freecycle-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freecycle-users] Debian SID + Freecycle


From: Predrag Viceic
Subject: Re: [Freecycle-users] Debian SID + Freecycle
Date: Mon, 3 Dec 2007 14:58:47 +0100
User-agent: KMail/1.9.6 (enterprise 20070904.708012)

Well, I need al the output after LADSPA initialisation:

i.e.
[....]
Crossfade loaded
Crossfade (4 outs) loaded
-----------file: zm1_1428.so
z-1 loaded
...End.
ALSA sequencer successfully opened.
created the MIDI port 128:0 Freecycle
A:0.1,0.05,0.5,H:0.1,D:0.1,0.25,1,S:1,R:0.1,0.95,0.5,Dur:1000,Res:100,M:1
Querying Jack...
JACK tmpdir identified as [/dev/shm]
Can't connect to JACK
Querying Alsa...
Initialised ALSA -  device: plughw:0,0 rate: 44100 channels: 2 periods: 2 
buffer size: 2048 frames: 1024 period size: 4096 latency: 23.2727 ms


Le Monday 03 December 2007 14.50:54 luigi curzi, vous avez écrit :
> Il giorno Mon, 3 Dec 2007 14:48:46 +0100
>
> Predrag Viceic <address@hidden> ha scritto:
> > > freecycle, from debian repo, with these versions of alsa and jack,
> > > "works", but doesn't play any sound.
> >
> > So, upon Freecycle launch (before you try to do anything) what are
> > the Freecycle's last words (in the console) ?
>
> A:0.1,0.05,0.5,H:0.1,D:0.1,0.25,1,S:1,R:0.1,0.95,0.5,Dur:1000,Res:100,M:1
> Oh, anyways we need no sound..Aren't we?
>
> mmmm... sounds strange...
>
> > Le Monday 03 December 2007 14.37:48 luigi curzi, vous avez écrit :
> > > Il giorno Mon, 3 Dec 2007 14:33:39 +0100
> > >
> > > Predrag Viceic <address@hidden> ha scritto:
> > > > Le Monday 03 December 2007 14.25:02 luigi curzi, vous avez écrit :
> > > > > Il giorno Mon, 3 Dec 2007 14:08:07 +0100
> > > > >
> > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > Hi,
> > > > > >
> > > > > > I have tested the svn version (MAINTENANCE_0_0_ALPHA) and it
> > > > > > works with
> > > > > >
> > > > > > alsa-1.0.14-31
> > > > > > jack-0.103.0-55
> > > > >
> > > > > i have:
> > > > > Advanced Linux Sound Architecture Driver Version 1.0.14 (from
> > > > > vanilla kernel 2.22.1)
> > > > > jackd 0.103.0-6 (last version on debian unstable)
> > > > >
> > > > > > both are default OpenSuSE 10.3 bulds. Freecycle works with
> > > > > > ALSA and Jack.
> > > >
> > > > So with that versions, Freecycle from the repo launches, doesn't
> > > > segfault but fails to connect to ALSA or Jack ?
> > >
> > > freecycle, from debian repo, with these versions of alsa and jack,
> > > "works", but doesn't play any sound. moreover, it doesn't connect to
> > > jack, but i think that debian version of freecycle doesn't have
> > > compiled-in jack support:
> > > Depends: fftw3, libaubio2, libc6 (>= 2.5-5), libfontconfig1 (>=
> > > 2.4.0), libgcc1 (>= 1:4.2-20070516), libice6 (>= 1:1.0.0),
> > > libjpeg62, libpng12-0 (>= 1.2.13-4), libqt3-mt (>= 3:3.3.7),
> > > libsm6, libsndfile1, libsoundtouch1c2 (>= 1.3.0), libstdc++6 (>=
> > > 4.2-20070516), libx11-6, libxext6, zlib1g
> > >
> > > i don't see any jack library.
> > >
> > > > > > Predrag
> > > > >
> > > > > luigi
> > > > >
> > > > > > Le Monday 03 December 2007 13.26:20 luigi curzi, vous avez
> > > > > >
> > > > > > écrit :
> > > > > > > Il giorno Mon, 3 Dec 2007 13:14:42 +0100
> > > > > > >
> > > > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > > > > also maintenance branch version goes in segmentation
> > > > > > > > > fault. i can use gdb, but how?
> > > > > > > >
> > > > > > > > you can launch freecycle with
> > > > > > > >
> > > > > > > > gdb ./freecycle
> > > > > > > >
> > > > > > > > and then type "run".
> > > > > > > >
> > > > > > > > After the segfault you type "bt" and send the output.
> > > > > > >
> > > > > > > this is the output:
> > > > > > > #0  0x4f600480 in poll () from /lib/i686/cmov/libc.so.6
> > > > > > > Cannot access memory at address 0x20832c
> > > > > > >
> > > > > > > and now?
> > > > > > >
> > > > > > > > Prderag
> > > > > > >
> > > > > > > ciao
> > > > > > > Luigi
> > > > > > >
> > > > > > > > Le Monday 03 December 2007 13.06:34 luigi curzi, vous avez
> > > > > > > >
> > > > > > > > écrit :
> > > > > > > > > Il giorno Mon, 3 Dec 2007 12:37:08 +0100
> > > > > > > > >
> > > > > > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > > > > > > how can i download MAINTENANCE_0_6_ALPHA?
> > > > > > > > > >
> > > > > > > > > > cvs
> > > > > > > > > > -d:pserver:address@hidden:/sources/fre
> > > > > > > > > >ecyc le co -rMAINTENANCE_0_6_ALPHA freecycle
> > > > > > > > >
> > > > > > > > > also maintenance branch version goes in segmentation
> > > > > > > > > fault. i can use gdb, but how?
> > > > > > > > >
> > > > > > > > > > Cheers,
> > > > > > > > > > Predrag
> > > > > > > > >
> > > > > > > > > Luigi
> > > > > > > > >
> > > > > > > > > > Le Monday 03 December 2007 11.46:47 luigi curzi, vous
> > > > > > > > > > avez
> > > > > > > > > >
> > > > > > > > > > écrit :
> > > > > > > > > > > Il giorno Mon, 3 Dec 2007 08:09:19 +0100
> > > > > > > > > > >
> > > > > > > > > > > Predrag Viceic <address@hidden> ha scritto:
> > > > > > > > > > > > Hi Luigi,
> > > > > > > > > > > >
> > > > > > > > > > > > See my answers below.
> > > > > > > > > > > >
> > > > > > > > > > > > Le Saturday 01 December 2007 21.20:12 luigi curzi,
> > > > > > > > > > > > vous avez
> > > > > > > > > > > >
> > > > > > > > > > > > écrit :
> > > > > > > > > > > > > i try to use Freecyle on a updated Debian Sid:
> > > > > > > > > > > > > 1) freecycle on repository doesn't play any
> > > > > > > > > > > > > sound, i think it is because freecyle has some
> > > > > > > > > > > > > problem with alsa but it doesn't connect to
> > > > > > > > > > > > > jack.
> > > > > > > > > > > >
> > > > > > > > > > > > This is strange. I have thought that ALSA was ok
> > > > > > > > > > > > again..must check. As for Jack, I don't see why it
> > > > > > > > > > > > shouldn't connect.
> > > > > > > > > > >
> > > > > > > > > > > i read on the mailing list that freecycle has
> > > > > > > > > > > problem with alsa version 1.14, in my kernel,
> > > > > > > > > > > 2.22.1 with realtime patch, i have this version of
> > > > > > > > > > > alsa. also, i try with alsa 1.15, downloaded from
> > > > > > > > > > > internet, and it doesn't play. i use freecycle 0.6
> > > > > > > > > > > alpha from debian official repository.
> > > > > > > > > > >
> > > > > > > > > > > > > 2) freecycle downloaded from site (any version:
> > > > > > > > > > > > > static build and source) gives a segmentation
> > > > > > > > > > > > > fault: ALSA sequencer successfully opened.
> > > > > > > > > > > > > created the MIDI port 129:0 Freecycle
> > > > > > > > > > > > > A:0.1,0.05,0.5,H:0.1,D:0.1,0.25,1,S:1,R:0.1,0.95,0.
> > > > > > > > > > > > >5,Du r:10 00,R es:1 00,M
> > > > > > > > > > > > >
> > > > > > > > > > > > >:1 Querying Jack...
> > > > > > > > > > > > >
> > > > > > > > > > > > > JACK tmpdir identified as [/dev/shm]
> > > > > > > > > > > > > Connected to JACK.
> > > > > > > > > > > > > Segmentation fault
> > > > > > > > > > > >
> > > > > > > > > > > > Well, static builds are meant to be executed with
> > > > > > > > > > > > the very same version of the "missing" libs, at
> > > > > > > > > > > > the time i have compiled this under SuSE 9.3, at
> > > > > > > > > > > > least I think so.
> > > > > > > > > > > >
> > > > > > > > > > > > Which static build have you tried? Have you tried
> > > > > > > > > > > > to launch static Freecycle with gdb?
> > > > > > > > > > > >
> > > > > > > > > > > > I think I should rebuild those builds again
> > > > > > > > > > > > anyways....
> > > > > > > > > > >
> > > > > > > > > > > i tried any version of static build with o without
> > > > > > > > > > > qt libraries. no, i don't use gdb.
> > > > > > > > > > >
> > > > > > > > > > > > > 3) svn version doesn't compile here
> > > > > > > > > > > >
> > > > > > > > > > > > Did you try the MAINTENANCE_0_6_ALPHA branch ?(I
> > > > > > > > > > > > suppose you are talking about CVS) What are the
> > > > > > > > > > > > compile errors?
> > > > > > > > > > >
> > > > > > > > > > > how can i download MAINTENANCE_0_6_ALPHA?
> > > > > > > > > > > i use instructions on savannah with <module
> > > > > > > > > > > name>=freecycle. i receive a long list of missing
> > > > > > > > > > > name>dependencies (libqt4) that
> > > > > > > > > > > i have installed; i try to add some line in
> > > > > > > > > > > cond.pri (or something similar) file, but, after
> > > > > > > > > > > some test, i can't resolve.
> > > > > > > > > > >
> > > > > > > > > > > > Regards,
> > > > > > > > > > > >
> > > > > > > > > > > > Predrag
> > > > > > > > > > >
> > > > > > > > > > > thanks
> > > > > > > > > > > Luigi
> > > > > > > > > >
> > > > > > > > > > _______________________________________________
> > > > > > > > > > Freecycle-users mailing list
> > > > > > > > > > address@hidden
> > > > > > > > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Freecycle-users mailing list
> > > > > > > > address@hidden
> > > > > > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> > > > > >
> > > > > > _______________________________________________
> > > > > > Freecycle-users mailing list
> > > > > > address@hidden
> > > > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> > > >
> > > > _______________________________________________
> > > > Freecycle-users mailing list
> > > > address@hidden
> > > > http://lists.nongnu.org/mailman/listinfo/freecycle-users
> >
> > _______________________________________________
> > Freecycle-users mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/freecycle-users




reply via email to

[Prev in Thread] Current Thread [Next in Thread]