[Freeipmi-devel] Supermicro X7DBR-3 CPU Temperatur Sensors

[Werner Fischer]

Hi Al,

      * one of our customers discovered another Supermicro system where
        FreeIPMI has currently no product ID information to display the
        OEM CPU temp sensors (he tried up to
        freeipmi-1.0.2.beta2.tar.gz)
      * It is a 6015B-3R
        http://www.supermicro.com/products/system/1U/6015/SYS-6015B-3R.cfm with 
a X7DBR-3 mainboard 
http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBR-3.cfm Below 
I have attached his output of bmc-info.

My questions
     1. Can you add the Manufacturer-ID/Product-ID for the OEM CPU temp
        sensors for this board? (As it is a X7-board it has IPMI not
        onboard (like the X8-boards do), but it uses the AOC-SIMSO(+)
        add on card for IPMI. Therefore the Manufacturer ID is Peppercon
        (not Supermicro).)
     2. If it is not too difficult for me and if it could lower your
        necessary work: Maybe you can tell me where the
        Manufacturer-ID/Product-ID are matched in the FreeIPMI code for
        the OEM sensors (so I could try add them myself in the source
        and I could send you directly patches)

Thanks for your help and best regards,
Werner

PS: Here is the output of bmc-info:

Device ID             : 34
Device Revision       : 1
Device SDRs           : unsupported
Firmware Revision     : 1.59
Device Available      : yes (normal operation)
IPMI Version          : 2.0
Sensor Device         : supported
SDR Repository Device : supported
SEL Device            : supported
FRU Inventory Device  : supported
IPMB Event Receiver   : unsupported
IPMB Event Generator  : unsupported
Bridge                : unsupported
Chassis Device        : supported
Manufacturer ID       : Peppercon AG (10437)
Product ID            : 4
Auxiliary Firmware Revision Information : 20540000h

GUID : 0F0E0D0C-0B0A-0908-BD20-9BFEFF483002

Channel Information

Channel Number       : 1
Medium Type          : 802.3 LAN
Protocol Type        : IPMB-1.0
Active Session Count : 1
Session Support      : multi-session
Vendor ID            : Intelligent Platform Management Interface forum
(7154)

Channel Number       : 5
Medium Type          : Asynch. Serial/Modem (RS-232)
Protocol Type        : IPMB-1.0
Active Session Count : 0
Session Support      : single-session
Vendor ID            : Intelligent Platform Management Interface forum
(7154)


-- 
: Werner Fischer
: Technology Specialist
: Thomas-Krenn.AG | The server-experts
: http://www.thomas-krenn.com | http://www.thomas-krenn.com/wiki