RE: [avrdude-dev] Verify errors,

[Daniel Williamson]

Just to let you lot know, I've now gone through about 50 program cycles with
no errors.

Below is my usual programming result

avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x1e9702
avrdude: erasing chip
avrdude: current erase-rewrite cycle count is -29697 (if being tracked)
avrdude: done.
avrdude: reading input file "5003.hex"
avrdude: input file 5003.hex auto detected as Intel Hex
avrdude: writing flash (32174 bytes):
avrdude: |0%               100%|
avrdude: |#####################|
avrdude: 32174 bytes of flash written
avrdude: verifying flash memory against 5003.hex:
avrdude: reading on-chip flash data:
avrdude: |0%               100%|
avrdude: |#####################|
avrdude: verifying ...
avrdude: 32174 bytes of flash verified

avrdude: done. elapsed time: 28 sec

Good job well done!

Dan.