duplicity-talk
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Duplicity-talk] Duplicity using 1.5 TB storage and loosing incremen


From: Remy van Elst
Subject: Re: [Duplicity-talk] Duplicity using 1.5 TB storage and loosing incremental backups?
Date: Fri, 29 May 2015 12:44:05 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256



On 05/29/2015 12:35 PM, address@hidden wrote:
> On 29.05.2015 04:41, Remy van Elst wrote:
>> 
>> 
>> On 05/29/2015 12:25 AM, address@hidden wrote:
>>> please do not top post if the answer was posted at the bottom..
>>> i will continue below
>> 
>>> On 28.05.2015 19:47, Remy van Elst wrote:
>>>> Here's the first 31000 lines of the log: 
>>>> https://e75f5515c4f249ffa1122853af811b3e.objectstore.eu/duplicity/d
up
>>
>>>> 
lic
>>>> 
>>>> 
>> ity.txt
>>>> 
>>>> After these, it is all lines comparing the files on the
>>>> machine. That is still running. Is this helpfull?
>>>> 
>>>> On 05/28/2015 03:54 PM, address@hidden wrote:
>>>>> On 28.05.2015 15:28, Remy van Elst wrote:
>>>>>> Any suggestions or other help?
>>>>>> 
>>>>>> On 05/25/2015 11:04 AM, Remy van Elst wrote:
>>>>>>> Duplicity seems to loose it's status when trying to do
>>>>>>> a incremental backup set over 14 days. The backup has
>>>>>>> been running for a while now but it is using about 1.5
>>>>>>> TB of backend storage since 2 weeks. It is going to an
>>>>>>> Openstack swift object store as backend.
>>>>>> 
>>>>>>> This is the command line:
>>>>>> 
>>>>>>> duplicity --asynchronous-upload --verbosity 9
>>>>>>> --log-file /var/log/duplicity.log --volsize 25
>>>>>>> --tempdir="/tmp" 
>>>>>>> --file-prefix="vps1.sparklingclouds.nl." 
>>>>>>> --name="vps1.sparklingclouds.nl."
>>>>>>> --exclude-device-files 
>>>>>>> --exclude-globbing-filelist=/etc/duplicity-backup/exclude.conf
>>>>>>>
>>>>>>>
>>
>>>>>>> 
- --full-if-older-than="14D" --no-encryption  /
>>>>>>> swift://duplicity-backup
>>>>>> 
>>>>>>> This is what caught my eye in the verbose log file:
>>>>>> 
>>>>>>> File 
>>>>>>> vps1.sparklingclouds.nl.duplicity-full.20150430T034939Z.vol166.d
if
>>
>>>>>>> 
ft
>>>> 
>>>>>>> 
>> ar
>>>>>> 
>>>>>>> 
>>>> .g
>>>>>> 
>>>>>> 
>>>>>> z
>>>>>>> is part of known set File 
>>>>>>> vps1.sparklingclouds.nl.duplicity-full.20150430T034939Z.vol1660.
di
>>
>>>>>>> 
ff
>>>> 
>>>>>>> 
>> ta
>>>>>> 
>>>>>>> 
>>>> r.
>>>>>> 
>>>>>> 
>>>>>> gz
>>>>>>> is part of known set Found backup chain [Tue Mar 24 
>>>>>>> 14:42:44 2015]-[Tue Mar 24 14:42:44 2015] Last full
>>>>>>> backup is too old, forcing full backup
>>>>>> 
>>>>>> 
>>>>>>> The last full backup is from yesterday, and it should
>>>>>>> only do a full backup every 14 days.
>>>>>> 
>>>>>>> When I do a collection status it seems all the
>>>>>>> incremental backups are gone:
>>>>>> 
>>>>>>> Do note that I've got a wrapper script around
>>>>>>> duplicity which outputs the status, storage used and
>>>>>>> config settings:
>>>>>> 
>>>>>> 
>>>>>>> # Hostname: vps1.sparklingclouds.nl # IP: 192.0.2.10 # 
>>>>>>> Storage used: 1.5T # Full backups to keep: 4 # Create
>>>>>>> full backup if last full backup is older than: 14D 
>>>>>>> ----------------------------------------- # Duplicity 
>>>>>>> collection status: # Local and Remote metadata are 
>>>>>>> synchronized, no sync needed. # Last full backup date:
>>>>>>> Mon May 25 10:48:16 2015 # Collection Status # 
>>>>>>> ----------------- # Connecting with backend:
>>>>>>> BackendWrapper # Archive dir: 
>>>>>>> /root/.cache/duplicity/vps1.sparklingclouds.nl. # Found
>>>>>>> 4 secondary backup chains. # Secondary chain 1 of 4: #
>>>>>>>  ------------------------- # Chain start time: Tue Mar
>>>>>>> 24 14:42:44 2015 # Chain end time: Tue Mar 24 14:42:44
>>>>>>> 2015 # Number of contained backup sets: 1 # Total
>>>>>>> number of contained volumes: 3009 #  Type of backup
>>>>>>> set: Time: Num volumes: #                 Full
>>>>>>> Tue Mar 24 14:42:44 2015 3009 #
>>>>>>> ------------------------- # Secondary chain 2 of 4: #
>>>>>>> ------------------------- # Chain start time: Wed Apr
>>>>>>> 8 05:49:18 2015 # Chain end time: Wed Apr  8 05:49:18
>>>>>>> 2015 # Number of contained backup sets: 1 # Total 
>>>>>>> number of contained volumes: 3104 #  Type of backup
>>>>>>> set: Time:      Num volumes: #                 Full
>>>>>>> Wed Apr 8 05:49:18 2015 3104 #
>>>>>>> ------------------------- # Secondary chain 3 of 4: #
>>>>>>> ------------------------- # Chain start time: Thu Apr
>>>>>>> 16 05:49:37 2015 # Chain end time: Thu Apr 16 05:49:37
>>>>>>> 2015 # Number of contained backup sets: 1 # Total
>>>>>>> number of contained volumes: 3128 #  Type of backup 
>>>>>>> set: Time:      Num volumes: #                 Full Thu
>>>>>>> Apr 16 05:49:37 2015 3128 # -------------------------
>>>>>>> # Secondary chain 4 of 4: # ------------------------- #
>>>>>>> Chain start time: Thu Apr 30 05:49:39 2015 # Chain end
>>>>>>> time: Thu Apr 30 05:49:39 2015 # Number of contained
>>>>>>> backup sets: 1 # Total number of contained volumes: 736
>>>>>>> # Type of backup set: Time:      Num volumes: #
>>>>>>> Full Thu Apr 30 05:49:39 2015 736 #
>>>>>>> ------------------------- # Found primary backup chain
>>>>>>> with matching signature chain: #
>>>>>>> ------------------------- # Chain start time: Mon May
>>>>>>> 25 10:48:16 2015 # Chain end time: Mon May 25 10:48:16
>>>>>>> 2015 # Number of contained backup sets: 1 # Total
>>>>>>> number of contained volumes: 0 #  Type of backup set:
>>>>>>> Time:      Num volumes: # ------------------------- #
>>>>>>> No orphaned or incomplete backup sets found.
>>>>>> 
>>>>>> 
>>>>>>> Why does this happen and how can I get this back to 
>>>>>>> normal?
>>>>>> 
>>>> 
>>>>> which duplicity version?
>>>> 
>>>>> please post (zip attach)or pastebin the complete console
>>>>> output of a max.verbosity '-v9' status run. obfuscate
>>>>> strings in it you deem private.
>>>> 
>>>>> ..ede/duply.net
>>>> 
>> 
>>> the log states
>> 
>>> --> DEBUG 1 . Found backup chain [Tue Mar 24 14:42:44
>>> 2015]-[Tue Mar 24 14:42:44 2015]
>> 
>>> DEBUG 1 . Found backup chain [Wed Apr  8 05:49:18 2015]-[Wed
>>> Apr  8 05:49:18 2015]
>> 
>>> DEBUG 1 . Found backup chain [Thu Apr 16 05:49:37 2015]-[Thu
>>> Apr 16 05:49:37 2015]
>> 
>>> DEBUG 1 . Found backup chain [Thu Apr 30 05:49:39 2015]-[Thu
>>> Apr 30 05:49:39 2015]
>> 
>>> NOTICE 1 . Last full backup date: Thu Apr 30 05:49:39 2015
>> 
>>> NOTICE 1 . Last full backup is too old, forcing full backup
>>> <--
>> 
>>> which sounds reasonable.. there are no incremental backups on
>>> your backend.
>> 
>> There should be. There runs a cronjob every night with the same 
>> command as I ran manually. It runs for about 3 to 5 hours just as
>> now, and then fails. The backend keeps growing in size.
>> 
>> 
> 
> ok, please ensure that your manual full went through via 'status'
> command.
> 

It is not listed in the output of collection-status. Should I still
run the backup again?

> then rerun the same backup cmd line you sent me before and send me
> the output up until the first 'Getting delta of ...' message.
> 
> ..ede/duply.net
> 
> _______________________________________________ Duplicity-talk
> mailing list address@hidden 
> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQEcBAEBCAAGBQJVaEL1AAoJECtnVb0bf4jcbc4IAJPtzBOyjLiu3iw3b0rdKX6D
ET6Ol80E9D3GT2WG7lOUEkI7E4paiN+gv7JFypXSytYXJmEJWjE1E6bAUy6R8ZnN
LLZFTx57JQcrNqjBP6Xo+S8KPN/99OddwKSPUaPT87SfZSFU/H3JilhpV6msWQjE
NOTfW9j7bUWSygrltCyEtDdwYrcZ9MjoluQlhDtD1g1geVclo7+CS2cPRuE2Egl9
FersNRXr92xr7Jqmrv4c3VLV4p9E0OIKSbc6Kdsi1CwConcGGB8LeV7tWLnRlZcQ
mt+DOYTer9Z9w2Z3rqzUSWxVH1V280WilOby9kezBR/3oUkrQXbjCb8UuBGO0j4=
=iza8
-----END PGP SIGNATURE-----

Attachment: 0x1B7F88DC.asc
Description: application/pgp-keys

Attachment: 0x1B7F88DC.asc.sig
Description: PGP signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]