[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 21/30] virtiofsd: Start reading commands from queue
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [PATCH 21/30] virtiofsd: Start reading commands from queue |
Date: |
Tue, 22 Oct 2019 11:28:05 +0100 |
User-agent: |
Mutt/1.12.1 (2019-06-15) |
* Marc-André Lureau (address@hidden) wrote:
> On Mon, Oct 21, 2019 at 1:09 PM Dr. David Alan Gilbert (git)
> <address@hidden> wrote:
> >
> > From: "Dr. David Alan Gilbert" <address@hidden>
> >
> > Pop queue elements off queues, copy the data from them and
> > pass that to fuse.
> >
> > Note: 'out' in a VuVirtqElement is from QEMU
> > 'in' in libfuse is into the daemon
> >
> > So we read from the out iov's to get a fuse_in_header
> >
> > When we get a kick we've got to read all the elements until the queue
> > is empty.
> >
> > Signed-off-by: Dr. David Alan Gilbert <address@hidden>
> > ---
> > contrib/virtiofsd/fuse_i.h | 2 +
> > contrib/virtiofsd/fuse_virtio.c | 99 ++++++++++++++++++++++++++++++++-
> > 2 files changed, 98 insertions(+), 3 deletions(-)
> >
> > diff --git a/contrib/virtiofsd/fuse_i.h b/contrib/virtiofsd/fuse_i.h
> > index ea55f618a5..5b6ef09df5 100644
> > --- a/contrib/virtiofsd/fuse_i.h
> > +++ b/contrib/virtiofsd/fuse_i.h
> > @@ -14,6 +14,7 @@
> > #include "fuse_lowlevel.h"
> >
> > struct fv_VuDev;
> > +struct fv_QueueInfo;
> >
> > struct fuse_req {
> > struct fuse_session *se;
> > @@ -75,6 +76,7 @@ struct fuse_chan {
> > pthread_mutex_t lock;
> > int ctr;
> > int fd;
> > + struct fv_QueueInfo *qi;
> > };
> >
> > /**
> > diff --git a/contrib/virtiofsd/fuse_virtio.c
> > b/contrib/virtiofsd/fuse_virtio.c
> > index 0513531c13..e189511729 100644
> > --- a/contrib/virtiofsd/fuse_virtio.c
> > +++ b/contrib/virtiofsd/fuse_virtio.c
> > @@ -32,6 +32,7 @@
> >
> > #include "contrib/libvhost-user/libvhost-user.h"
> >
> > +struct fv_VuDev;
> > struct fv_QueueInfo {
> > pthread_t thread;
> > struct fv_VuDev *virtio_dev;
> > @@ -101,10 +102,42 @@ static void fv_panic(VuDev *dev, const char *err)
> > exit(EXIT_FAILURE);
> > }
> >
> > +/*
> > + * Copy from an iovec into a fuse_buf (memory only)
> > + * Caller must ensure there is space
> > + */
> > +static void copy_from_iov(struct fuse_buf *buf, size_t out_num,
> > + const struct iovec *out_sg)
> > +{
> > + void *dest = buf->mem;
> > +
> > + while (out_num) {
> > + size_t onelen = out_sg->iov_len;
> > + memcpy(dest, out_sg->iov_base, onelen);
> > + dest += onelen;
> > + out_sg++;
> > + out_num--;
> > + }
> > +}
>
> Or iov_to_buf()
Is there a variant there that will copy the whole of an iovec?
I just tried swapping the copy_from_iov out, but it's messier to use
because it wants the bytes length; where in most cases I'm taking a
single element from the iovec, or the 'rest of the iovec' by element
count.
Dave
> Just found out that vhost-user-blk.c should probably link too with
> util/iov.o, instead of copying the code.
>
> > +
> > /* Thread function for individual queues, created when a queue is
> > 'started' */
> > static void *fv_queue_thread(void *opaque)
> > {
> > struct fv_QueueInfo *qi = opaque;
> > + struct VuDev *dev = &qi->virtio_dev->dev;
> > + struct VuVirtq *q = vu_get_queue(dev, qi->qidx);
> > + struct fuse_session *se = qi->virtio_dev->se;
> > + struct fuse_chan ch;
> > + struct fuse_buf fbuf;
> > +
> > + fbuf.mem = NULL;
> > + fbuf.flags = 0;
> > +
> > + fuse_mutex_init(&ch.lock);
> > + ch.fd = (int)0xdaff0d111;
> > + ch.ctr = 1;
> > + ch.qi = qi;
> > +
> > fuse_log(FUSE_LOG_INFO, "%s: Start for queue %d kick_fd %d\n",
> > __func__,
> > qi->qidx, qi->kick_fd);
> > while (1) {
> > @@ -141,11 +174,71 @@ static void *fv_queue_thread(void *opaque)
> > fuse_log(FUSE_LOG_ERR, "Eventfd_read for queue: %m\n");
> > break;
> > }
> > - if (qi->virtio_dev->se->debug) {
> > - fprintf(stderr, "%s: Queue %d gave evalue: %zx\n", __func__,
> > - qi->qidx, (size_t)evalue);
> > + /* out is from guest, in is too guest */
> > + unsigned int in_bytes, out_bytes;
> > + vu_queue_get_avail_bytes(dev, q, &in_bytes, &out_bytes, ~0, ~0);
> > +
> > + fuse_log(FUSE_LOG_DEBUG,
> > + "%s: Queue %d gave evalue: %zx available: in: %u out:
> > %u\n",
> > + __func__, qi->qidx, (size_t)evalue, in_bytes, out_bytes);
> > +
> > + while (1) {
> > + /*
> > + * An element contains one request and the space to send our
> > + * response They're spread over multiple descriptors in a
> > + * scatter/gather set and we can't trust the guest to keep them
> > + * still; so copy in/out.
> > + */
> > + VuVirtqElement *elem = vu_queue_pop(dev, q,
> > sizeof(VuVirtqElement));
> > + if (!elem) {
> > + break;
> > + }
> > +
> > + if (!fbuf.mem) {
> > + fbuf.mem = malloc(se->bufsize);
> > + assert(fbuf.mem);
> > + assert(se->bufsize > sizeof(struct fuse_in_header));
> > + }
> > + /* The 'out' part of the elem is from qemu */
> > + unsigned int out_num = elem->out_num;
> > + struct iovec *out_sg = elem->out_sg;
> > + size_t out_len = iov_length(out_sg, out_num);
> > + fuse_log(FUSE_LOG_DEBUG,
> > + "%s: elem %d: with %d out desc of length %zd\n",
> > __func__,
> > + elem->index, out_num, out_len);
> > +
> > + /*
> > + * The elem should contain a 'fuse_in_header' (in to fuse)
> > + * plus the data based on the len in the header.
> > + */
> > + if (out_len < sizeof(struct fuse_in_header)) {
> > + fuse_log(FUSE_LOG_ERR, "%s: elem %d too short for
> > in_header\n",
> > + __func__, elem->index);
> > + assert(0); /* TODO */
> > + }
> > + if (out_len > se->bufsize) {
> > + fuse_log(FUSE_LOG_ERR, "%s: elem %d too large for
> > buffer\n",
> > + __func__, elem->index);
> > + assert(0); /* TODO */
> > + }
> > + copy_from_iov(&fbuf, out_num, out_sg);
> > + fbuf.size = out_len;
> > +
> > + /* TODO! Endianness of header */
> > +
> > + /* TODO: Fixup fuse_send_msg */
> > + /* TODO: Add checks for fuse_session_exited */
> > + fuse_session_process_buf_int(se, &fbuf, &ch);
> > +
> > + /* TODO: vu_queue_push(dev, q, elem, qi->write_count); */
> > + vu_queue_notify(dev, q);
> > +
> > + free(elem);
> > + elem = NULL;
> > }
> > }
> > + pthread_mutex_destroy(&ch.lock);
> > + free(fbuf.mem);
> >
> > return NULL;
> > }
> > --
> > 2.23.0
> >
> >
>
>
> --
> Marc-André Lureau
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
- [PATCH 17/30] virtiofsd: Add main virtio loop, (continued)
- [PATCH 17/30] virtiofsd: Add main virtio loop, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 19/30] virtiofsd: Start queue threads, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 20/30] virtiofsd: Poll kick_fd for queue, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 18/30] virtiofsd: get/set features callbacks, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 23/30] virtiofsd: Keep track of replies, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 22/30] virtiofsd: Send replies to messages, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 21/30] virtiofsd: Start reading commands from queue, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 27/30] virtiofsd: make -f (foreground) the default, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 24/30] virtiofsd: Add Makefile wiring for virtiofsd contrib, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 26/30] virtiofsd: add --fd=FDNUM fd passing option, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 25/30] virtiofsd: Fast path for virtio read, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 29/30] virtiofsd: add --print-capabilities option, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 30/30] virtiofs: Add maintainers entry, Dr. David Alan Gilbert (git), 2019/10/21
- [PATCH 28/30] virtiofsd: add vhost-user.json file, Dr. David Alan Gilbert (git), 2019/10/21
- Re: [PATCH 00/30] virtiofs daemon (base), no-reply, 2019/10/21