Re: Problems with irq mapping in qemu v5.2

[Guenter Roeck]

On Thu, Dec 24, 2020 at 02:34:07AM +0100, BALATON Zoltan wrote:
[ ... ]
> 
> If we need legacy mode then we may be able to emulate that by setting BARs
> to legacy ports ignoring what values are written to them if legacy mode
> config is set (which may be what the real chip does) and we already have
> IRQs hard wired to legacy values so that would give us legacy and
> half-native mode which is enough for both fuloong2e and pegasos2 but I'm not
> sure how can we fix BARs in QEMU because that's also handled by generic PCI
> code which I also don't want to break.

The code below works for booting Linux while at the same time not affecting
any other emulation. I don't claim it to be a perfect fix, and overloading
the existing property is a bit hackish, but it does work.

Guenter

---
>From cf2d1d655f3fe4f88dc435a3ac4e1e6b6040d08b Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Wed, 23 Dec 2020 09:12:37 -0800
Subject: [PATCH] via-ide: Fix fuloong2 support

Fuloong2 needs to use legacy mode for IDE support to work with Linux.
Add property to via-ide driver to make the mode configurable, and set
legacy mode for Fuloong2.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 hw/ide/via.c        | 16 ++++++++++++++--
 hw/mips/fuloong2e.c |  4 +++-
 2 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/hw/ide/via.c b/hw/ide/via.c
index be09912b33..9e55e717e8 100644
--- a/hw/ide/via.c
+++ b/hw/ide/via.c
@@ -26,6 +26,7 @@
 
 #include "qemu/osdep.h"
 #include "hw/pci/pci.h"
+#include "hw/qdev-properties.h"
 #include "migration/vmstate.h"
 #include "qemu/module.h"
 #include "sysemu/dma.h"
@@ -185,12 +186,17 @@ static void via_ide_realize(PCIDevice *dev, Error **errp)
                           &d->bus[1], "via-ide1-cmd", 4);
     pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[1]);
 
-    bmdma_setup_bar(d);
-    pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
+    if (!d->secondary) {
+        bmdma_setup_bar(d);
+        pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
+    }
 
     qdev_init_gpio_in(ds, via_ide_set_irq, 2);
     for (i = 0; i < 2; i++) {
         ide_bus_new(&d->bus[i], sizeof(d->bus[i]), ds, i, 2);
+        if (d->secondary) {
+            ide_init_ioport(&d->bus[i], NULL, i ? 0x170 : 0x1f0, i ? 0x376 : 
0x3f6);
+        }
         ide_init2(&d->bus[i], qdev_get_gpio_in(ds, i));
 
         bmdma_init(&d->bus[i], &d->bmdma[i], d);
@@ -210,6 +216,11 @@ static void via_ide_exitfn(PCIDevice *dev)
     }
 }
 
+static Property via_ide_properties[] = {
+    DEFINE_PROP_UINT32("legacy_mode", PCIIDEState, secondary, 0), /* hijacked 
*/
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void via_ide_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -223,6 +234,7 @@ static void via_ide_class_init(ObjectClass *klass, void 
*data)
     k->device_id = PCI_DEVICE_ID_VIA_IDE;
     k->revision = 0x06;
     k->class_id = PCI_CLASS_STORAGE_IDE;
+    device_class_set_props(dc, via_ide_properties);
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
 }
 
diff --git a/hw/mips/fuloong2e.c b/hw/mips/fuloong2e.c
index 23c526c69d..d0398d6266 100644
--- a/hw/mips/fuloong2e.c
+++ b/hw/mips/fuloong2e.c
@@ -245,7 +245,9 @@ static void vt82c686b_southbridge_init(PCIBus *pci_bus, int 
slot, qemu_irq intc,
     /* Super I/O */
     isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
 
-    dev = pci_create_simple(pci_bus, PCI_DEVFN(slot, 1), "via-ide");
+    dev = pci_new(PCI_DEVFN(slot, 1), "via-ide");
+    qdev_prop_set_uint32(&dev->qdev, "legacy_mode", 1);
+    pci_realize_and_unref(dev, pci_bus, &error_fatal);
     pci_ide_create_devs(dev);
 
     pci_create_simple(pci_bus, PCI_DEVFN(slot, 2), "vt82c686b-usb-uhci");
-- 
2.17.1