qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 4/8] mac_via: add GPIO for A/UX mode


From: Laurent Vivier
Subject: Re: [PATCH 4/8] mac_via: add GPIO for A/UX mode
Date: Fri, 15 Oct 2021 08:58:41 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.11.0

Le 13/10/2021 à 23:21, Mark Cave-Ayland a écrit :
> Add a new auxmode GPIO that is updated when port B bit 6 is changed indicating
> whether the hardware is configured for A/UX mode.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/misc/mac_via.c         | 18 ++++++++++++++++++
>  hw/misc/trace-events      |  1 +
>  include/hw/misc/mac_via.h |  1 +
>  3 files changed, 20 insertions(+)
> 
> diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c
> index 7a53a8b4c0..a08ffbcd88 100644
> --- a/hw/misc/mac_via.c
> +++ b/hw/misc/mac_via.c
> @@ -880,6 +880,20 @@ static void via1_adb_update(MOS6522Q800VIA1State *v1s)
>      }
>  }
>  
> +static void via1_auxmode_update(MOS6522Q800VIA1State *v1s)
> +{
> +    MOS6522State *s = MOS6522(v1s);
> +    int oldirq, irq;
> +

Please, add a comment to explain what happens here as "vMystery" is not 
self-explicit.

> +    oldirq = (v1s->last_b & VIA1B_vMystery) ? 1 : 0;
> +    irq = (s->b & VIA1B_vMystery) ? 1 : 0;

For me, it would be clearer with:

    oldirq = !!(v1s->last_b & VIA1B_vMystery);
    irq = !!(s->b & VIA1B_vMystery);

but it's a matter of taste.


> +
> +    if (irq != oldirq) {
> +        trace_via1_auxmode(irq);
> +        qemu_set_irq(v1s->auxmode_irq, irq);
> +    }
> +}
> +
>  static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned 
> size)
>  {
>      MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
> @@ -902,6 +916,7 @@ static void mos6522_q800_via1_write(void *opaque, hwaddr 
> addr, uint64_t val,
>      case VIA_REG_B:
>          via1_rtc_update(v1s);
>          via1_adb_update(v1s);
> +        via1_auxmode_update(v1s);
>  
>          v1s->last_b = ms->b;
>          break;
> @@ -1046,6 +1061,9 @@ static void mos6522_q800_via1_init(Object *obj)
>                TYPE_ADB_BUS, DEVICE(v1s), "adb.0");
>  
>      qdev_init_gpio_in(DEVICE(obj), via1_irq_request, VIA1_IRQ_NB);
> +
> +    /* A/UX mode */
> +    qdev_init_gpio_out(DEVICE(obj), &v1s->auxmode_irq, 1);
>  }
>  
>  static const VMStateDescription vmstate_q800_via1 = {
> diff --git a/hw/misc/trace-events b/hw/misc/trace-events
> index ede413965b..2da96d167a 100644
> --- a/hw/misc/trace-events
> +++ b/hw/misc/trace-events
> @@ -228,6 +228,7 @@ via1_rtc_cmd_pram_sect_write(int sector, int offset, int 
> addr, int value) "secto
>  via1_adb_send(const char *state, uint8_t data, const char *vadbint) "state 
> %s data=0x%02x vADBInt=%s"
>  via1_adb_receive(const char *state, uint8_t data, const char *vadbint, int 
> status, int index, int size) "state %s data=0x%02x vADBInt=%s status=0x%x 
> index=%d size=%d"
>  via1_adb_poll(uint8_t data, const char *vadbint, int status, int index, int 
> size) "data=0x%02x vADBInt=%s status=0x%x index=%d size=%d"
> +via1_auxmode(int mode) "setting auxmode to %d"
>  
>  # grlib_ahb_apb_pnp.c
>  grlib_ahb_pnp_read(uint64_t addr, uint32_t value) "AHB PnP read 
> addr:0x%03"PRIx64" data:0x%08x"
> diff --git a/include/hw/misc/mac_via.h b/include/hw/misc/mac_via.h
> index 4506abe5d0..b445565866 100644
> --- a/include/hw/misc/mac_via.h
> +++ b/include/hw/misc/mac_via.h
> @@ -43,6 +43,7 @@ struct MOS6522Q800VIA1State {
>      MemoryRegion via_mem;
>  
>      qemu_irq irqs[VIA1_IRQ_NB];
> +    qemu_irq auxmode_irq;
>      uint8_t last_b;
>  
>      /* RTC */
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]