[Slackware.it] Re: Re: Slacke 12

[claudio_chicco]

address@hidden wrote:
> Argomenti del Giorno:
>
>    1. Re: Slacke 12 (paolo massei)
>    2. Re: Slacke 12 (Marco)
>   
> No. Piuttosto sarebbe magari opportuno controllare di cosa si lagna dmesg
> ( ed i vari altri file di log) e preparare un kernel acconci a quella
> macchina.
> Per esempio, se hai una scheda sonora ISA, allora devi sputar piu' sangue
> per farla andare ma nulla di piu'. 
> Con quale kernel avvii? E come hai istallato se il dvd ed il floppo non ti vengon visti?
>   
Beh, mandane qualcuno in lista che ci diamo un'occhiata, no?

> Secondo voi, su un Pc così "antico" sarebbe meglio mettere la 10 o la 11?


Antico un PentiumII?


Ho installato il kernel proposto di default.
Dovessi compilarne un altro, è passato così tanto tempo dall'ultima
volta che l'ho fatto, che non ricordo nulla!

Alcune lagne dmesg....

ACPI: Core revision 20070126
ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading
namespace from ACPI tables [20070126]
ACPI: Unable to load the System Description Tables
CPU0: Intel Pentium II (Deschutes) stepping 02
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
......
pnp: PnP ACPI: disabled
SCSI subsystem initialized
......
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
......
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
   ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
   ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 91301U3, ATA DISK drive
hdb: ST320413A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA MK3021GAS, ATA DISK drive
hdd: TSSTcorpCD/DVDW SH-S182D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
...
hdb: max request size: 128KiB
hdb: Host Protected Area detected.
       current capacity is 39102336 sectors (20020 MB)
       native  capacity is 39102337 sectors (20020 MB)
hdb: Host Protected Area disabled.
hdb: 39102337 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63, UDMA(33)
hdb: cache flushes not supported
hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 > hdb3
...
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
...
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
.....
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
...
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=39102336,
sector=39102336
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=39102336,
sector=39102336
ide: failed opcode was: unknown
...
end_request: I/O error, dev hdb, sector 39102336
Buffer I/O error on device hdb, logical block 39102336
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
....
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
ide0: reset: success
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 39102336
Buffer I/O error on device hdb, logical block 39102336
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
...
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
ide0: reset: success
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 39102336
Buffer I/O error on device hdb, logical block 39102336
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
...
end_request: I/O error, dev hdb, sector 39102336
Buffer I/O error on device hdb, logical block 39102336
Linux agpgart interface v0.102 (c) Dave Jones
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
kobject_add failed for uhci_hcd with -EEXIST, don't try to register
things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
:::
ide0: reset: success
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 39102336
Buffer I/O error on device hdb, logical block 39102336
...
input: PC Speaker as /class/input/input2
input: ImPS/2 Generic Wheel Mouse as /class/input/input3
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
...
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present


Avevo già tribolato con la 10, ma poi compilando il kernel 2.6.13(?) ero
riuscito a fare
diverse cose. (modem, sonoro, etc.)
Qui sono un poco demoralizzato. Ho l'altro Hd del portatile (defunto)
montato, ma non riesco a recuperare openoffice (non so dove sia) e non
trovo in rete che aggiornamenti. Insomma, sono fermo col lavoro a 
lottare col so. Ma mi sono sicuro che col vostro aiuto ce la farò!

Saluti a tutti e scusate la lagnosità dei principianti.

Claudio