Re: [Freecycle-users] Debian SID + Freecycle

[Predrag Viceic]

> it was that the entire output.
> i haven't any other lines after ladspa initialization:

Well..it seems then that the debian-sid Freecycle is compiled without  sound 
support (?!?)

Predrag

Le Monday 03 December 2007 14.59:04 luigi curzi, vous avez écrit :
> Il giorno Mon, 3 Dec 2007 14:58:47 +0100
>
> Predrag Viceic <address@hidden> ha scritto:
> > Well, I need al the output after LADSPA initialisation:
> >
> > i.e.
> > [....]
> > Crossfade loaded
> > Crossfade (4 outs) loaded
> > -----------file: zm1_1428.so
> > z-1 loaded
> > ...End.
> > ALSA sequencer successfully opened.
> > created the MIDI port 128:0 Freecycle
> > A:0.1,0.05,0.5,H:0.1,D:0.1,0.25,1,S:1,R:0.1,0.95,0.5,Dur:1000,Res:100,M:1
> > Querying Jack...
> > JACK tmpdir identified as [/dev/shm]
> > Can't connect to JACK
> > Querying Alsa...
> > Initialised ALSA -  device: plughw:0,0 rate: 44100 channels: 2
> > periods: 2 buffer size: 2048 frames: 1024 period size: 4096 latency:
> > 23.2727 ms
>
> it was that the entire output.
> i haven't any other lines after ladspa initialization:
> z-1 loaded
> ...End.
> A:0.1,0.05,0.5,H:0.1,D:0.1,0.25,1,S:1,R:0.1,0.95,0.5,Dur:1000,Res:100,M:1
> Oh, anyways we need no sound..Aren't we?
>
> > Le Monday 03 December 2007 14.50:54 luigi curzi, vous avez écrit :
> > > Il giorno Mon, 3 Dec 2007 14:48:46 +0100
> > >
> > > Predrag Viceic <address@hidden> ha scritto:
> > > > > freecycle, from debian repo, with these versions of alsa and
> > > > > jack, "works", but doesn't play any sound.
> > > >
> > > > So, upon Freecycle launch (before you try to do anything) what are
> > > > the Freecycle's last words (in the console) ?
> > >
> > > A:0.1,0.05,0.5,H:0.1,D:0.1,0.25,1,S:1,R:0.1,0.95,0.5,Dur:1000,Res:100,M
> > >:1 Oh, anyways we need no sound..Aren't we?
> > >
> > > mmmm... sounds strange...
> > >
> > > > Le Monday 03 December 2007 14.37:48 luigi curzi, vous avez écrit :
> > > > > Il giorno Mon, 3 Dec 2007 14:33:39 +0100
> > > > >
> > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > Le Monday 03 December 2007 14.25:02 luigi curzi, vous avez
> > > > > >
> > > > > > écrit :
> > > > > > > Il giorno Mon, 3 Dec 2007 14:08:07 +0100
> > > > > > >
> > > > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > I have tested the svn version (MAINTENANCE_0_0_ALPHA) and
> > > > > > > > it works with
> > > > > > > >
> > > > > > > > alsa-1.0.14-31
> > > > > > > > jack-0.103.0-55
> > > > > > >
> > > > > > > i have:
> > > > > > > Advanced Linux Sound Architecture Driver Version 1.0.14
> > > > > > > (from vanilla kernel 2.22.1)
> > > > > > > jackd 0.103.0-6 (last version on debian unstable)
> > > > > > >
> > > > > > > > both are default OpenSuSE 10.3 bulds. Freecycle works with
> > > > > > > > ALSA and Jack.
> > > > > >
> > > > > > So with that versions, Freecycle from the repo launches,
> > > > > > doesn't segfault but fails to connect to ALSA or Jack ?
> > > > >
> > > > > freecycle, from debian repo, with these versions of alsa and
> > > > > jack, "works", but doesn't play any sound. moreover, it doesn't
> > > > > connect to jack, but i think that debian version of freecycle
> > > > > doesn't have compiled-in jack support:
> > > > > Depends: fftw3, libaubio2, libc6 (>= 2.5-5), libfontconfig1 (>=
> > > > > 2.4.0), libgcc1 (>= 1:4.2-20070516), libice6 (>= 1:1.0.0),
> > > > > libjpeg62, libpng12-0 (>= 1.2.13-4), libqt3-mt (>= 3:3.3.7),
> > > > > libsm6, libsndfile1, libsoundtouch1c2 (>= 1.3.0), libstdc++6 (>=
> > > > > 4.2-20070516), libx11-6, libxext6, zlib1g
> > > > >
> > > > > i don't see any jack library.
> > > > >
> > > > > > > > Predrag
> > > > > > >
> > > > > > > luigi
> > > > > > >
> > > > > > > > Le Monday 03 December 2007 13.26:20 luigi curzi, vous avez
> > > > > > > >
> > > > > > > > écrit :
> > > > > > > > > Il giorno Mon, 3 Dec 2007 13:14:42 +0100
> > > > > > > > >
> > > > > > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > > > > > > also maintenance branch version goes in segmentation
> > > > > > > > > > > fault. i can use gdb, but how?
> > > > > > > > > >
> > > > > > > > > > you can launch freecycle with
> > > > > > > > > >
> > > > > > > > > > gdb ./freecycle
> > > > > > > > > >
> > > > > > > > > > and then type "run".
> > > > > > > > > >
> > > > > > > > > > After the segfault you type "bt" and send the output.
> > > > > > > > >
> > > > > > > > > this is the output:
> > > > > > > > > #0  0x4f600480 in poll () from /lib/i686/cmov/libc.so.6
> > > > > > > > > Cannot access memory at address 0x20832c
> > > > > > > > >
> > > > > > > > > and now?
> > > > > > > > >
> > > > > > > > > > Prderag
> > > > > > > > >
> > > > > > > > > ciao
> > > > > > > > > Luigi
> > > > > > > > >
> > > > > > > > > > Le Monday 03 December 2007 13.06:34 luigi curzi, vous
> > > > > > > > > > avez
> > > > > > > > > >
> > > > > > > > > > écrit :
> > > > > > > > > > > Il giorno Mon, 3 Dec 2007 12:37:08 +0100
> > > > > > > > > > >
> > > > > > > > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > > > > > > > > how can i download MAINTENANCE_0_6_ALPHA?
> > > > > > > > > > > >
> > > > > > > > > > > > cvs
> > > > > > > > > > > > -d:pserver:address@hidden:/sources
> > > > > > > > > > > >/fre ecyc le co -rMAINTENANCE_0_6_ALPHA freecycle
> > > > > > > > > > >
> > > > > > > > > > > also maintenance branch version goes in segmentation
> > > > > > > > > > > fault. i can use gdb, but how?
> > > > > > > > > > >
> > > > > > > > > > > > Cheers,
> > > > > > > > > > > > Predrag
> > > > > > > > > > >
> > > > > > > > > > > Luigi
> > > > > > > > > > >
> > > > > > > > > > > > Le Monday 03 December 2007 11.46:47 luigi curzi,
> > > > > > > > > > > > vous avez
> > > > > > > > > > > >
> > > > > > > > > > > > écrit :
> > > > > > > > > > > > > Il giorno Mon, 3 Dec 2007 08:09:19 +0100
> > > > > > > > > > > > >
> > > > > > > > > > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > > > > > > > > > Hi Luigi,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > See my answers below.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Le Saturday 01 December 2007 21.20:12 luigi
> > > > > > > > > > > > > > curzi, vous avez
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > écrit :
> > > > > > > > > > > > > > > i try to use Freecyle on a updated Debian
> > > > > > > > > > > > > > > Sid: 1) freecycle on repository doesn't
> > > > > > > > > > > > > > > play any sound, i think it is because
> > > > > > > > > > > > > > > freecyle has some problem with alsa but it
> > > > > > > > > > > > > > > doesn't connect to jack.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > This is strange. I have thought that ALSA was
> > > > > > > > > > > > > > ok again..must check. As for Jack, I don't
> > > > > > > > > > > > > > see why it shouldn't connect.
> > > > > > > > > > > > >
> > > > > > > > > > > > > i read on the mailing list that freecycle has
> > > > > > > > > > > > > problem with alsa version 1.14, in my kernel,
> > > > > > > > > > > > > 2.22.1 with realtime patch, i have this version
> > > > > > > > > > > > > of alsa. also, i try with alsa 1.15, downloaded
> > > > > > > > > > > > > from internet, and it doesn't play. i use
> > > > > > > > > > > > > freecycle 0.6 alpha from debian official
> > > > > > > > > > > > > repository.
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > 2) freecycle downloaded from site (any
> > > > > > > > > > > > > > > version: static build and source) gives a
> > > > > > > > > > > > > > > segmentation fault: ALSA sequencer
> > > > > > > > > > > > > > > successfully opened. created the MIDI port
> > > > > > > > > > > > > > > 129:0 Freecycle
> > > > > > > > > > > > > > > A:0.1,0.05,0.5,H:0.1,D:0.1,0.25,1,S:1,R:0.1,0.9
> > > > > > > > > > > > > > >5,0. 5,Du r:10 00,R es:1 00,M
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >:1 Querying Jack...
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > JACK tmpdir identified as [/dev/shm]
> > > > > > > > > > > > > > > Connected to JACK.
> > > > > > > > > > > > > > > Segmentation fault
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Well, static builds are meant to be executed
> > > > > > > > > > > > > > with the very same version of the "missing"
> > > > > > > > > > > > > > libs, at the time i have compiled this under
> > > > > > > > > > > > > > SuSE 9.3, at least I think so.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Which static build have you tried? Have you
> > > > > > > > > > > > > > tried to launch static Freecycle with gdb?
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I think I should rebuild those builds again
> > > > > > > > > > > > > > anyways....
> > > > > > > > > > > > >
> > > > > > > > > > > > > i tried any version of static build with o
> > > > > > > > > > > > > without qt libraries. no, i don't use gdb.
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > 3) svn version doesn't compile here
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Did you try the MAINTENANCE_0_6_ALPHA
> > > > > > > > > > > > > > branch ?(I suppose you are talking about CVS)
> > > > > > > > > > > > > > What are the compile errors?
> > > > > > > > > > > > >
> > > > > > > > > > > > > how can i download MAINTENANCE_0_6_ALPHA?
> > > > > > > > > > > > > i use instructions on savannah with <module
> > > > > > > > > > > > > name>=freecycle. i receive a long list of
> > > > > > > > > > > > > name>missing dependencies (libqt4) that
> > > > > > > > > > > > > i have installed; i try to add some line in
> > > > > > > > > > > > > cond.pri (or something similar) file, but, after
> > > > > > > > > > > > > some test, i can't resolve.
> > > > > > > > > > > > >
> > > > > > > > > > > > > > Regards,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Predrag
> > > > > > > > > > > > >
> > > > > > > > > > > > > thanks
> > > > > > > > > > > > > Luigi
> > > > > > > > > > > >
> > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > Freecycle-users mailing list
> > > > > > > > > > > > address@hidden
> > > > > > > > > > > > http://lists.nongnu.org/mailman/listinfo/freecycle-us
> > > > > > > > > > > >ers
> > > > > > > > > >
> > > > > > > > > > _______________________________________________
> > > > > > > > > > Freecycle-users mailing list
> > > > > > > > > > address@hidden
> > > > > > > > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Freecycle-users mailing list
> > > > > > > > address@hidden
> > > > > > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> > > > > >
> > > > > > _______________________________________________
> > > > > > Freecycle-users mailing list
> > > > > > address@hidden
> > > > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> > > >
> > > > _______________________________________________
> > > > Freecycle-users mailing list
> > > > address@hidden
> > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> >
> > _______________________________________________
> > Freecycle-users mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/freecycle-users