[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
R: R: Cannot run a command
From: |
Vincenzo Mone |
Subject: |
R: R: Cannot run a command |
Date: |
Thu, 3 Sep 2020 05:27:59 +0200 |
So Marcus,
which is the solution or there are none?
Thanks
73’s de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
*********************************
****** GSM +39 328 7110193 ******
***** SMS +39 328 7110193 *****
*********************************
> -----Messaggio originale-----
> Da: Discuss-gnuradio <discuss-gnuradio-bounces+vimone=alice.it@gnu.org>
> Per conto di Marcus Müller
> Inviato: mercoledì 2 settembre 2020 22:55
> A: discuss-gnuradio@gnu.org
> Oggetto: Re: R: Cannot run a command
>
> Vincenzo,
>
> trying to use the python2 pip will not help you, please read my last email.
> Thank you.
>
> Best regards,
> Marcus
>
> On 02/09/2020 22.53, Vincenzo Mone wrote:
> > Hello Fabian,
> > I have tried how you said with the command:
> >
> > But I get this:
> >
> > DEPRECATION: Python 2.7 reached the end of its life on January 1st, 2020.
> > Please upgrade your Python as Python 2.7 is no longer maintained. pip
> > 21.0 will drop support for Python 2.7 in January 2021. More details
> > about Python
> > 2 support in pip can be found at
> > https://pip.pypa.io/en/latest/development/release-process/#python-2-su
> > pport Defaulting to user installation because normal site-packages is
> > not writeable
> > ERROR: Could not find a version that satisfies the requirement PyQt5
> > (from
> > versions: none)
> > ERROR: No matching distribution found for PyQt5
> >
> > Please have I done something wrong?
> > Thanks a lot
> >
> > 73's de Enzo IK8OZV
> > EasyLog 5 BetaTester
> > EasyLog PDA BetaTester
> > WinBollet BetaTester
> > D.C.I. CheckPoint Regione Campania
> > Skype: ik8ozv8520
> >
> >
> >
> >
> > *********************************
> > ****** GSM +39 328 7110193 ******
> > ***** SMS +39 328 7110193 *****
> > *********************************
> >
> >> -----Messaggio originale-----
> >> Da: Discuss-gnuradio
> >> <discuss-gnuradio-bounces+vimone=alice.it@gnu.org>
> >> Per conto di Fabian Schwartau
> >> Inviato: martedì 1 settembre 2020 15:31
> >> A: discuss-gnuradio@gnu.org
> >> Oggetto: Re: Cannot run a command
> >>
> >> Hi Vincenzo,
> >>
> >> urllib2 is not available in Python3 any more, as far as I know. So
> >> this
> > seens to
> >> be a Python2 script. Use
> >> pip2 install PyQt5
> >> to install PyQt, then it should work. Keep in mind that Python2 is
> >> out of
> > date
> >> and should not be used any more.
> >>
> >> Best regards,
> >> Fabian
> >>
> >> Am 01.09.20 um 11:22 schrieb Vincenzo Mone:
> >>> Hello ,
> >>>
> >>> I have installed UBUNTU 20.4 and have to run one of these commands:
> >>>
> >>>
> >>>
> >>> python2
> >>> ~/gr-lilacsat-pyqt5/examples/BY70-2/DSLWP-Downlink-
> >> Proxy/mun_downlink_
> >>> proxy.py
> >>>
> >>> or
> >>>
> >>> python3
> >>> ~/gr-lilacsat-pyqt5/examples/BY70-2/DSLWP-Downlink-
> >> Proxy/mun_downlink_
> >>> proxy.py
> >>>
> >>>
> >>>
> >>> but no one works for my purpose.
> >>>
> >>> If I run:
> >>>
> >>>
> >>>
> >>> python2
> >>> ~/gr-lilacsat-pyqt5/examples/BY70-2/DSLWP-Downlink-
> >> Proxy/mun_downlink_
> >>> proxy.py
> >>>
> >>>
> >>>
> >>> I get:
> >>>
> >>>
> >>>
> >>> Traceback (most recent call last):
> >>>
> >>> File
> >>> "/home/enzo/gr-lilacsat-pyqt5/examples/BY70-2/DSLWP-Downlink-
> >> Proxy/mun
> >>> _downlink_proxy.py",
> >>> line 31, in <module>
> >>>
> >>> from PyQt5 import QtGui, QtCore, Qt, QtWidgets
> >>>
> >>> ImportError: No module named PyQt5
> >>>
> >>>
> >>>
> >>> If I run:
> >>>
> >>>
> >>>
> >>> python3
> >>> ~/gr-lilacsat-pyqt5/examples/BY70-2/DSLWP-Downlink-
> >> Proxy/mun_downlink_
> >>> proxy.py
> >>>
> >>>
> >>>
> >>> I get:
> >>>
> >>>
> >>>
> >>> Traceback (most recent call last):
> >>>
> >>> File
> >>> "/home/enzo/gr-lilacsat-pyqt5/examples/BY70-2/DSLWP-Downlink-
> >> Proxy/mun
> >>> _downlink_proxy.py",
> >>> line 29, in <module>
> >>>
> >>> import urllib2
> >>>
> >>> ModuleNotFoundError: No module named 'urllib2'
> >>>
> >>>
> >>>
> >>> Please which is the correct command and how to solve the error?
> >>>
> >>> Thanks
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> 73's de Enzo IK8OZV
> >>> EasyLog 5 BetaTester
> >>> EasyLog PDA BetaTester
> >>> WinBollet BetaTester
> >>> D.C.I. CheckPoint Regione Campania
> >>> Skype: ik8ozv8520
> >>>
> >>>
> >>>
> >>>
> >>> *********************************
> >>>
> >>> ****** GSM +39 328 7110193 ******
> >>>
> >>> ***** SMS +39 328 7110193 *****
> >>>
> >>> *********************************
> >>>
> >>>
> >>>
> >
> >
> >
- Re: Cannot run a command, (continued)
- R: Cannot run a command, Vincenzo Mone, 2020/09/02
- Message not available
- R: R: Cannot run a command, Vincenzo Mone, 2020/09/06
- Message not available
- R: R: Cannot run a command, Vincenzo Mone, 2020/09/06
- Message not available
- R: R: Cannot run a command, Vincenzo Mone, 2020/09/07
- Message not available
- Message not available
- Message not available
- R: R: Cannot run a command, Vincenzo Mone, 2020/09/07