traverso-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Traverso-devel] jack bus confusion


From: Philipp Überbacher
Subject: Re: [Traverso-devel] jack bus confusion
Date: Thu, 26 Aug 2010 21:08:26 +0200
User-agent: Sup/0.11

Excerpts from plutek's message of 2010-08-26 20:21:53 +0200:
> Excerpts from Philipp Überbacher's message of Thu Aug 26 13:52:55 -0400 2010:
> > Excerpts from plutek's message of 2010-08-26 19:23:25 +0200:
> > > 
> > > greetings!
> > > 
> > > working with current git, it is unclear to me how to connect track inputs 
> > > to my system:capture_1 (etc.) inputs which exist in jack. i'm using an 
> > > RME Multiface, and have 18 such inputs. when traverso is started, my 
> > > connections panel in qjackctl shows my 18 system inputs and two traverso 
> > > outputs on the left side, and only my 18 system outputs on the right side 
> > > -- there is no input entry for traverso at all.
> > > 
> > > if i go to a track properties panel in traverso, the "Inputs" section 
> > > shows Capture 1-2 greyed out, and they cannot be removed or changed. the 
> > > "Set Input" dropdown contains nothing at all.
> > > 
> > > i'm confused. how do i access my 18 jack capture ports to connect to 
> > > track inputs? am i missing some setup thingy?
> > > 
> > > thanks much... cheers!
> > 
> > Hi Peter,
> > which version of Traverso are you using?
> > As far as I know, 0.49.X does only support two jack input and output
> > ports.
> > 
> > However, a lot has changed in the git version, especially with regards
> > to jack. It allows for any number of jack ports and has a more powerful
> > internal routing. It's not exactly stable yet, but it's worth a try.
> 
> thanks, philipp!
> 
> yes, i'm using current git.
> 
> i know that the jack routing has seen considerable expansion and work lately 
> -- that's why i'm more interested than ever. i just don't see how to connect 
> arbitrary jack capture ports to traverso inputs.
> 
> cheers!

Hi Peter,
I just tried it myself again after a while, and it seems to be still
broken in a couple of ways.

What should give you jack in/out ports is a new track: <ctrl> + <t>.

But judging from my brief test it's still unusable. I did manage to
record something but couldn't get it to play back. The ports of removed
tracks didn't disappear, etc.
-- 
Philipp

--
"Wir stehen selbst enttäuscht und sehn betroffen / Den Vorhang zu
und alle Fragen offen." Bertolt Brecht, Der gute Mensch von Sezuan




reply via email to

[Prev in Thread] Current Thread [Next in Thread]