Re: [Freeipmi-users] FreeIPMI-0.3.0 on FreeBSD 6.1 [ipmi/rmcp ping an ipmiconsole fails to compile]

[Dmitry Frolov]

Please see below...

* Tejram Meena <address@hidden> [05.12.2006 17:37]:

> ipmi_lan_sendto and ipmi_lan_recvfrom bugs in ipmiping 
> 
> IPMIPING:
> cc -DUSE_IOPERM -I/usr/local/include -o ipmiping ipmiping-ipmiping.o  
> -L/usr/local/lib ../../libfreeipmi/src/.libs/libfreeipmi.a 
> -lgcrypt ../../common/src/.libs/libipmiping.a -lm -largp
> ../../common/src/.libs/libipmiping.a(libipmiping_la-ipmi-ping.o)(.text+0xb45):
>  
> In function `_main_loop':
> : undefined reference to `ipmi_lan_sendto'
> ../../common/src/.libs/libipmiping.a(libipmiping_la-ipmi-ping.o)(.text+0xd0c):
>  
> In function `_main_loop':
> : undefined reference to `ipmi_lan_recvfrom'
> gmake[3]: *** [ipmiping] Error 1
> 
> RMCP-PING:
> gcc -DUSE_IOPERM -I/usr/local/include -o rmcpping rmcpping-rmcpping.o  
> -L/usr/local/lib ../../libfreeipmi/src/.libs/libfreeipmi.a 
> -lgcrypt ../../common/src/.libs/libipmiping.a -lm -largp
> ../../common/src/.libs/libipmiping.a(libipmiping_la-ipmi-ping.o)(.text+0x9fa):
>  
> In function `_main_loop':
> : undefined reference to `ipmi_get_random'
> ../../common/src/.libs/libipmiping.a(libipmiping_la-ipmi-ping.o)(.text+0xb45):
>  
> In function `_main_loop':
> : undefined reference to `ipmi_lan_sendto'
> ../../common/src/.libs/libipmiping.a(libipmiping_la-ipmi-ping.o)(.text+0xd0c):
>  
> In function `_main_loop':
> : undefined reference to `ipmi_lan_recvfrom'
> gmake[3]: *** [rmcpping] Error 1
> 
> 
> IPMI-CONSOLE:
> gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I./../../../config 
> -I./../../../common/src -I./../../../libfreeipmi/include 
> -DWITH_SECURE_MALLOC=1 -DWITH_PTHREADS=1 -DUSE_IOPERM -I/usr/local/include 
> -MT libipmiconsole_la-ipmiconsole_engine.lo -MD -MP 
> -MF .deps/libipmiconsole_la-ipmiconsole_engine.Tpo -c ipmiconsole_engine.c -o 
> libipmiconsole_la-ipmiconsole_engine.o
> ipmiconsole_engine.c:276:2: #error Additional threadsafe gethostbyname 
> support 
> needed
> gmake[4]: *** [libipmiconsole_la-ipmiconsole_engine.lo] Error 1

Please try to build from this port skeleton:

http://kaya.nov.net/tmp/freeipmi-0.3.0-port.tar.gz

It fixes ipmiconsole compilation. I've not seen ipmiping and rmcpping
failings You have, so please report if it's still failing.

> 
> FreeIPMI installed successfully without ipmiping, rmcpping and ipmiconsole :)
> %ipmi-locate                          # works fine
> 
> Probing KCS device using DMIDECODE... done
> IPMI Version: 1.5
> IPMI locate driver: DMIDECODE
> IPMI interface: KCS
> BMC driver device:
> BMC I/O base address: CA8
> Register space: 4
> 
> Probing SMIC device using DMIDECODE... FAILED
> 
> Probing BT device using DMIDECODE... FAILED
> 
> Probing SSIF device using DMIDECODE... FAILED
> 
> Probing KCS device using SMBIOS... FAILED
> 
> Probing SMIC device using SMBIOS... FAILED
> ...
> 
> %bmc-info                             #works fine
> Device ID:         20
> Device Revision:   0
> Firmware Revision: 1.17
>                    [Device Available (normal operation)]
> IPMI Version:      1.5
> Additional Device Support:
>                    [Sensor Device]
>                    [SDR Repository Device]
>                    [SEL Device]
>                    [IPMB Event Receiver]
>                    [IPMB Event Generator]
>                    [Chassis Device]
> Manufacturer ID:   2h
> Product ID:        4h
> Aux Firmware Revision Info: 54425041h
> Channel Information:
>        Channel No: 0
>       Medium Type: IPMB (I2C)
>     Protocol Type: IPMB-1.0
>        Channel No: 1
>       Medium Type: 802.3 LAN
>     Protocol Type: IPMB-1.0
>        Channel No: 2
>       Medium Type: Asynch. Serial/Modem (RS-232)
>     Protocol Type: IPMB-1.0
>        Channel No: 3
>       Medium Type: System Interface (KCS, SMIC, or BT)
>     Protocol Type: IPMB-1.0
> 
> But IPMI-SENSORS FAILS
> % ipmi-sensors
> ipmi-sensors: sdr cache directory setup failed      #SDR CACHE SETUP FAILED
> 
> %ipmi-sel                     #sdr cache problem
> ipmi-sel: sdr cache initialization failed

The above port skeleton also have a patch for this.
To developers: it seems that this bug is only arises on FreeBSD.

> 
> I am using IBM X series 336 machine to test sensors.

    wbr&w, dmitry.
-- 
Dmitry Frolov <address@hidden>
RISS-Telecom Network, Novosibirsk, Russia
address@hidden, +7 383 2278800, DVF-RIPE