[PATCH QEMU v5 7/8] migration: Extend query-migrate to provide dirty page limit info

[~hyman]

From: Hyman Huang(黄勇) <yong.huang@smartx.com>

Extend query-migrate to provide throttle time and estimated
ring full time with dirty-limit capability enabled, through which
we can observe if dirty limit take effect during live migration.

Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 include/sysemu/dirtylimit.h    |  2 ++
 migration/migration-hmp-cmds.c | 10 +++++++++
 migration/migration.c          | 10 +++++++++
 qapi/migration.json            | 15 ++++++++++++-
 softmmu/dirtylimit.c           | 39 ++++++++++++++++++++++++++++++++++
 5 files changed, 75 insertions(+), 1 deletion(-)

diff --git a/include/sysemu/dirtylimit.h b/include/sysemu/dirtylimit.h
index 8d2c1f3a6b..410a2bc0b6 100644
--- a/include/sysemu/dirtylimit.h
+++ b/include/sysemu/dirtylimit.h
@@ -34,4 +34,6 @@ void dirtylimit_set_vcpu(int cpu_index,
 void dirtylimit_set_all(uint64_t quota,
                         bool enable);
 void dirtylimit_vcpu_execute(CPUState *cpu);
+int64_t dirtylimit_throttle_time_per_round(void);
+int64_t dirtylimit_ring_full_time(void);
 #endif
diff --git a/migration/migration-hmp-cmds.c b/migration/migration-hmp-cmds.c
index 35e8020bbf..893c87493d 100644
--- a/migration/migration-hmp-cmds.c
+++ b/migration/migration-hmp-cmds.c
@@ -190,6 +190,16 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict)
                        info->cpu_throttle_percentage);
     }
 
+    if (info->has_dirty_limit_throttle_time_per_round) {
+        monitor_printf(mon, "dirty-limit throttle time: %" PRIi64 " us\n",
+                       info->dirty_limit_throttle_time_per_round);
+    }
+
+    if (info->has_dirty_limit_ring_full_time) {
+        monitor_printf(mon, "dirty-limit ring full time: %" PRIi64 " us\n",
+                       info->dirty_limit_ring_full_time);
+    }
+
     if (info->has_postcopy_blocktime) {
         monitor_printf(mon, "postcopy blocktime: %u\n",
                        info->postcopy_blocktime);
diff --git a/migration/migration.c b/migration/migration.c
index 4278b48af0..5e1abc9cee 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -64,6 +64,7 @@
 #include "yank_functions.h"
 #include "sysemu/qtest.h"
 #include "options.h"
+#include "sysemu/dirtylimit.h"
 
 static NotifierList migration_state_notifiers =
     NOTIFIER_LIST_INITIALIZER(migration_state_notifiers);
@@ -968,6 +969,15 @@ static void populate_ram_info(MigrationInfo *info, 
MigrationState *s)
         info->ram->dirty_pages_rate =
            stat64_get(&mig_stats.dirty_pages_rate);
     }
+
+    if (migrate_dirty_limit() && dirtylimit_in_service()) {
+        info->has_dirty_limit_throttle_time_per_round = true;
+        info->dirty_limit_throttle_time_per_round =
+                            dirtylimit_throttle_time_per_round();
+
+        info->has_dirty_limit_ring_full_time = true;
+        info->dirty_limit_ring_full_time = dirtylimit_ring_full_time();
+    }
 }
 
 static void populate_disk_info(MigrationInfo *info)
diff --git a/qapi/migration.json b/qapi/migration.json
index 0c4827d9c9..b31a8c615c 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -250,6 +250,17 @@
 #     blocked.  Present and non-empty when migration is blocked.
 #     (since 6.0)
 #
+# @dirty-limit-throttle-time-per-round: Maximum throttle time (in 
microseconds) of virtual
+#                                       CPUs each dirty ring full round, which 
shows how
+#                                       MigrationCapability dirty-limit 
affects the guest
+#                                       during live migration. (since 8.1)
+#
+# @dirty-limit-ring-full-time: Estimated average dirty ring full time (in 
microseconds)
+#                              each dirty ring full round, note that the value 
equals
+#                              dirty ring memory size divided by average dirty 
page rate
+#                              of virtual CPU, which can be used to observe 
the average
+#                              memory load of virtual CPU indirectly. (since 
8.1)
+#
 # Since: 0.14
 ##
 { 'struct': 'MigrationInfo',
@@ -267,7 +278,9 @@
            '*postcopy-blocktime' : 'uint32',
            '*postcopy-vcpu-blocktime': ['uint32'],
            '*compression': 'CompressionStats',
-           '*socket-address': ['SocketAddress'] } }
+           '*socket-address': ['SocketAddress'],
+           '*dirty-limit-throttle-time-per-round': 'int64',
+           '*dirty-limit-ring-full-time': 'int64'} }
 
 ##
 # @query-migrate:
diff --git a/softmmu/dirtylimit.c b/softmmu/dirtylimit.c
index ee47158986..0fb9d5b171 100644
--- a/softmmu/dirtylimit.c
+++ b/softmmu/dirtylimit.c
@@ -558,6 +558,45 @@ out:
     hmp_handle_error(mon, err);
 }
 
+/* Return the max throttle time of each virtual CPU */
+int64_t dirtylimit_throttle_time_per_round(void)
+{
+    CPUState *cpu;
+    int64_t max = 0;
+
+    CPU_FOREACH(cpu) {
+        if (cpu->throttle_us_per_full > max) {
+            max = cpu->throttle_us_per_full;
+        }
+    }
+
+    return max;
+}
+
+/*
+ * Estimate average dirty ring full time of each virtaul CPU.
+ * Return -1 if guest doesn't dirty memory.
+ */
+int64_t dirtylimit_ring_full_time(void)
+{
+    CPUState *cpu;
+    uint64_t curr_rate = 0;
+    int nvcpus = 0;
+
+    CPU_FOREACH(cpu) {
+        if (cpu->running) {
+            nvcpus++;
+            curr_rate += vcpu_dirty_rate_get(cpu->cpu_index);
+        }
+    }
+
+    if (!curr_rate || !nvcpus) {
+        return -1;
+    }
+
+    return dirtylimit_dirty_ring_full_time(curr_rate / nvcpus);
+}
+
 static struct DirtyLimitInfo *dirtylimit_query_vcpu(int cpu_index)
 {
     DirtyLimitInfo *info = NULL;
-- 
2.38.5