freecycle-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freecycle-users] Debian SID + Freecycle


From: luigi curzi
Subject: Re: [Freecycle-users] Debian SID + Freecycle
Date: Mon, 3 Dec 2007 14:37:48 +0100

Il giorno Mon, 3 Dec 2007 14:33:39 +0100
Predrag Viceic <address@hidden> ha scritto:

> Le Monday 03 December 2007 14.25:02 luigi curzi, vous avez écrit :
> > Il giorno Mon, 3 Dec 2007 14:08:07 +0100
> >
> > Predrag Viceic <address@hidden> ha scritto:
> > > Hi,
> > >
> > > I have tested the svn version (MAINTENANCE_0_0_ALPHA) and it works
> > > with
> > >
> > > alsa-1.0.14-31
> > > jack-0.103.0-55
> >
> > i have:
> > Advanced Linux Sound Architecture Driver Version 1.0.14 (from
> > vanilla kernel 2.22.1)
> > jackd 0.103.0-6 (last version on debian unstable)
> >
> > > both are default OpenSuSE 10.3 bulds. Freecycle works with ALSA
> > > and Jack.
> 
> So with that versions, Freecycle from the repo launches, doesn't
> segfault but fails to connect to ALSA or Jack ?
> 

freecycle, from debian repo, with these versions of alsa and jack,
"works", but doesn't play any sound. moreover, it doesn't connect to
jack, but i think that debian version of freecycle doesn't have
compiled-in jack support:
Depends: fftw3, libaubio2, libc6 (>= 2.5-5), libfontconfig1 (>= 2.4.0),
libgcc1 (>= 1:4.2-20070516), libice6 (>= 1:1.0.0), libjpeg62,
libpng12-0 (>= 1.2.13-4), libqt3-mt (>= 3:3.3.7), libsm6, libsndfile1,
libsoundtouch1c2 (>= 1.3.0), libstdc++6 (>= 4.2-20070516), libx11-6,
libxext6, zlib1g

i don't see any jack library.

> 
> > >
> > > Predrag
> >
> > luigi
> >
> > > Le Monday 03 December 2007 13.26:20 luigi curzi, vous avez écrit :
> > > > Il giorno Mon, 3 Dec 2007 13:14:42 +0100
> > > >
> > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > also maintenance branch version goes in segmentation fault.
> > > > > > i can use gdb, but how?
> > > > >
> > > > > you can launch freecycle with
> > > > >
> > > > > gdb ./freecycle
> > > > >
> > > > > and then type "run".
> > > > >
> > > > > After the segfault you type "bt" and send the output.
> > > >
> > > > this is the output:
> > > > #0  0x4f600480 in poll () from /lib/i686/cmov/libc.so.6
> > > > Cannot access memory at address 0x20832c
> > > >
> > > > and now?
> > > >
> > > > > Prderag
> > > >
> > > > ciao
> > > > Luigi
> > > >
> > > > > Le Monday 03 December 2007 13.06:34 luigi curzi, vous avez
> > > > > écrit :
> > > > > > Il giorno Mon, 3 Dec 2007 12:37:08 +0100
> > > > > >
> > > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > > > how can i download MAINTENANCE_0_6_ALPHA?
> > > > > > >
> > > > > > > cvs
> > > > > > > -d:pserver:address@hidden:/sources/freecycle
> > > > > > > co -rMAINTENANCE_0_6_ALPHA freecycle
> > > > > >
> > > > > > also maintenance branch version goes in segmentation fault.
> > > > > > i can use gdb, but how?
> > > > > >
> > > > > > > Cheers,
> > > > > > > Predrag
> > > > > >
> > > > > > Luigi
> > > > > >
> > > > > > > Le Monday 03 December 2007 11.46:47 luigi curzi, vous avez
> > > > > > >
> > > > > > > écrit :
> > > > > > > > Il giorno Mon, 3 Dec 2007 08:09:19 +0100
> > > > > > > >
> > > > > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > > > > Hi Luigi,
> > > > > > > > >
> > > > > > > > > See my answers below.
> > > > > > > > >
> > > > > > > > > Le Saturday 01 December 2007 21.20:12 luigi curzi,
> > > > > > > > > vous avez
> > > > > > > > >
> > > > > > > > > écrit :
> > > > > > > > > > i try to use Freecyle on a updated Debian Sid:
> > > > > > > > > > 1) freecycle on repository doesn't play any sound, i
> > > > > > > > > > think it is because freecyle has some problem with
> > > > > > > > > > alsa but it doesn't connect to jack.
> > > > > > > > >
> > > > > > > > > This is strange. I have thought that ALSA was ok
> > > > > > > > > again..must check. As for Jack, I don't see why it
> > > > > > > > > shouldn't connect.
> > > > > > > >
> > > > > > > > i read on the mailing list that freecycle has problem
> > > > > > > > with alsa version 1.14, in my kernel, 2.22.1 with
> > > > > > > > realtime patch, i have this version of alsa. also, i
> > > > > > > > try with alsa 1.15, downloaded from internet, and it
> > > > > > > > doesn't play. i use freecycle 0.6 alpha from debian
> > > > > > > > official repository.
> > > > > > > >
> > > > > > > > > > 2) freecycle downloaded from site (any version:
> > > > > > > > > > static build and source) gives a segmentation fault:
> > > > > > > > > > ALSA sequencer successfully opened.
> > > > > > > > > > created the MIDI port 129:0 Freecycle
> > > > > > > > > > A:0.1,0.05,0.5,H:0.1,D:0.1,0.25,1,S:1,R:0.1,0.95,0.5,Dur:10
> > > > > > > > > >00,R es:1 00,M
> > > > > > > > > >
> > > > > > > > > >:1 Querying Jack...
> > > > > > > > > >
> > > > > > > > > > JACK tmpdir identified as [/dev/shm]
> > > > > > > > > > Connected to JACK.
> > > > > > > > > > Segmentation fault
> > > > > > > > >
> > > > > > > > > Well, static builds are meant to be executed with the
> > > > > > > > > very same version of the "missing" libs, at the time
> > > > > > > > > i have compiled this under SuSE 9.3, at least I think
> > > > > > > > > so.
> > > > > > > > >
> > > > > > > > > Which static build have you tried? Have you tried to
> > > > > > > > > launch static Freecycle with gdb?
> > > > > > > > >
> > > > > > > > > I think I should rebuild those builds again
> > > > > > > > > anyways....
> > > > > > > >
> > > > > > > > i tried any version of static build with o without qt
> > > > > > > > libraries. no, i don't use gdb.
> > > > > > > >
> > > > > > > > > > 3) svn version doesn't compile here
> > > > > > > > >
> > > > > > > > > Did you try the MAINTENANCE_0_6_ALPHA branch ?(I
> > > > > > > > > suppose you are talking about CVS) What are the
> > > > > > > > > compile errors?
> > > > > > > >
> > > > > > > > how can i download MAINTENANCE_0_6_ALPHA?
> > > > > > > > i use instructions on savannah with <module
> > > > > > > > name>=freecycle. i receive a long list of missing
> > > > > > > > name>dependencies (libqt4) that
> > > > > > > > i have installed; i try to add some line in cond.pri (or
> > > > > > > > something similar) file, but, after some test, i can't
> > > > > > > > resolve.
> > > > > > > >
> > > > > > > > > Regards,
> > > > > > > > >
> > > > > > > > > Predrag
> > > > > > > >
> > > > > > > > thanks
> > > > > > > > Luigi
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Freecycle-users mailing list
> > > > > > > address@hidden
> > > > > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> > > > >
> > > > > _______________________________________________
> > > > > Freecycle-users mailing list
> > > > > address@hidden
> > > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> > >
> > > _______________________________________________
> > > Freecycle-users mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> 
> 
> _______________________________________________
> Freecycle-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/freecycle-users


-- 
~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
Io sono 
lo sbaglio, il momento di confusione, l'inopportuno

                Non sono niente.
              Non sarò mai niente.
        Non posso volere d'essere niente.
A parte questo, ho in me tutti i sogni del mondo.

                                        F. Pessoa
~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*




reply via email to

[Prev in Thread] Current Thread [Next in Thread]