Re: gnokii and Nokia Card Phone RPM-3 GSM900/1800

[Vieri]

By the way, I noticed that the most frequent error I'm getting is related to 
AT+CMGS (send message) and gives me a return code=11:

(...)
Message sent: 0x63 / 0x000a
41 54 2b 43 4d 47 46 3d 30 0d                   | AT+CMGF=0
write: [AT+CMGF=0<cr>]
read : [AT+CMGF=0<cr><cr><lf>OK<cr><lf>]
Message received: 0x63 / 0x0010
02 41 54 2b 43 4d 47 46 3d 30 0d 0d 0a 4f 4b 0d |  AT+CMGF=0   OK
Received message type 63
PDU mode set
Sending initial sequence
Message sent: 0x64 / 0x000b
41 54 2b 43 4d 47 53 3d 32 37 0d                | AT+CMGS=27
write: [AT+CMGS=27<cr>]
Got response 11
SMS Send failed (Command timed out.)
Serial device: closing device