qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v2 13/28] riscv: sifive_e: prci: Update the PRCI


From: Chih-Min Chao
Subject: Re: [Qemu-devel] [PATCH v2 13/28] riscv: sifive_e: prci: Update the PRCI register block size
Date: Wed, 7 Aug 2019 17:00:25 +0800

On Wed, Aug 7, 2019 at 3:49 PM Bin Meng <address@hidden> wrote:

> Currently the PRCI register block size is set to 0x8000, but in fact
> 0x1000 is enough, which is also what the manual says.
>
> Signed-off-by: Bin Meng <address@hidden>
> ---
>
> Changes in v2: None
>
>  hw/riscv/sifive_e_prci.c         | 2 +-
>  include/hw/riscv/sifive_e_prci.h | 2 ++
>  2 files changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/hw/riscv/sifive_e_prci.c b/hw/riscv/sifive_e_prci.c
> index c906f11..4cbce48 100644
> --- a/hw/riscv/sifive_e_prci.c
> +++ b/hw/riscv/sifive_e_prci.c
> @@ -85,7 +85,7 @@ static void sifive_prci_init(Object *obj)
>      SiFivePRCIState *s = SIFIVE_E_PRCI(obj);
>
>      memory_region_init_io(&s->mmio, obj, &sifive_prci_ops, s,
> -                          TYPE_SIFIVE_E_PRCI, 0x8000);
> +                          TYPE_SIFIVE_E_PRCI, SIFIVE_E_PRCI_REG_SIZE);
>      sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
>
>      s->hfrosccfg = (SIFIVE_PRCI_HFROSCCFG_RDY | SIFIVE_PRCI_HFROSCCFG_EN);
> diff --git a/include/hw/riscv/sifive_e_prci.h
> b/include/hw/riscv/sifive_e_prci.h
> index 7932fe7..81e506b 100644
> --- a/include/hw/riscv/sifive_e_prci.h
> +++ b/include/hw/riscv/sifive_e_prci.h
> @@ -47,6 +47,8 @@ enum {
>      SIFIVE_PRCI_PLLOUTDIV_DIV1  = (1 << 8)
>  };
>
> +#define SIFIVE_E_PRCI_REG_SIZE  0x1000
> +
>  #define TYPE_SIFIVE_E_PRCI      "riscv.sifive.e.prci"
>
>  #define SIFIVE_E_PRCI(obj) \
> --
> 2.7.4
>
>
> Reviewed-by: Chih-Min Chao <address@hidden>


reply via email to

[Prev in Thread] Current Thread [Next in Thread]