Re: [Freeipmi-devel] Supermicro X7DBR-3 CPU Temperatur Sensors

[Albert Chu]

Hi Werner,

Can you show me the output of ipmi-sensors?  This product ID and
manufacturer ID are already handled (I'll document the additional
motheboard though).  Perhaps there is a new OEM sensor that I'm unaware
of.

Or did the user remember to use --interpret-oem-data?  

Al

On Mon, 2011-02-14 at 07:50 -0800, Werner Fischer wrote:
> Hi again,
> 
> the customer just sent me also bmc-info of another system with
> X8DT3-LN4F board - see
> http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3-LN4F.cfm
> 
> The X8DT3-LN4F also lacks output for CPU temperatures. Here is its
> bmc-info:
> 
> Device ID             : 32
> Device Revision       : 1
> Device SDRs           : unsupported
> Firmware Revision     : 2.03
> Device Available      : yes (normal operation)
> IPMI Version          : 2.0
> Sensor Device         : supported
> SDR Repository Device : supported
> SEL Device            : supported
> FRU Inventory Device  : supported
> IPMB Event Receiver   : supported
> IPMB Event Generator  : supported
> Bridge                : unsupported
> Chassis Device        : supported
> Manufacturer ID       : Super Micro Computer Inc. (47488)
> Product ID            : 43707
> Auxiliary Firmware Revision Information : 00000001h
> 
> GUID : 00000000-0000-0000-0000-000000434D53
> 
> System Firmware Version       : rsion1.0
> System Name                   : Manager
> Primary Operating System Name : SE Server 1.0
> Operating System Name         : 
> 
> Channel Information
> 
> Channel Number       : 0
> Medium Type          : IPMB (I2C)
> Protocol Type        : IPMB-1.0
> Active Session Count : 0
> Session Support      : session-less
> Vendor ID            : Intelligent Platform Management Interface forum (7154)
> 
> Channel Number       : 1
> Medium Type          : 802.3 LAN
> Protocol Type        : IPMB-1.0
> Active Session Count : 1
> Session Support      : multi-session
> Vendor ID            : Intelligent Platform Management Interface forum (7154)
> 
> best regards,
> Werner
> 
> On Mon, 2011-02-14 at 11:33 +0100, Werner Fischer wrote:
> > Hi Al,
> > 
> >       * one of our customers discovered another Supermicro system where
> >         FreeIPMI has currently no product ID information to display the
> >         OEM CPU temp sensors (he tried up to
> >         freeipmi-1.0.2.beta2.tar.gz)
> >       * It is a 6015B-3R
> >         http://www.supermicro.com/products/system/1U/6015/SYS-6015B-3R.cfm 
> > with a X7DBR-3 mainboard 
> > http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBR-3.cfm 
> > Below I have attached his output of bmc-info.
> > 
> > My questions
> >      1. Can you add the Manufacturer-ID/Product-ID for the OEM CPU temp
> >         sensors for this board? (As it is a X7-board it has IPMI not
> >         onboard (like the X8-boards do), but it uses the AOC-SIMSO(+)
> >         add on card for IPMI. Therefore the Manufacturer ID is Peppercon
> >         (not Supermicro).)
> >      2. If it is not too difficult for me and if it could lower your
> >         necessary work: Maybe you can tell me where the
> >         Manufacturer-ID/Product-ID are matched in the FreeIPMI code for
> >         the OEM sensors (so I could try add them myself in the source
> >         and I could send you directly patches)
> > 
> > Thanks for your help and best regards,
> > Werner
> > 
> > PS: Here is the output of bmc-info:
> > 
> > Device ID             : 34
> > Device Revision       : 1
> > Device SDRs           : unsupported
> > Firmware Revision     : 1.59
> > Device Available      : yes (normal operation)
> > IPMI Version          : 2.0
> > Sensor Device         : supported
> > SDR Repository Device : supported
> > SEL Device            : supported
> > FRU Inventory Device  : supported
> > IPMB Event Receiver   : unsupported
> > IPMB Event Generator  : unsupported
> > Bridge                : unsupported
> > Chassis Device        : supported
> > Manufacturer ID       : Peppercon AG (10437)
> > Product ID            : 4
> > Auxiliary Firmware Revision Information : 20540000h
> > 
> > GUID : 0F0E0D0C-0B0A-0908-BD20-9BFEFF483002
> > 
> > Channel Information
> > 
> > Channel Number       : 1
> > Medium Type          : 802.3 LAN
> > Protocol Type        : IPMB-1.0
> > Active Session Count : 1
> > Session Support      : multi-session
> > Vendor ID            : Intelligent Platform Management Interface forum
> > (7154)
> > 
> > Channel Number       : 5
> > Medium Type          : Asynch. Serial/Modem (RS-232)
> > Protocol Type        : IPMB-1.0
> > Active Session Count : 0
> > Session Support      : single-session
> > Vendor ID            : Intelligent Platform Management Interface forum
> > (7154)
> > 
> > 
> 
> 
> 
> _______________________________________________
> Freeipmi-devel mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/freeipmi-devel
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory