Re: [Freeipmi-users] ipmiconsole BMC Implementation with x38ml

[Al Chu]

Hey Kimitoshi,

I think I found a corner case in the code where the non-default port was
not used correctly.  Could you give it a shot?

http://ftp.zresearch.com/pub/freeipmi/qa-
release/freeipmi-0.6.9.beta2.tar.gz

Thanks,
Al

On Wed, 2008-09-24 at 20:38 +0900, Kimitoshi Takahashi wrote:
> Hi Al,
> 
> Here it is.
> 
> address@hidden:~# /usr/ccmp/sbin/ipmiconsole -W authcap,solpayloadsize -u rt 
> -p rt -h 192.168.20.116 --debug 2>/tmp/debug
> 
> never returns to the shell.
> 
> sh-3.1$ egrep -v "^192.16" /tmp/debug_069b0_wo_solport
> (ipmiconsole_checks.c, ipmiconsole_check_outbound_sequence_number, 254): 
> hostname=192.168.20.116; protocol_state=0x5: session sequence number check 
> failed; p = 9; session_sequence_number = 0; highest_received_sequence_number 
> = 0
> (ipmiconsole_processing.c, _process_protocol_state_activate_payload_sent, 
> 2957): hostname=192.168.20.116; protocol_state=0x8: trying new port: 6F02
> (ipmiconsole_checks.c, ipmiconsole_check_outbound_sequence_number, 254): 
> hostname=192.168.20.116; protocol_state=0x5: session sequence number check 
> failed; p = 9; session_sequence_number = 0; highest_received_sequence_number 
> = 0
> 
> Attached is the --debug output.
> 
> > Hey Kimitoshi,
> > 
> > Could you try 0.6.9.beta0 w/o the solport workaround too?
> > 
> > Thanks,
> > Al
> > 

-- 
Albert Chu
address@hidden
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory