[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] Supermicro X8DTG-QF System Event Log
|
From: |
Albert Chu |
|
Subject: |
Re: [Freeipmi-devel] Supermicro X8DTG-QF System Event Log |
|
Date: |
Fri, 02 Dec 2011 09:52:44 -0800 |
Hi Götz,
Presently the CPU oem temperatures aren't supported in ipmi-sel. I
simply didn't know they could show up in the SEL. I'll add support and
e-mail you a link to a beta later on.
As for your question in a later e-mail,
> So there is no way of getting the temperature in °C, just the values
> 'Low', 'Medium', 'High' and 'Overheat'?
For these particular sensors no. This is how Supermicro elected to
implement their sensors.
Al
On Fri, 2011-12-02 at 03:48 -0800, Götz Waschk wrote:
> Dear Freeipmi devs,
>
> I'm administrating a server with a Supermicro X8DTG-QF board. I'd like
> to read the system event log with ipmi-sel as there seem to be cooling
> problems with the system, however, the events are not interpreted:
>
> # ipmi-sel --interpret-oem-data --output-oem-event-strings
> ID | Date | Time | Name | Type | Event
> 1 | Nov-02-2011 | 00:01:14 | CPU2 Temp | OEM Reserved | OEM
> Event Offset = 02h
> 2 | Nov-02-2011 | 01:01:14 | CPU2 Temp | OEM Reserved | OEM
> Event Offset = 02h
> 3 | Nov-22-2011 | 14:02:10 | CPU1 Temp | OEM Reserved | OEM
> Event Offset = 02h
> 4 | Nov-22-2011 | 14:02:10 | CPU1 Temp | OEM Reserved | OEM
> Event Offset = 02h
> 5 | Nov-27-2011 | 22:09:21 | CPU2 Temp | OEM Reserved | OEM
> Event Offset = 02h
> 6 | Nov-27-2011 | 22:09:24 | CPU2 Temp | OEM Reserved | OEM
> Event Offset = 02h
> 7 | Nov-28-2011 | 21:02:05 | CPU2 Temp | OEM Reserved | OEM
> Event Offset = 02h
> 8 | Nov-28-2011 | 21:02:05 | CPU2 Temp | OEM Reserved | OEM
> Event Offset = 02h
>
> With ipmi-sensors I can see some more information about CPU[12] Temp:
>
> # ipmi-sensors --interpret-oem-data --output-sensor-state
> ID | Name | Type | State | Reading | Units |
> Event
> 2 | CPU1 Temp | OEM Reserved | Nominal | N/A | N/A |
> 'Low'
> 3 | CPU2 Temp | OEM Reserved | Nominal | N/A | N/A |
> 'Low'
> 4 | System Temp | Temperature | Nominal | 30.00 | C | 'OK'
> 5 | CPU1 Vcore | Voltage | Nominal | 0.94 | V | 'OK'
> 6 | CPU2 Vcore | Voltage | Nominal | 0.94 | V | 'OK'
> 7 | CPU1 VTT | Voltage | Nominal | 1.13 | V | 'OK'
> 8 | CPU2 VTT | Voltage | Nominal | 1.14 | V | 'OK'
> 9 | CPU1 DIMM | Voltage | Nominal | 1.51 | V | 'OK'
> 10 | CPU2 DIMM | Voltage | Nominal | 1.51 | V | 'OK'
> 11 | ICH 1.5V | Voltage | Nominal | 1.52 | V | 'OK'
> 12 | IOH 1.8V | Voltage | Nominal | 1.83 | V | 'OK'
> 13 | +5V | Voltage | Nominal | 5.06 | V | 'OK'
> 14 | +12V | Voltage | Nominal | 12.46 | V | 'OK'
> 15 | -12V | Voltage | Nominal | -11.60 | V | 'OK'
> 16 | IOH 1.1V | Voltage | Nominal | 1.10 | V | 'OK'
> 17 | +3.3V | Voltage | Nominal | 3.24 | V | 'OK'
> 18 | +3.3VSB | Voltage | Nominal | 3.24 | V | 'OK'
> 19 | VBAT | Voltage | Nominal | 3.12 | V | 'OK'
> 20 | Fan1 | Fan | Nominal | 4320.00 | RPM | 'OK'
> 21 | Fan2 | Fan | Nominal | 4185.00 | RPM | 'OK'
> 22 | Fan3 | Fan | Nominal | 4185.00 | RPM | 'OK'
> 23 | Fan4 | Fan | Nominal | 4185.00 | RPM | 'OK'
> 24 | Fan5 | Fan | Nominal | 4185.00 | RPM | 'OK'
> 25 | Fan6 | Fan | Nominal | 4185.00 | RPM | 'OK'
> 26 | Fan7 | Fan | Nominal | 2295.00 | RPM | 'OK'
> 27 | Fan8 | Fan | Nominal | 2160.00 | RPM | 'OK'
> 28 | Fan9 | Fan | N/A | N/A | RPM | N/A
> 29 | Fan10 | Fan | N/A | N/A | RPM | N/A
> 30 | Intrusion | Physical Security | Nominal | N/A | N/A | 'OK'
> 31 | PS Status | Power Supply | Nominal | N/A | N/A | 'OK'
> 32 | P1-DIMM1A Temp | Temperature | Nominal | 35.00 | C | 'OK'
> 33 | P1-DIMM1B Temp | Temperature | N/A | N/A | C | N/A
> 34 | P1-DIMM2A Temp | Temperature | Nominal | 35.00 | C | 'OK'
> 35 | P1-DIMM2B Temp | Temperature | N/A | N/A | C | N/A
> 36 | P1-DIMM3A Temp | Temperature | Nominal | 35.00 | C | 'OK'
> 37 | P1-DIMM3B Temp | Temperature | N/A | N/A | C | N/A
> 38 | P2-DIMM1A Temp | Temperature | Nominal | 29.00 | C | 'OK'
> 39 | P2-DIMM1B Temp | Temperature | N/A | N/A | C | N/A
> 40 | P2-DIMM2A Temp | Temperature | Nominal | 29.00 | C | 'OK'
> 41 | P2-DIMM2B Temp | Temperature | N/A | N/A | C | N/A
> 42 | P2-DIMM3A Temp | Temperature | Nominal | 31.00 | C | 'OK'
> 43 | P2-DIMM3B Temp | Temperature | N/A | N/A | C | N/A
>
> I wonder why the current temperature value is not shown by neither
> ipmi-sensors nor superodoctor.
>
> Some more information about this system:
>
> # bmc-info
> Device ID : 32
> Device Revision : 1
> Device SDRs : unsupported
> Firmware Revision : 2.01
> Device Available : yes (normal operation)
> IPMI Version : 2.0
> Sensor Device : supported
> SDR Repository Device : supported
> SEL Device : supported
> FRU Inventory Device : supported
> IPMB Event Receiver : supported
> IPMB Event Generator : supported
> Bridge : unsupported
> Chassis Device : supported
> Manufacturer ID : Super Micro Computer Inc. (47488)
> Product ID : 43707
> Auxiliary Firmware Revision Information : 00000001h
>
> GUID : 00000000-0000-0000-0000-000000434d53
>
> System Firmware Version : rsion1.0
> System Name : Manager
> Primary Operating System Name : SE Server 1.0
> Operating System Name :
>
> Channel Information
>
> Channel Number : 0
> Medium Type : IPMB (I2C)
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : session-less
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> Channel Number : 1
> Medium Type : 802.3 LAN
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : multi-session
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> I have tested with freeipmi 1.0.9 on Scientific Linux 6.1.
>
> Regards, Götz Waschk
>
> _______________________________________________
> Freeipmi-devel mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/freeipmi-devel
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory