *old_context;
     BlockMirrorBackingMode backing_mode;
@@ -3035,12 +3045,12 @@ void qmp_drive_mirror(DriveMirror *arg, Error **errp)
     }
 
     flags = bs->open_flags | BDRV_O_RDWR;
-    source = backing_bs(bs);
-    if (!source && arg->sync == MIRROR_SYNC_MODE_TOP) {
+    target_backing_bs = bdrv_cow_bs(bdrv_skip_filters(bs));
+    if (!target_backing_bs && arg->sync == MIRROR_SYNC_MODE_TOP) {
         arg->sync = MIRROR_SYNC_MODE_FULL;
     }
     if (arg->sync == MIRROR_SYNC_MODE_NONE) {
-        source = bs;
+        target_backing_bs = bs;
     }
 
     size = bdrv_getlength(bs);
@@ -3066,7 +3076,7 @@ void qmp_drive_mirror(DriveMirror *arg, Error **errp)
     /* Don't open backing image in create() */
     flags |= BDRV_O_NO_BACKING;
 
-    if ((arg->sync == MIRROR_SYNC_MODE_FULL || !source)
+    if ((arg->sync == MIRROR_SYNC_MODE_FULL || !target_backing_bs)
         && arg->mode != NEW_IMAGE_MODE_EXISTING)
     {
         /* create new image w/o backing file */
@@ -3074,15 +3084,19 @@ void qmp_drive_mirror(DriveMirror *arg, Error **errp)
         bdrv_img_create(arg->target, format,
                         NULL, NULL, NULL, size, flags, false, &local_err);
     } else {
+        /* Implicit filters should not appear in the filename */
+        BlockDriverState *explicit_backing =
+            bdrv_skip_implicit_filters(target_backing_bs);
+
         switch (arg->mode) {
         case NEW_IMAGE_MODE_EXISTING:
             break;
         case NEW_IMAGE_MODE_ABSOLUTE_PATHS:
             /* create new image with backing file */
-            bdrv_refresh_filename(source);
+            bdrv_refresh_filename(explicit_backing);
             bdrv_img_create(arg->target, format,
-                            source->filename,
-                            source->drv->format_name,
+                            explicit_backing->filename,
+                            explicit_backing->drv->format_name,
                             NULL, size, flags, false, &local_err);
             break;
         default:
-- 
2.26.2