Re: [Health] Raspberry Pi Installation issue

[Livingstone, Euan]

>   It looks like you have mixed installations, one using packages from the
>   distribution and one manual. You should not mix both and choose one way.

Ok so you have just lost me, lol.  I not sure what you mean.  Is it that I have 
install the tryton server wrong?  I have tried to follow the install 
instructions but my of installed the prerequested software wrongly.



________________________________________
From: address@hidden <address@hidden> on behalf of Cédric Krier <address@hidden>
Sent: 18 December 2015 12:20
To: address@hidden
Subject: Re: [Health] Raspberry Pi Installation issue

On 2015-12-18 12:10, Livingstone, Euan wrote:
> When I first power up the pi the tryton server is running but is being run by 
> 'tryton'.   If I try the tryton client on pi it appears to connect but fails 
> to connect from windows pc. If I then try to create a database using the pi 
> it fails; 'access denied: sorry, wrong password for the Tryton server. Please 
> try again.'
>
> If I kill the server and restart it as gnuhealth I can't connect to it :(
>
>       address@hidden:~ $ ps aux | grep tryton
>       tryton     716  7.0  1.4  26896 13512 ?        Ssl  12:01   0:01 
> /usr/bin/python /usr/bin/trytond --config /etc/tryton/trytond.conf --logconf 
> /etc/tryton/trytond_log.conf
>       pi         938  0.0  0.2   4260  1972 pts/0    S+   12:01   0:00 grep 
> --color=auto tryton
>       address@hidden:~ $ sudo /etc/init.d/tryton-server stop
>       [ ok ] Stopping tryton-server (via systemctl): tryton-server.service.
>       address@hidden:~ $ su - gnuhealth
>       Password:
>      address@hidden:~ $ cdexe
>      address@hidden:~/gnuhealth/tryton/server/trytond-3.4.8/bin $ ./trytond
>      [Fri Dec 18 12:02:35 2015] INFO:trytond.server:using 
> /home/gnuhealth/gnuhealth/tryton/server/config/trytond.conf as configuration 
> file
>      [Fri Dec 18 12:02:35 2015] INFO:trytond.server:initialising distributed 
> objects services
>      [Fri Dec 18 12:02:36 2015] INFO:trytond.server:starting JSON-RPC 
> protocol on *:8000

It looks like you have mixed installations, one using packages from the
distribution and one manual. You should not mix both and choose one way.

--
Cédric Krier - B2CK SPRL
Email/Jabber: address@hidden
Tel: +32 472 54 46 59
Website: http://www.b2ck.com/
This message and its attachment(s) are intended for the addressee(s) only and 
should not be read, copied, disclosed, forwarded or relied upon by any person 
other than the intended addressee(s) without the permission of the sender. If 
you are not the intended addressee you must not take any action based on this 
message and its attachment(s) nor must you copy or show them to anyone. Please 
respond to the sender and ensure that this message and its attachment(s) are 
deleted.

It is your responsibility to ensure that this message and its attachment(s) are 
scanned for viruses or other defects. Edinburgh Napier University does not 
accept liability for any loss or damage which may result from this message or 
its attachment(s), or for errors or omissions arising after it was sent. Email 
is not a secure medium. Emails entering Edinburgh Napier University's system 
are subject to routine monitoring and filtering by Edinburgh Napier University.

Edinburgh Napier University is a registered Scottish charity. Registration 
number SC018373