Re: [Taler] Getting Some more Info for GSOC 2020

[Wayne Taylor]

This might be true that I can connect with Matrix, and I feel like I
remember trying this once and succeeding but now I can't find on my
matrix list.

I tried to search `#Taler` in Matrix and nothing there for groups.  Must
be via a IRC bridge or something?

Also, i went to https://taler.net/en/contact.html and I don't see any of
this - just mailing lists and emails.

I guess for now, if you could explain how I can connect with Matrix that
would be great. 

..But then again, it probably makes more sense to put the instructions
on the contact page so you don't have to repeat to me in six months when
I forget again or others who might want to connect? :)

Totally fine about Telegram.  Matrix is great.

Thanks!

On 2020-03-21 1:32 a.m., Christian Grothoff wrote:
> We do have #taler on irc.freenode.net, which is also available via
> Matrix already (several people are logged in via Matrix).
>
> Telegram is non-free, so GNU packages should not use it.
>
> On 3/20/20 11:55 PM, Wayne Taylor wrote:
>> would any one be angry if I started a Telegram or Matrix chat group for
>> Taler?  These are the two places where most open software stuff lives. 
>> I think it would create a quicker 'buzz' around the project too.
>>
>> I don't want to ruffle feathers but I think this will be nothing but
>> good for the project...
>>
>> Otherwise, if someone overseeing the project wants to do it, that's also
>> awesome - I will join :)
>>
>> Wayne
>>
>> On 2020-03-20 2:35 p.m., Jainal Gosaliya wrote:
>>> Hi;
>>> Sir any updates?
>>> please let me know.
>>> As proposal Dates are closing in!
>>>
>>> Regards;
>>> Jainal Gosaliya
>>>
>>>
>>> On Fri, Mar 20, 2020 at 3:47 AM Jainal Gosaliya
>>> <address@hidden <mailto:address@hidden>> wrote:
>>>
>>>     Hi,
>>>     Just following you on my Previous email and requesting you about
>>>     the info about the Previous email.
>>>
>>>     Also I started working with Taler Integration and I was facing
>>>     this problem while trying out the demos. When I click on Start
>>>     withdraw :
>>>     image.png
>>>
>>>     It Gives me this error.
>>>
>>>     image.png
>>>
>>>     Even Chose different exchange provider also throws same error.
>>>
>>>     Please guide me what to do next.
>>>
>>>     Regards,
>>>     Jainal Gosaliya
>>>
>>>     On Thu, Mar 19, 2020 at 1:35 AM Jainal Gosaliya
>>>     <address@hidden <mailto:address@hidden>> wrote:
>>>
>>>         Hi,
>>>
>>>         Thank you for your response. 
>>>         With all due respect ,
>>>         like other organisations having a Slack or any other kinds of
>>>         work spaces or groups, participants can discuss their proposal
>>>         ideas with mentors efficiently. So having such work space and
>>>         groups helps ease communication gaps a lot and lessens the
>>>         time of reply.
>>>         So is there any work space or any group where i can connect
>>>         with you all mentors ?
>>>         If not assuming mailing is the only available method. Can I
>>>         mail you here all my *proposal Ideas* and other questions
>>>         before submitting a final proposal?
>>>         And Also just to let you know, I can also take up an
>>>         Initiative to set up a Slack/Zulip/Discord/Or Any other Work
>>>         space or Group(whichever you propose) for easing our
>>>         Communication throughout GSOC 2020, if you permit . 
>>>
>>>         But I am also okay with any of the methods available.
>>>
>>>         Regards,
>>>         Jainal Gosaliya 
>>>
>>>
>>>
>>>
>>>         On Thu, Mar 19, 2020 at 12:24 AM Shivam kohli
>>>         <address@hidden <mailto:address@hidden>> wrote:
>>>
>>>             Hi Satyam,
>>>
>>>             Thank you for showing interest in the project "*Integrate
>>>             GNU Taler payments with the Pretix ticketing system*"
>>>             There is no previous work done on this project. 
>>>             A large part of your selection depends on your proposal so
>>>             I would advise you to start working on the proposal. 
>>>             address@hidden <mailto:address@hidden> is the mailing list
>>>             that we use. You can reach out if you have any questions.
>>>
>>>             Regards,
>>>             Shivam Kohli
>>>
>>>
>>>             On Wed, 18 Mar 2020 at 02:45, Jainal Gosaliya
>>>             <address@hidden
>>>             <mailto:address@hidden>> wrote:
>>>
>>>                 Hi,
>>>                 I am aspiring GSOC 2020 participant.
>>>                 I am Interested in this Idea:
>>>                 "*Integrate GNU Taler payments with the
>>>                 Pretix ticketing system*"
>>>                 I wanted to know if there is any existing work done on
>>>                 this idea,
>>>                 If anyone has already created any Pull request
>>>                 Or is this idea still open for contributing for GSOC 2020.
>>>
>>>                 Also what are the key requirements for getting
>>>                 selected for this Idea that I need to fulfil like
>>>                 Creating a Pull Request Before Writing my proposal,
>>>                 some key requirements for the proposal etc.
>>>
>>>                 Also I wanted to know is there any Slack/IRC/Gitter
>>>                 /Zulip or any-other Work space for group communication.
>>>
>>>                 Regards,
>>>                 Jainal Gosaliya
>>>
>>>                 -- 
>>>                 *Jainal Gosaliya.*
>>>                 ABOUT ME
>>>                 
>>> <https://signtr.info/tracker/click?redirect=http%3A%2F%2Fjainal-portfolio.github.io&dID=1584477345060&linkName=ABOUT%20ME>*
>>>  *-
>>>                 My Website
>>>
>>>
>>>
>>>         -- 
>>>         *Jainal Gosaliya.*
>>>         ABOUT ME <http://jainal-portfolio.github.io>* *- My Website
>>>
>>>
>>>
>>>     -- 
>>>     *Jainal Gosaliya.*
>>>     ABOUT ME <http://jainal-portfolio.github.io>* *- My Website
>>>
>>>
>>>
>>> -- 
>>> *Jainal Gosaliya.*
>>> ABOUT ME <http://jainal-portfolio.github.io>* *- My Website