[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [certi-dev] Question about NextEventRequest Service
From: |
Eric Noulard |
Subject: |
Re: [certi-dev] Question about NextEventRequest Service |
Date: |
Tue, 2 Nov 2010 17:00:54 +0100 |
2010/11/2 Roth, Christoph <address@hidden>:
> Hi Eric,
>
> I tried
>
> cmake -DMAKE_INSTALL_PREFIX=/home/roth/certi-3.4.0
> -DCERTI_USE_NULL_PRIME_MESSAGE_PROTOCOL=ON ../CERTI-3.4.0cvs-Source
>
> as well as
>
> cmake -DMAKE_INSTALL_PREFIX=/home/roth/certi-3.4.0
> -DNULL_PRIME_MESSAGE_PROTOCOL=ON ../CERTI-3.4.0cvs-Source
>
> but the behavior is the same. The tick2 function still has a delay of several
> seconds if the NMR parameter has a high value.
>
> Both parameters are also not visible in the cmake gui? Are they correct?
The parameter is:
CERTI_USE_NULL_PRIME_MESSAGE_PROTOCOL
it is at line 73 of certi/CMakeLists.txt (of current CERTI cvs version)
you should see it in the CMake GUI.
ar e you sure you have an up to date CERTI cvs tree?
--
Erk
Membre de l'April - « promouvoir et défendre le logiciel libre » -
http://www.april.org
- AW: [certi-dev] Question about NextEventRequest Service, Roth, Christoph, 2010/11/02
- AW: [certi-dev] Question about NextEventRequest Service, Roth, Christoph, 2010/11/02
- AW: [certi-dev] Question about NextEventRequest Service, Roth, Christoph, 2010/11/02
- Re: [certi-dev] Question about NextEventRequest Service,
Eric Noulard <=
- AW: [certi-dev] Question about NextEventRequest Service, Roth, Christoph, 2010/11/02
- Re: [certi-dev] Question about NextEventRequest Service, Eric Noulard, 2010/11/02
- AW: [certi-dev] Question about NextEventRequest Service, Roth, Christoph, 2010/11/03
- Re: [certi-dev] Question about NextEventRequest Service, Eric Noulard, 2010/11/03
- AW: [certi-dev] Question about NextEventRequest Service, Roth, Christoph, 2010/11/04