Hello,
Well we've been privy to our first true error in
Gluster now, and we're not sure of the cause.
The SaturnI machine with 1Gbyte of RAM was
exhausting its memory and crashing and we saw
core dumps on SaturnM and MMC. Replacing
the SaturnI hardware with identical hardware to
SaturnM, but retaining SaturnI's original disks,
(so fixing the memory capacity problem) we saw
crashes randomly at all nodes.
Looking for irregularities at the file system
we noticed that (we'd estimate) about 60% of
the files at the OS/EXT3 layer of SaturnI
(sourced via replicate from SaturnM) were of
size 2147483648 (2^31) where they should
have been substantially larger. While we would
happily accept "you shouldn't be using a 32bit
gluster package" as the answer, we note two
deltas;
1) All files used in testing were copied on from
32 bit clients to 32 bit servers, with no
observable errors
2) Of the file that were replicated, not all were
corrupted (capped at 2G -- note that we
confirmed that this was the first 2G of the
source file contents).
So is there a known replicate issue with files
greater than 2GB? Has anyone done any
serious testing with significant numbers of files
of this size? Are there configurations specific
to files/structures of these dimensions?
We noted that reversing the configuration, such
that SaturnI provides the replicate Brick amongst
a local distribute and a remote map to SaturnM
where SaturnM simply serves a local distribute;
that the data served to MMC is accurate (it
continues to show 15GB files, even where there
is a local 2GB copy). Further, a client "cp" at
MMC, of a file with a 2GB local replicate of a
15GB file, will result in a 15GB file being
created and replicated via Gluster (i.e. the
correct specification at both server nodes).
So my other question is; Is it possible that we've
managed to corrupt something in this
environment? I.e. during the initial memory
exhaustion events? And is there a robust way
to have the replicate files revalidated by gluster
as a stat doesn't seem to be correcting files in
this state (i.e. replicate on SaturnM results in
daemon crashes, replicate on SaturnI results
in files being left in the bad state).
Also, I'm not a member of the users list; if these
questions are better posed there then let me
know and I'll re-post them there.
Thanks,
----- Original Message -----
From: "Ian Latter"<address@hidden>
To:<address@hidden>
Subject: [Gluster-devel] replicate background threads
Date: Sun, 11 Mar 2012 20:17:15 +1000
Hello,
My mate Michael and I have been steadily
advancing our Gluster testing and today we finally
reached some heavier conditions. The outcome
was different from expectations built from our more
basic testing so I think we have a couple of
questions regarding the AFR/Replicate background
threads that may need a developer's contribution.
Any help appreciated.
The setup is a 3 box environment, but lets start
with two;
SaturnM (Server)
- 6core CPU, 16GB RAM, 1Gbps net
- 3.2.6 Kernel (custom distro)
- 3.2.5 Gluster (32bit)
- 3x2TB drives, CFQ, EXT3
- Bricked up into a single local 6TB
"distribute" brick
- "brick" served to the network
MMC (Client)
- 4core CPU, 8GB RAM, 1Gbps net
- Ubuntu
- 3.2.5 Gluster (32bit)
- Don't recall the disk space locally
- "brick" from SaturnM mounted
500 x 15Gbyte files were copied from MMC
to a single sub-directory on the brick served from
SaturnM, all went well and dandy. So then we
moved on to a 3 box environment;
SaturnI (Server)
= 1core CPU, 1GB RAM, 1Gbps net
= 3.2.6 Kernel (custom distro)
= 3.2.5 Gluster (32bit)
= 4x2TB drives, CFQ, EXT3
= Bricked up into a single local 8TB
"distribute" brick
= "brick" served to the network
SaturnM (Server/Client)
- 6core CPU, 16GB RAM, 1Gbps net
- 3.2.6 Kernel (custom distro)
- 3.2.5 Gluster (32bit)
- 3x2TB drives, CFQ, EXT3
- Bricked up into a single local 6TB
"distribute" brick
= Replicate brick added to sit over
the local distribute brick and a
client "brick" mapped from SaturnI
- Replicate "brick" served to the network
MMC (Client)
- 4core CPU, 8GB RAM, 1Gbps net
- Ubuntu
- 3.2.5 Gluster (32bit)
- Don't recall the disk space locally
- "brick" from SaturnM mounted
= "brick" from SaturnI mounted
Now, in lesser testing in this scenario all was
well - any files on SaturnI would appear on SaturnM
(not a functional part of our test) and the content on
SaturnM would appear on SaturnI (the real
objective).
Earlier testing used a handful of smaller files (10s
to 100s of Mbytes) and a single 15Gbyte file. The
15Gbyte file would be "stat" via an "ls", which would
kick off a background replication (ls appeared un-
blocked) and the file would be transferred. Also,
interrupting the transfer (pulling the LAN cable)
would result in a partial 15Gbyte file being corrected
in a subsequent background process on another
stat.
*However* .. when confronted with 500 x 15Gbyte
files, in a single directory (but not the root directory)
things don't quite work out as nicely.
- First, the "ls" (at MMC against the SaturnM brick)
is blocking and hangs the terminal (ctrl-c doesn't
kill it).